3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine
3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine Basic information
- Product Name:
- 3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine
- Synonyms:
-
- 3,5-DIETHYL-1,2-DIHYDRO-1-PHENYL-2-PROPYLPYRIDINE
- 1-Phenyl-3,5-diethyl-2-propyl-1,2-dihydropyridine
- 3,5-diethyl-1,2-dihydro-1-phenyl-2-propyl-pyridin
- Pyridine, 3,5-diethyl-1,2-dihydro-1-phenyl-2-propyl-
- 3,5-DIETHYL-1-PHENYL-2-PROPYL-1,2-DIHYDROPYRIDINE
- 3,5-Diethyl-1,2-dihydro-1-phen
- 3,5-Diethyl-1,2-dihydro-1-phenyl-2-n-propylpyridine, tech. 75%
- 3,5-diethyl-1-phenyl-2-propyl-2H-pyridine
- CAS:
- 34562-31-7
- MF:
- C18H25N
- MW:
- 255.4
- EINECS:
- 252-091-3
- Mol File:
- 34562-31-7.mol
3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine Chemical Properties
- Boiling point:
- 125℃/0.5mm
- Density
- 0.97
- vapor pressure
- 0.003Pa at 25℃
- Flash point:
- >148 °C
- refractive index
- 1.5675
- storage temp.
- 2-8°C
- pka
- 0.85±0.70(Predicted)
- Water Solubility
- 53.23μg/L at 25℃
- InChI
- InChI=1S/C18H25N/c1-4-10-18-16(6-3)13-15(5-2)14-19(18)17-11-8-7-9-12-17/h7-9,11-14,18H,4-6,10H2,1-3H3
- InChIKey
- IAAASXBHFUJLHW-UHFFFAOYSA-N
- SMILES
- C1(CCC)N(C2=CC=CC=C2)C=C(CC)C=C1CC
- LogP
- 6.5 at 20℃
- EPA Substance Registry System
- 3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine (34562-31-7)
Safety Information
- Hazard Codes
- Xn
- Risk Statements
- 21/22-36/38
- Safety Statements
- 26
- TSCA
- Yes
3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridine Usage And Synthesis
Uses
3,5-diethyl-1,2-dihydro-1-phenyl-2-propylpyridine (DHP) is the main active ingredient resulting from the condensation reaction of butyraldehyde and aniline. It is a useful research chemical.
Preparation
3,5-diethyl-1,2-dihydro-1-phenyl-2-propylpyridine (DHP) was prepared using methods shown below. A 1000 mL four neck flask was equipped with a mechanical stirrer, a reflux condenser, a thermometer, and an addition funnel. An ice-water bath was used to cool the flask as needed. The flask was charged with 86 g de-ionized water, 9.8 g (0.16 mole) acetic acid, and 216 g (3.0 mol) butyraldehyde. With cooling and stirring, 60 g (0.64 mole) aniline was added over a 35-minute period while maintaining the reaction temperature at 20℃. The reaction mixture was stirred for one hour at less than 25℃. The reaction mixture was then heated to 750C and held for two hours. Finally, the reaction mixture was heated to reflux (~90°C) and was held for five hours. The reaction mixture was cooled and the layers were separated. The top, organic layer was distilled through a 14" packed column under reduced pressure. The fraction taken at a head temperature of 140-1430C and 5 mm Hg pressure weighed 104 grams and was analyzed to contain 73% DHP for an overall yield of 46%.
3,5-Diethyl-1,2-dihydro-1-phenyl-2-propylpyridineSupplier
- Tel
- 0531-18763987518 18763987518
- levi@lihengpharm.com
- Tel
- 400-6106006
- saleschina@alfa-asia.com
- Tel
- 025-83697070
- info@chemlin.com.cn
- Tel
- 022-60116533 13207668525
- saleskc@scipharmacn.com
- Tel
- 13901585132
- 799750417@qq.com