6,7-dihydropyrrolo[3,4-b]pyridin-5-one
6,7-dihydropyrrolo[3,4-b]pyridin-5-one Basic information
- Product Name:
- 6,7-dihydropyrrolo[3,4-b]pyridin-5-one
- Synonyms:
-
- 6,7-dihydropyrrolo[3,4-b]pyridin-5-one
- 6H,7H-PYRROLO[3,4-B]PYRIDIN-5-ONE
- 5H,6H,7H-Pyrrolo[3,4-b]pyridin-5-one
- 5H-Pyrrolo[3,4-b]pyridin-5-one, 6,7-dihydro-
- 6,7-Dihydro-5H-pyrrolo[3,4-b]pyridin-5-one
- 6,7-Dihydro-5-oxo-5H-pyrrolo[3,4-b]pyridine
- 2-(Aminomethyl)nicotinic acid lactam
- 5,7-Dihydropyrrolo[3,4-b]pyridin-5-one
- CAS:
- 40107-93-5
- MF:
- C7H6N2O
- MW:
- 134.14
- EINECS:
- 251-156-6
- Mol File:
- 40107-93-5.mol
6,7-dihydropyrrolo[3,4-b]pyridin-5-one Chemical Properties
- Melting point:
- 204 °C(Solv: ethanol (64-17-5))
- Boiling point:
- 412.1±34.0 °C(Predicted)
- Density
- 1.286±0.06 g/cm3(Predicted)
- storage temp.
- Sealed in dry,Room Temperature
- pka
- 12.40±0.20(Predicted)
- Appearance
- White to off-white Solid
6,7-dihydropyrrolo[3,4-b]pyridin-5-one Usage And Synthesis
Synthesis
115012-09-4
40107-93-5
General procedure for the synthesis of 6,7-dihydro-5H-pyrrolo[3,4-b]pyridin-5-one from 7-hydroxy-6,7-dihydro-5H-pyrrolo[3,4-b]pyridin-5-one: To a 7-hydroxy-6,7-dihydro-5H-pyrrolo[3,4-b]pyridin-5-one (0.32 g, 2.13 mmol, 1.0 equiv) acetic acid ( 8.6 mL) solution was added to zinc powder (0.56 g, 8.50 mmol, 4.0 equiv). The suspension was heated to reflux for 24 hours. Upon completion of the reaction, the mixture was cooled to room temperature and filtered through a diatomaceous earth pad. The filtrate was concentrated under reduced pressure and the residue was dissolved in dichloromethane (CH2Cl2). Anhydrous calcium chloride (CaCl2) was added to this solution and the insoluble material was removed by filtration. The filtrate was concentrated again under reduced pressure and the residue was purified by column chromatography, first using ethyl acetate (EtOAc) as eluent and then switching to a solvent mixture of ethyl acetate/methanol (95:5, v/v) as eluent. The target fraction was collected, concentrated and recrystallized from ethanol (EtOH) to afford 6,7-dihydro-5H-pyrrolo[3,4-b]pyridin-5-one (0.11 g, 38% yield) as a white solid. Melting point: 206°C (decomposition).1H NMR (300 MHz, DMSO-d6) δ 8.66 (br s, 1H), 8.63 (d, J = 4.9 Hz, 1H), 7.95 (d, J = 7.05 Hz, 1H), 7.38 (dd, J = 7.6/4.9 Hz, 1H), 4.3 (s, 2H); 13C NMR (75 MHz, DMSO-d6) δ 168.7, 164.9, 153.0, 131.9, 126.4, 123.6, 47.1; GC-MS m/z 134 (M)+; IR (KBr) 3352, 3199, 1707, 1607, 1411, 1138 cm?1. Calculated elemental values (C7H6N2O): C, 62.68; H, 4.3 (s, 2H). Calculated elemental values (C7H6N2O): C, 62.68; H, 4.51; N, 20.88. Measured values: C, 62.73; H, 4.50; N, 20.50.
References
[1] Bulletin of the Chemical Society of Japan, 1987, vol. 60, # 11, p. 4178 - 4180
[2] European Journal of Medicinal Chemistry, 2012, vol. 55, p. 58 - 66,9
[3] Patent: CN105541833, 2016, A. Location in patent: Paragraph 0155; 0156; 0157
6,7-dihydropyrrolo[3,4-b]pyridin-5-oneSupplier
- Tel
- 0532-0532-88191853 13061484198
- sales@carelongchem.com
- Tel
- 022-66211289-843 13672102692
- contact@sphinxpharm.com
- Tel
- 021-021-021-67601398-809-809-809 15221380277
- marketing_china@spectrumchemical.com
- Tel
- 027-88041443 13072715837
- sales@hetero-chem.com
- Tel
- 021-61551611 13296011611
- contact@trustwe.com