Basic information Uses Safety Supplier Related
ChemicalBook >  Product Catalog >  Analytical Chemistry >  Analysis reagents >  General Analytical Reagents >  BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT

BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT

Basic information Uses Safety Supplier Related

BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT Basic information

Product Name:
BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT
Synonyms:
  • BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT
  • bis(4-(1,1,3,3-tetramethylbutyl)phenyl) phosphate ca-salt
  • hemi-Calcium bis[4-(1,1,3,3-tetramethylbutyl)phenyl] phosphate
  • bis[4-(1,1,3,3-tetramethylbutyl)phenyl]phosphate calcium
  • Calcium bis(4-(2,4,4-trimethylpentan-2-yl)phenyl) phosphate
CAS:
40835-97-0
MF:
C28H45CaO4P
MW:
516.72
Mol File:
40835-97-0.mol
More
Less

BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT Chemical Properties

solubility 
THF: soluble2mg/10 mL, clear, colorless
BRN 
7405516
More
Less

Safety Information

WGK Germany 
3
3-10

MSDS

More
Less

BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALT Usage And Synthesis

Uses

bis[4-(1,1,3,3-tetramethylbutyl)phenyl]calcium phosphate can be used to prepare ion-selective electrode (ISE) membranes for the design, construction, and application of electronic tongues (e-tongues) in experimental studies, which operate as virtual instruments based on a potentiometric sensor array employing sequential injection analysis (SIA). It is also used in Raman and UV-Vis spectroscopy to determine the amount of the bulky lipophilic cationic additive tris(2-dodecylmethylammonium chloride) (TDMACl) present in polyaniline (PANI) membranes.

Purification Methods

The Ca diester salt is washed with H2O (x3) and MeOH (x3) alternately and dried in a vacuum oven at 50o. If the Ca salt is contaminated with much Ca salt of the monoester, then it (10g) is converted to the free acid by adding 6N HCl (ca 10volumes) and Et2O (> 50volumes) is added to it and stirred vigorously to form the free acids. When no white precipitate remains (ca 5minutes), the Et2O is separated, washed with H2O (2x > 50 mL) and dried by filtering through a bed of anhydrous Na2SO4 (11 x 5 cm) which is then washed with Et2O (2x >50 mL). Evaporation gives an oil (TLC RF 0.81 for diester and 0.50 for monoester). The oil is dissolved in *benzene (ca 25mL) and extracted with ethane-1,2-diol (25mL, 10x). After ten washings, a small sample of the *benzene layer is washed twice with H2O to remove the diol and showed that it is pure bis-[4-(1,1,3,3-tetramethylbutyl)-phenyl]phosphoric acid by TLC, i.e. no monophosphate. To form the Ca salt, the oil is dissolved in MeOH and to it is added the equivalent amount of CaCl2 together with aqueous NaOH to keep the pH >10. The resulting white precipitate is collected, washed alternately with 3 batches of H2O and MeOH and dried in a vacuum oven at 50o. [Craggs et al. J Inorg Nucl Chem 40 1483 1978, Morton & Chung Anal Biochem 157 345 1986.] 2,4-Bis-(p -tolylthio)-1,3,2

BIS[4-(1,1,3,3-TETRAMETHYLBUTYL)PHENYL] PHOSPHATE CALCIUM SALTSupplier

Sinopharm Chemical Reagent Co,Ltd.
Tel
86-21-63210123
Email
sj_scrc@sinopharm.com
Tianjin heowns Biochemical Technology Co., Ltd.
Tel
400-6387771-6039 18920764717
Email
sales@heowns.com
VladaChem GmbH
Tel
+49-7246-3082843
Email
info@vladachem.de
Amel Pharmatech Corporation
Tel
027-888-4366503
Email
sales@amelpharmatech.com
Chemsigma International Co., Ltd.
Tel
025-58748998 18951874644
Email
elsa.cheng@chemsigma.com
More
Less