Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Chemical Reagents >  Organic reagents >  Halogenated aliphatic hydrocarbons >  5-Chloropentanol

5-Chloropentanol

Basic information Safety Supplier Related

5-Chloropentanol Basic information

Product Name:
5-Chloropentanol
Synonyms:
  • PENTAMETHYLENE CHLOROHYDRIN
  • PENTAMETHYLENE CHLOROHYDRIN-5-CHLORO-1-PENTANOL
  • 5-CHLOROPENTANE-1-OL
  • 5-CHLOROPENTANOL
  • 5-Chloropentan-1-ol
  • 5-CHLORO-1-PENTANOL
  • 1-CHLORO-5-PENTANOL
  • 1-CHLORO-5-HYDROXYPENTANE
CAS:
5259-98-3
MF:
C5H11ClO
MW:
122.59
EINECS:
226-067-8
Product Categories:
  • API intermediates
  • omega-Chloroalkanols
  • omega-Functional Alkanols, Carboxylic Acids, Amines & Halides
  • bc0001
Mol File:
5259-98-3.mol
More
Less

5-Chloropentanol Chemical Properties

Boiling point:
107 °C
Density 
1,06 g/cm3
refractive index 
1.454
Flash point:
102-103°C/8mm
storage temp. 
Sealed in dry,2-8°C
solubility 
DMSO, Methanol (Sparingly)
form 
Oil
pka
15.12±0.10(Predicted)
Specific Gravity
1.06
color 
Clear Colourless
Water Solubility 
Slightly soluble in water.
BRN 
1732314
InChIKey
DCBJCKDOZLTTDW-UHFFFAOYSA-N
CAS DataBase Reference
5259-98-3(CAS DataBase Reference)
EPA Substance Registry System
1-Pentanol, 5-chloro- (5259-98-3)
More
Less

Safety Information

Hazard Codes 
Xi
Risk Statements 
22-36/38
Safety Statements 
26-36/37/39
Hazard Note 
Irritant/Harmful
TSCA 
Yes
PackingGroup 
III
HS Code 
2905190098

MSDS

More
Less

5-Chloropentanol Usage And Synthesis

Uses

5-Chloro-1-pentanol is used to produce 6-hydroxy-hexanenitrile at temperature of 90 - 100°C. It is also is an important raw material and intermediate used in organic synthesis, pharmaceuticals and agrochemicals.

Synthesis

20395-28-2

5259-98-3

The general procedure for the synthesis of 5-chloro-1-pentanol from 5-chloropentyl acetate was as follows: 5-chloropentanol-1-acetate (33.9 g, 0.21 mol) was mixed with 95% ethanol (75 mL) and 2N aqueous NaOH (90 mL) according to the method reported by Meyers et al. (Tetrahedron 27, 5979-85), and shaken to homogeneous. The mixed solution was allowed to stand at room temperature for a few hours and the ethanol was subsequently removed by distillation under reduced pressure. The residue was extracted with ether (3 x 150 mL). The extract was dried over anhydrous potassium carbonate, the solvent was removed under reduced pressure and finally 5-chloro-1-pentanol was obtained by distillation as a colorless oil (21.1 g, 84% yield, literature value 72%) with a boiling point of 35-37°C (0.02 mmHg) (literature value 62°C (0.5 mmHg)). The product was characterized by the following data: IR (thin film) cm-1 3330 (broad peak), 2945, 2875, 1455, 1440, 1315, 1295, 1265, 1150, 1075, 1060, 1020, 1000, 965, 900, 740, 725, 655; 1H NMR (200 MHz, CDCl3) δ 3.67 (m, 2H), 3.55 (t, J=6.5 Hz, 2H), 1.82 (pentet, J=7 Hz, 2H), 1.4-1.7 (m, 4H), 1.37 (m, 1H); 13C NMR (22.5 MHz, CDCl3) δ 62.4, 45.0, 32.4, 31.9, 23.2; Mass Spectra (70 eV) m/z (relative abundance) 124, 122 (M+, not observed), 106, 104 (M+ - H2O, 0.7, 1.3), 105 (0.5), 93 (7.1), 91 (20.5), 69 (13.7), 68 (100.0), 67 (13.6), 57 (13.4), 56 (41.4), 55 ( 57.0).

References

[1] Journal of the American Chemical Society, 1983, vol. 105, # 12, p. 4008 - 4017
[2] Synthetic Communications, 1985, vol. 15, # 7, p. 569 - 580
[3] Patent: US5264619, 1993, A
[4] Journal of Organic Chemistry, 1981, vol. 46, # 16, p. 3361 - 3364
[5] Phosphorus and Sulfur and the Related Elements, 1987, vol. 31, p. 161 - 176

5-Chloropentanol Preparation Products And Raw materials

Preparation Products

5-ChloropentanolSupplier

SHANGHAI BANGCHENG CHEMICAL Co.,Ltd. Gold
Tel
021-69106960 13701823733
Email
13701823733@163.com
J & K SCIENTIFIC LTD.
Tel
18210857532; 18210857532
Email
jkinfo@jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006356688 18621169109
Email
market03@meryer.com
3B Pharmachem (Wuhan) International Co.,Ltd.
Tel
821-50328103-801 18930552037
Email
3bsc@sina.com
Alfa Aesar
Tel
400-6106006
Email
saleschina@alfa-asia.com