Tin tetrachloride Chemical Properties

Melting point:

-33 °C (lit.)

Boiling point:

114 °C (lit.)

Density 

2.226 g/mL at 25 °C (lit.)

vapor density 

9 (vs air)

vapor pressure 

10 mm Hg ( 10 °C)

refractive index 

1.512

Flash point:

34 °F

storage temp. 

Store at RT.

solubility 

Miscible with alcohol, benzene, toluene, chloroform, acetone, carbon terachloride, gasoline and carbon disulfide.

form 

Solution

Specific Gravity

2.226

color 

Colorless

PH

0.2 (60g/l, H2O, 20℃)Hydrolysis

Water Solubility 

reacts

Sensitive 

Air Sensitive

Hydrolytic Sensitivity

8: reacts rapidly with moisture, water, protic solvents

Merck 

14,8774

Dielectric constant

3.2（22℃）

Exposure limits

ACGIH: TWA 50 ppm
OSHA: TWA 25 ppm; STEL 125 ppm
NIOSH: IDLH 2300 ppm

Stability:

Stability Stable, but may decompose upon exposure to moist air or water. Incompatible with strong bases, alcohols.

LogP

-1.67 at 20℃

CAS DataBase Reference

7646-78-8(CAS DataBase Reference)

NIST Chemistry Reference

Tin tetrachloride(7646-78-8)

EPA Substance Registry System

Stannane, tetrachloro- (7646-78-8)

Safety Information

Hazard Codes 

C,T,F,N

Risk Statements 

34-52/53-40-23/24/25-11-67-37-65-50/53

Safety Statements 

26-45-61-7/8-36/37-24/25-23-36/37/39-16-62

RIDADR 

UN 3264 8/PG 2

WGK Germany 

2

RTECS 

XP8750000

F 

10-21

TSCA 

Yes

HazardClass 

8

PackingGroup 

II

HS Code 

28273990

Hazardous Substances Data

7646-78-8(Hazardous Substances Data)

MSDS

• Language:English Provider:Tetrachloro-stannane
• Language:English Provider:ACROS
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Tin tetrachloride Usage And Synthesis

Chemical Properties

Tin tetrachloride is a colorless fuming liquid with a pungent odor. Tin tetrachloride is soluble in cold water,alcohol,carbon disulfide, and oil of turpentine, that is decomposed by hot water to form hydrochloric acid with the evolution of heat. Tin tetrachloride is corrosive to metals and tissue.Used as a conductive coating and a sugar bleach,and in drugs, ceramics, soaps,and blue printing.

Uses

Tin(IV) chloride is a mordant for dying fabrics; a stabilizer for perfume in soap; used in weighting silk; in ceramic coatings; in manufacturing blue print papers; and to produce fuchsin. Also, tin(IV) chloride is used in preparing many organotin compounds.

Preparation

Tin(IV) chloride is prepared by reacting tin or tin(II) chloride with chlorine:
Sn + 2Cl2 → SnCl4
SnCl2 + Cl2 → SnCl4

Description

Tin (IV) chloride appears as white crystals with a strong pungent chlorine odour. On heating, tin (IV) chloride decomposition emits acrid fumes. At room temperature, it is colourless and releases fumes on contact with air, giving a stinging odour. Stannic chloride was used as a chemical weapon during World War I. It is also used in the glass container industry for making an external coating that toughens the glass. Stannic chloride is used in chemical reactions with fuming (90%) nitric acid for the selective nitration of activated aromatic rings in the presence of unactivated ones. Tin (IV) chloride reacts violently with water or moist air to produce corrosive hydrogen chloride. Tin (IV) chloride reacts with turpentine, alcohols, and amines, causing fire and explosion hazard. It attacks many metals, some forms of plastic, rubber, and coatings.

Chemical Properties

Tin tetrachloride is a colorless fuming liquid.

Chemical Properties

Stannic chloride is a white to yellow powder with a faint odor of HCl.

Chemical Properties

Colorless, fuming, caustic liquid, that water converts into a crystalline solid, SnCl4?5H2O.Keep well stoppered. Soluble in cold water, alcohol, carbon disulfide; decomposed by hot water.

Physical properties

Colorless fuming liquid; corrosive; density 2.234 g/mL; freezes at -33°C; boils at 114.15°C; critical temperature 318.75°C; critical pressure 37.98 atm; critical volume 351 cm³/mol; soluble in cold water, evolving heat; decomposed by hot water; soluble in alcohol, benzene, toluene, chloroform, acetone and kerosene
The pentahydrate is a yellowish-white crystalline solid or small, fused lumps; faint odor of HCl; density 2.04 g/cm³; decmposes at 56°C; very soluble in water; soluble in ethanol.

Uses

Tin(IV) chloride is a precursor to prepare organotin compounds such as tetralkyltin and dialkyldichlorotin(IV), which find applications as catalysts and polymer stabilizers. As a Lewis acid catalyst, it is used in Fridel-Crafts reactions for alkylation and cyclization. It is involved in the selective nitration of aromatic compounds in the presence of fuming nitric acid. Furthermore, it is used to prepare tin(IV) oxide coating by sol-gel process.

Uses

Electroconductive and electroluminescent coatings, mordant in dyeing textiles, perfume stabilization, manufacture of fuchsin, color lakes, ceramic coatings, bleaching agent for sugar, stabilizer for certain resins, manufacture of blueprint and other sensitized papers, other tin salts, bacteria and fungi control in soaps

Preparation

Tin(II) chloride is prepared by dissolving tin in hydrochloric acid followed by evaporation of the solution and crystallization.

Definition

Often sold in the form of the double salt with sodium chloride: Na2SnCl6?H2O.

General Description

Stannic chloride (SnCl₄) is a strong Lewis acid widely used as a promoter or catalyst in organic synthesis. It is soluble in most organic solvents.

Air & Water Reactions

Fumes in moist air. Reacts with water to form Hydrochloric Acid in dense white fumes [Merck 11th ed. 1989].

Reactivity Profile

Acidic salts, such as STANNIC CHLORIDE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions (ethylene oxide polymerization). Combination of the chloride with turpentine is strongly exothermic, and may lead to ignition, [Mellor, 1941, Vol. 7, 446].

Hazard

Evolves heat on contact with moisture. Corrosive liquid

Health Hazard

CORROSIVE and/or TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Fire will produce irritating, corrosive and/or toxic gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Contact with molten substance may cause severe burns to skin and eyes. Runoff from fire control or dilution water may cause pollution.

Fire Hazard

EXCEPT FOR ACETIC ANHYDRIDE (UN1715), THAT IS FLAMMABLE, some of these materials may burn, but none ignite readily. May ignite combustibles (wood, paper, oil, clothing, etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Flammable/toxic gases may accumulate in confined areas (basement, tanks, hopper/tank cars, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. Substance may be transported in a molten form.

Safety Profile

Poison by intraperitoneal route. Moderately toxic by inhalation. A corrosive irritant to skin, eyes, and mucous membranes. Combustible by chemical reaction. Upon contact with moisture, considerable heat is generated. Violent reaction with K, Na, turpentine, ethylene oxide, alkyl nitrates. Dangerous; hydrochloric acid is liberated on contact with moisture or heat. When heated to decomposition it emits toxic fumes of Cl-. See also HYDROCHLORIC ACID.

Potential Exposure

Tin tetrachloride is used in the production of blueprints and electroconductive readings, as a bleaching agent for sugar and resin stabilizer.

Shipping

UN2440 Stannic chloride, pentahydrate, Hazard class: 8; Labels: 8-Corrosive material.

Purification Methods

SnCl4 fumes in moist air due to formation of a hydrate. Fractionate it in a ground glass still and store it in the absence of air. Possible impurities are SO2 and HCl [Baudler in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 729 1963]. It forms a solid pentahydrate [10026-06-9] which smells of HCl and is obtained when the anhydrous salt is dissolved in a small volume of H2O. Also reflux it with clean mercury or P2O5 for several hours, then distil it under (reduced) N2 pressure into a receiver containing P2O5. Finally redistil it. Alternatively, distil it from Sn metal under vacuum in an all-glass system and seal off in large ampoules. SnCl4 is available commercially as 1M solutions in CH2Cl2 or hexane. HARMFUL VAPOURS.

Incompatibilities

Slowly forms hydrochloric acid in cold water; fast reaction in hot water and steam. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, water, turpentine, potassium, sodium, ethylene oxide; nitrates, alcohols, amines, chlorine, strong acids; strong bases. Attacks metals, rubbers and some plastics in the resence of moisture.

Waste Disposal

SnCl4: Pour onto sodium bicarbonate; spray with ammonium hydroxide while adding crushed ice; when reaction subsides, flush down drain.

Tin tetrachloride(7646-78-8)Related Product Information

• Potassium chloride
• Polyvinyl chloride
• Sodium chloride
• Calcium chloride
• Ammonium chloride
• Choline chloride
• Benzyl chloride
• Acetyl chloride
• Tetrachlorosilane
• Titanium tetrachloride
• Iridium tetrachloride
• Carbon tetrachloride
• Tin fluoroborate
• Tin(II) fluoride
• Methylene Chloride
• Tin chloride (SnCl2),TIN CHLORIDE
• Stannic chloride pentahydrate
• AMMONIUM HEXACHLOROSTANNATE(IV)
• Tin Chloride Anhydrous