PENICILLIN V Property

Melting point:

120-1280C (dec)

Boiling point:

681.4±55.0 °C(Predicted)

Density 

1.3121 (rough estimate)

refractive index 

1.6510 (estimate)

storage temp. 

−20°C

solubility 

Very slightly soluble in water, soluble in ethanol (96 per cent).

pka

2.44±0.50(Predicted)

form 

A solid

Stability:

Stable. Combustible. Incompatible with strong oxidizing agents.

EPA Substance Registry System

Penicillin V (87-08-1)

Safety

Hazard Codes 

Xn

Risk Statements 

42/43

Safety Statements 

22-36

RTECS 

RY4025000

HS Code 

29411094

Hazardous Substances Data

87-08-1(Hazardous Substances Data)

Toxicity

LD50 oral in rat: > 2220mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H317May cause an allergic skin reaction

H334May cause allergy or asthma symptoms or breathing difficulties if inhaled

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P272Contaminated work clothing should not be allowed out of the workplace.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P285In case of inadequate ventilation wear respiratory protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P304+P341IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.

P321Specific treatment (see … on this label).

P333+P313IF SKIN irritation or rash occurs: Get medical advice/attention.

P342+P311IF experiencing respiratory symptoms: call a POISON CENTER or doctor/physician.

P363Wash contaminated clothing before reuse.

P501Dispose of contents/container to..…

PENICILLIN V Chemical Properties,Usage,Production

Chemical Properties

Crystalline Solid

Uses

Penicillin antibacterial.

Uses

Phenoxymethylpenicillin or penicillin V is acid-resistant and used instead of penicillin G for oral use. It is active with respect to Gram-positive (staphylococcus, streptococcus, pneumococcus), and Gram-negative (meningococcus, gonococcus) cocci, spirochaeta, clostridia, and corynebacteria.
Phenoxymethylpenicillin is used for bronchitis, pneumonia, angina, scarlet fever, gonorrhea, syphilis, purulent skin and soft-tissue wounds, and other infectious diseases. Synonyms of this drug are bermycin, isocillin, cristapen, fenospen, uticillin, and others.

Uses

Penicillin V is an antibacterial agent. This compound is a contaminant of emerging concern (CECs).

Definition

ChEBI: Phenoxymethylpenicillin is a penicillin compound having a 6beta-(phenoxyacetyl)amino side-chain. It is a penicillin allergen and a penicillin. It is a conjugate acid of a phenoxymethylpenicillin(1-).

Application

Phenoxymethylpenicillin was produced in the culture broth of Penicillium chrysogenum when phenoxyacetic acid was added to the medium at Biochemie in 1953. It is more stable against acid than benzylpenicillin and is used as an orally active penicillin. Its therapeutic applications are the same as those of benzylpenicillin.

brand name

V-Cillin(Lilly).

Antimicrobial activity

The antibacterial spectrum and level of activity are similar to that of benzylpenicillin. Enteric Gram-negative bacilli are highly resistant.

General Description

White crystalline powder.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

Stable in air up to 37%; relatively stable to acid. PENICILLIN V is incompatible with acids, oxidizing agents (especially in the presence of trace metals), heavy metal ions such as copper, lead, zinc and mercury; glycerol, sympathomimetic amines, thiomersal, wood alcohols, cetostearyl alcohol, hard paraffins, macrogols, cocoa butter and many ionic an nonionic surface-active agents. PENICILLIN V is also incompatible with alkalis, compounds leached from vulcanized rubber, hydrochlorides of tetracyclines and organic peroxides. Other incompatibilities include reducing agents, alcohols, other hydroxy compounds, self-emulsifying stearyl alcohol, emulsifying wax, lanolin, crude cholinesterated bases, glycol, sugars, amines, aminacrine hydrochloride, ephedrine, procaine, rubber tubing, thiamine hydrochloride, zinc oxide, oxidized cellulose, iodine, iodides, thiols, chlorocresol and resorcinol. PENICILLIN V may also be incompatible with naphthalene oils and vitamin B.

Health Hazard

SYMPTOMS: Symptoms of exposure to PENICILLIN V include hypersensitization, skin rashes, contact dermatitis, oral lesions, fever, eosinophilia, interstitial nephritis, angioedema, serum sickness, anaphylaxis, "Arthus" phenomenon; irritation of the Gastrointestinal tract; phlebitis; bronchoconstriction with severe asthma, or abdominal pain, nausea, vomiting, extreme weakness and fall in blood pressure, diarrhea, and purpuric skin eruptions.

Fire Hazard

Flash point data for PENICILLIN V are not available; however PENICILLIN V is probably combustible.

Pharmacokinetics

Oral absorption: 40–70%
C_max 250 mg oral: 2 mg/L after 1 h
Plasma half-life: c. 0.5 h
Volume of distribution: 0.2 L/kg
Plasma protein binding: 80%
Absorption
Owing to acid stability, it is not destroyed in the stomach, but absorption is variable, about 30% remaining in the feces. Absorption is better after administration in the fasting state.
Metabolism and excretion
It is fairly extensively metabolized and degraded in the bowel. Some 60% of the dose is excreted in the urine, 25% in the unchanged form and the remainder as metabolites.

Clinical Use

In 1948, Behrens et al. reported penicillin V, phenoxymethylpenicillin(Pen Vee, V-Cillin) as a biosyntheticproduct. It was not until 1953, however, that its clinicalvalue was recognized by some European scientists. Sincethen, it has enjoyed wide use because of its resistance tohydrolysis by gastric juice and its ability to produce uniformconcentrations in blood (when administered orally). Thefree acid requires about 1,200 mL of water to dissolve 1 g, and it has an activity of 1,695 units/mg. For parenteralsolutions, the potassium salt is usually used. This salt is verysoluble in water. Solutions of it are made from the dry saltat the time of administration. Oral dosage forms of thepotassium salt are also available, providing rapid, effectiveplasma concentrations of this penicillin. The salt of phenoxymethylpenicillinwith N,N'-bis(dehydroabietyl)ethylenediamine(hydrabamine, Compocillin-V) provides a verylong-acting form of this compound. Its high water insolubilitymakes it a desirable compound for aqueous suspensionsused as liquid oral dosage forms.

Clinical Use

It may be prescribed for many indications for which benzylpenicillin is suitable, including streptococcal pharyngitis and skin sepsis, but is not recommended for initial therapy of serious infections. It is useful for continuation therapy after initial control of the disease by parenteral benzylpenicillin when prolonged treatment is required. It has been used prophylactically in recurrent pneumococcal meningitis after head injury and in rheumatic fever. It is not appropriate for infections caused by H. influenzae or Gram-negative bacteria, and is not recommended for the treatment of gonorrhea, syphilis or leptospirosis.

Side effects

Those common to penicillins. As with all penicillins, patients with a history of hypersensitivity to penicillins should be treated cautiously, as serious anaphylactic responses may occur.

Safety Profile

Poison by intraperitoneal, subcutaneous, and intravenous routes. Human systemic effects by ingestion: impaired liver function, dermatitis, fever. Mutation data reported. When heated to decomposition it emits very toxic fumes of SOx and NOx.

Synthesis

Phenoxymethylpenicillin, [2S-(2α,5α,6β)]-3,3-dimethyl-7-oxo- 6-(phenoxyacetamido)-4-thia-1-azabicyclo[3.2.0]-heptan-2-carboxylic acid (32.1.1.2), is also obtained biotechnologically using the fungus P. chrysogenum as the producer and phenoxyacetic acid as the precursor. As with benzylpenicillin, there is a purely synthetic way of making phenoxymethylpenicillin.