sealing film Chemical Properties

color 

white

sealing film Usage And Synthesis

Uses

Gas-Permeable Sealing Membrane - A Fresh Breath for Cell Growth Technology!
Breathe-Easier sealing membrane offers an exceedingly high rate of gas exchange to allow maximum cell growth rate. When adhered to a microtiter plate, the 5.5 mil thick membrane insures a uniform rate of gas exchange for all wells, while sustaining a contaminant-free environment within the well. Conventional microtiter lids disrupt uniform gas exchange from well to well by favoring those wells along the perimeter of the plate.
With Breathe-Easier, sterility is achieved using gamma irradiation. Unlike ethylene oxide sterilization, this sterilization method assures that no cytotoxins are introduced into the membranes. Breathe Easier will not inhibit fibroblast cell growth or division, and the membrane is FDA approved for blood and cell contact in wond healing. The acrylic adhesive exhibits excellent bonding characteristics with all different plastic microtiter plates.

General Description

Excel Scientific′s unique SealMate^? system provides a convenient new method for sealing standard-format microplates with adhesive films. The system includes a molded polypropylene dispenser with a hinged "clamshell" design and sealing films supplied in a novel sheeted-roll configuration.

The SealMate^? dispenser provides a protective enclosure for films on the roll prior to dispensing. It can be opened, permitting insertion of a new roll, then closed and latched securely by means of clasps at each side of its film-dispensing "bill". ndividual films on the roll are delineated by non-adhesive color bands that serve as end-tabs for positioning the films on the microplates. The bands also act as markers to show when the end of one film has been reached so that the next film is not pulled prematurely from the dispenser. Each non-adhesive band contains two perforations, the first of which, bounded by a small indent at the edges, tears easily to separate the sheet being dispensed from the next sheet on the roll. The second perforation permits the end-tab to be removed from the plate once the film has been applied. Several unique features contribute to ease and usability of the SealMate^? dispenser. A compression-brake mechanism prevents the roll from turning as the dispensed sheet is separated from the roll. The smooth lower surface can be swept across the film once applied to the plate to assure secure sealing around all wells. Thumb and forefinger notches above and below the film at the edge of the dispensing bill provide access to the non-adhesive band to facilitate pulling the next film from the dispenser. A prop on the lower surface prevents the bill from contacting the supporting surface when the dispenser is not in use. Alternatively, the dispenser can stand on one of the hubs at the roll ends during storage. The dispenser, thus parked, provides protection and keeps unused films handy for sealing subsequent plates without the need for opening small boxes or pulling individual films from plastic bags. The SealMate^? system reduces laboratory waste because the film is rolled on itself with no extra paper or plastic liner to be discarded before sealing the plate.

SealPlate^? Films

SealPlate^? 38 μm thick polyester films minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal, not just a cover. They are recommended for ELISA tests, general incubation, and short-term storage. Temperature range: -40 °C to +120 °C. SealPlate^? films are non-pierceable. Each SealPlate^? roll contains films to cover 100 microplates.
Color code: green

AeraSeal^? Films

AeraSeal^? 140 μm thick hydrophobic porous films with medical-grade adhesive provide non-cytotoxic breathable closures for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cellor bacterial growth. AeraSeal^? films allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near plate edges. Temperature range: -20 °C to +80 °C. AeraSeal films are easily pierceable with pipets or pipet tips for sample recovery. Each AeraSeal^? roll contains films to cover 50 culture plates.
Color code: red

sealing film()Related Product Information

• Sealing Film For Real-time PCR
• Sealing Film, Sterile