Lead fluoride Chemical Properties

Melting point:

824 °C(lit.)

Boiling point:

1293 °C

Density 

8.445 g/mL at 25 °C(lit.)

Flash point:

1290°C

form 

powder

color 

White to off-white

Specific Gravity

8.445

Water Solubility 

0.065 g/100 mL (20 ºC)

Merck 

14,5408

Solubility Product Constant (Ksp)

pKsp: 7.48

Exposure limits

ACGIH: TWA 0.05 mg/m3; TWA 2.5 mg/m3
NIOSH: IDLH 100 mg/m3; IDLH 250 mg/m3; TWA 0.050 mg/m3

CAS DataBase Reference

7783-46-2(CAS DataBase Reference)

NIST Chemistry Reference

Lead difluoride(7783-46-2)

EPA Substance Registry System

Lead(II) fluoride (7783-46-2)

Safety Information

Hazard Codes 

T,N

Risk Statements 

61-20/22-33-50/53-62

Safety Statements 

53-45-60-61

RIDADR 

UN 2291 6.1/PG 3

WGK Germany 

3

RTECS 

OG1225000

Hazard Note 

Toxic

TSCA 

Yes

HazardClass 

6.1

PackingGroup 

III

HS Code 

28261990

Hazardous Substances Data

7783-46-2(Hazardous Substances Data)

MSDS

• Language:English Provider:ACROS
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Lead fluoride Usage And Synthesis

Physical Properties

Colorless orthorhombic crystals or white powder; converts to cubic form at 316°C; density 8.445 g/cm3 (orthorhombic form) and 7.750 g/cm3 (cubic form); melts at 855°C; vaporizes at 1,290°C; slightly soluble in water (640 mg/L at 20°C); KSP 7.12x10–7 at 25°C; soluble in nitric acid; insoluble in acetone and ammonia.

Uses

Lead difluoride is used in low melting glasses; in glass coatings to reflect infrared rays; in phosphors for television-tube screens; for nickel plating on glass; and as a catalyst for the manufacture of picoline.

Preparation

Lead difluoride can be prepared by several methods. It is obtained by treating lead hydroxide or lead carbonate with hydrofluoric acid, followed by evaporation of the solution:
Pb(OH)2 + 2HF → PbF2 + 2H2O
Alternatively, it is precipitated by adding hydrofluoric acid to a lead(II) salt solution; or adding potassium fluoride to lead nitrate solution:
2KF + Pb(NO3)2 → PbF2 + 2KNO3
Lead difluoride also can be directly synthesized from its elements, by the action of lead with fluorine.

Toxicity

Slightly to moderately toxic by ingestion and subcutaneous routes. The oral LD50 in rats is around 3,000 mg/kg.

Description

Lead fluoride is a white to colorless, odorlesscrystalline (rhombic, orthorhombic) solid. Molecularweight =245.19; Boiling point=1292℃; Freezing/Meltingpoint = 825℃. Hazard Identification (based on NFPA-704M Rating System): Health 1, Flammability 0, Reactivity 0.Slightly soluble in water.

Chemical Properties

Lead fluoride is a white to colorless, odorless crystalline (rhombic, orthorhombic) solid

Uses

Lead(II) fluoride is used in fuses, glass coatings to reflect infrared rays and phosphors for television screens and in low melting glasses. Further, it serves as a catalyst for the preparation of picoline.

Application

It is used as the transmission window in λ: 250 nm–10 mm and as the prism in the infrared region.

General Description

Odorless white solid. Sinks in water.

Reactivity Profile

Calcium carbide mixed with Lead fluoride , at ordinary temperatures, becomes incandescent [Mellor 5:862-64. 1946-47].

Health Hazard

Not irritating to skin or mucuous membranes; protect against chronic poisoning. Early symptoms of lead intoxication via inhalation or ingestion are most commonly gastrointestinal disorders, colic, constipation, etc.; weakness, which may go on to paralysis chiefly of the extensor muscles of the wrists and less often the ankles, is noticeable in the most serious cases. Ingestion of a large amount causes local irritation of the alimentary tract; pain, leg cramps, muscle weakness, paresthesias, depression, coma, and death may follow in 1 or 2 days. Contact with eyes causes irritation.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.

Potential Exposure

Used to make other chemicals, underwater paints; electronic and optical parts (for growing single-crystal, solid-state lasers); in high-temperature dryfilm lubricants; and making special grades of glass.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Note to physician: Administer saline cathartic and anenema. For relief of colic, administer antispasmodic (calcium gluconate, atropine, papaverine). Consider morphinesulfate for severe pain.Whole blood lead levels, circulating plasma/erythrocytelead concentration ratio, urine ALA, and erythrocyte protoporphyrin fluorescent microscopy may all be useful in monitoring or assessing lead exposure. Chelating agents, such as edetate disodium calcium (Ca EDTA) and penicillamine(not penicillin), are generally useful in the therapy of acutelead intoxication.Antidotes and special procedures for lead: Persons with significant lead poisoning are sometimes treated with CaEDTA while hospitalized. This “chelating” drug causes arush of lead from the body organs into the blood and kidneys, and thus has its own hazards, and must be administered only by highly experienced medical personnel undercontrolled conditions and careful observation. Ca EDTA orsimilar drugs should never be used to prevent poisoningwhile exposure continues or without strict exposure control,as severe kidney damage can result.

storage

Color Code—Blue: Health Hazard/Poison: Storein a secure poison location. Prior to working with thischemical you should be trained on its proper handling andstorage. Store in tightly closed containers in a cool, wellventilated area. Lead is regulated by an OSHA Standard1910.1025. All requirements of the standard must befollowed.

Shipping

UN3288 Toxic solids, inorganic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required. UN2291 Lead compounds, soluble n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required

Incompatibilities

Violent reaction with oxidizers, chemically active metals; calcium carbide. May ignite combustibles, such as wood, paper, oil, etc

Lead fluoride (7783-46-2)Related Product Information

• Hydrogen fluoride
• Ammonium fluoride
• FLUORIDE STANDARD
• Ammonium hydrogen difluoride
• Aluminum fluoride
• Sodium fluoride
• Sulfur hexafluoride
• Potassium fluoride
• Potassium fluoride dihydrate
• Fluorinated carbon
• Lead(II) sulfide
• Lead zirconate
• Lead(II) chloride
• Caesium fluoride
• Calcium fluoride
• Lithium fluoride
• Barium fluoride
• ALUMINUM FLUORIDE TRIHYDRATE