2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE Basic information
- Product Name:
- 2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
- Synonyms:
-
- 3,4-Ethylenedioxythiophene-2-carbaldehyde
- 3,4-Ethylenedioxothiophene-2-carbaldehyde
- Thieno[3,4-b]-1,4-dioxin-5-carboxaldehyde, 2,3-dihydro-
- 2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
- 2-Formyl-3,4-ethylenedioxythiophene
- 3,4-Ethylenedioxythiophene-2-carboxaldehyde
- 2,3-Dihydrothieno[3,4-b]-1,4-dioxin-5-carbaldehyde
- 2,3-dihydrothieno[3,4-b][1,4]dioxine-5-carbaldehy
- CAS:
- 204905-77-1
- MF:
- C7H6O3S
- MW:
- 170.19
- Mol File:
- 204905-77-1.mol
2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE Chemical Properties
- Melting point:
- 138 °C
- Boiling point:
- 311.2±42.0 °C(Predicted)
- Density
- 1.424±0.06 g/cm3(Predicted)
- storage temp.
- under inert gas (nitrogen or Argon) at 2–8 °C
- Appearance
- Off-white to light brown Solid
- λmax
- 413nm(CH2Cl2)(lit.)
2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE Usage And Synthesis
Chemical Properties
Gray crystal
Synthesis
68-12-2
126213-50-1
204905-77-1
General procedure for the synthesis of 2-(3,4-ethenyldioxythiophene) formaldehyde from N,N-dimethylformamide (DMF) and 3,4-ethenyldioxythiophene (EDOT): to a mixture containing EDOT (15.0 g, 0.1 mol) and DMF (11.0 g, 0.15 mol) was added slowly and dropwise at 0 °C a mixture of 2-(3,4-ethenyldioxythiophene) and 3,4-ethenyldioxythiophene (EDOT) dissolved in anhydrous dichloromethane ( 80 mL) in triphosgene (BTC, 11.9 g, 0.04 mol). The reaction mixture was warmed to 35 °C and stirred continuously for 1 h. Subsequently, it was cooled to room temperature and poured into ice water (250 mL). The pH of the aqueous phase was adjusted to 7-8 with 10% sodium hydroxide solution and the organic phase was separated. The aqueous phase was extracted three times with dichloromethane. All organic phases were combined and dried with anhydrous magnesium sulfate. After removal of the solvent by distillation under reduced pressure, the crude product was recrystallized by 95% ethanol to give a white needle-like crystal product (15.5 g, 86.3% yield). The product was characterized by 1H NMR (400 MHz): δ/ppm: 9.90 (s, 1H), 6.79 (s, 1H), 4.38-4.25 (m, 4H).
References
[1] Advanced Functional Materials, 2011, vol. 21, # 4, p. 634 - 643
[2] Tetrahedron, 1999, vol. 55, # 40, p. 11745 - 11754
[3] Journal of the American Chemical Society, 2004, vol. 126, # 50, p. 16440 - 16450
[4] Physical Chemistry Chemical Physics, 2015, vol. 17, # 8, p. 5776 - 5784
[5] Russian Journal of Applied Chemistry, 2010, vol. 83, # 8, p. 1435 - 1439
2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDESupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 021-021-58432009 400-005-6266
- sales8178@energy-chemical.com
- Tel
- Please Send Email 18652950785
- chemweiao@163.com
- Tel
- 4008-755-333 18080918076
- 800078821@qq.com
- Tel
- 800-810-5118
- cnchemical@thermofisher.com
2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE(204905-77-1)Related Product Information
- 3,3'-DIMETHYL-2,2'-BITHIOPHENYL
- Urethane
- o-Phthalaldehyde
- CALCIUM ALUMINATE
- Methyl tetrahydrophthalic anhydride
- 2,5-Dicarboxylic acid-3,4-ethylenedioxythiophene
- 2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
- 7-BROMO-2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBOXYLIC ACID
- 2,3-DIHYDRO-7-(2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXIN-5-YL)THIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
- 2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXIN-5-CARBONYL CHLORIDE
- 2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5,7-DICARBALDEHYDE
- 7-BROMO-2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
- 2,2',3,3'-TETRAHYDRO-[5,5'-BITHIENO[3,4-B]-1,4-DIOXIN]-7,7'-DICARBOXALDEHYDE
- Thieno[3,4-b]-1,4-dioxin-5,7-dicarboxylic acid, 2,3-dihydro-, diethyl ester
- 7-BROMO-2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBONYL CHLORIDE 90
- 2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE-5-CARBOXYLIC ACID
- 7-VINYL-2,3-DIHYDRO-THIENO[3,4-B][1,4]DIOXINE-5-CARBALDEHYDE
- 7-carbamoyl-2H,3H-thieno[3,4-b][1,4]dioxine-5-carboxylic acid