MERCURIC CYANIDE Chemical Properties

Melting point:

46.85°C

Density 

3.996 g/mL at 25 °C(lit.)

storage temp. 

Poison room

solubility 

Methanol (Slightly), THF (Soluble)

form 

Fine Crystalline Powder

color 

White

Specific Gravity

3.996

Water Solubility 

g/100g solution H2O: 6.31 (0°C), 10.06±0.06 (25°C), 35.05 (101.1°C) [KRU93]; 1g dissolves in 13mL alcohol, 4mL methanol; slightly soluble ether; slowly soluble glycerol [MER06]

Merck 

13,5903

BRN 

4652800

Exposure limits

TLV-TWA 0.1 mg Hg/m³ (skin) (ACGIH).

Stability:

Acid Sensitive, Light Sensitive

CAS DataBase Reference

592-04-1(CAS DataBase Reference)

EPA Substance Registry System

Mercuric cyanide (592-04-1)

Safety Information

Hazard Codes 

T+,N

Risk Statements 

26/27/28-32-50/53

Safety Statements 

7-28-29-45-60-61

RIDADR 

UN 1636 6.1/PG 2

WGK Germany 

3

RTECS 

OW1515000

F 

8

HazardClass 

6.1(a)

PackingGroup 

II

HS Code 

28521000

Hazardous Substances Data

592-04-1(Hazardous Substances Data)

MSDS

• Language:English Provider:SigmaAldrich

MERCURIC CYANIDE Usage And Synthesis

Description

Mercuric cyanide is an odorless, white crystalline solid; turns gray to dark brown when exposed to light. Molecular weight= 252.63; Decomposes at 319℃. Hazard Identification (based on NFPA-704 M Rating System): Health 3, Flammability 0, Reactivity 0. Soluble in water.

Chemical Properties

Mercuric cyanide is an odorless, white crystalline solid; turns gray to dark brown when exposed to light

Chemical Properties

WHITE FINE CRYSTALLINE POWDER

Uses

Medicine (antiseptic), germicidal soaps, manufacturing cyanogen gas, photography.

Uses

Mercuric cyanide finds veterinary application as a topical antiseptic for cats and other animals.

Definition

ChEBI: Mercury dicyanide is a mercury coordination entity.

Preparation

One part of HgO is digested for a few hours on a water bath with one part of Prussian blue and 10 parts of H2O. The mercuric cyanide crystals separate on evaporation of the solution.

General Description

Odorless tetragonal crystals or white powder. Toxic by inhalation (dust, and the hydrogen cyanide from decomposition) and by ingestion. Toxic oxides of nitrogen are produced in fires. It is used in medicine, germicidal soaps, photography, and in making cyanogen gas.

Air & Water Reactions

Soluble in water. Gradually decomposed by water to give off hydrogen cyanide, a flammable poison gas.

Reactivity Profile

MERCURIC CYANIDE is rapidly decomposed by acids to give off hydrogen cyanide, a flammable poison gas. Decomposed in the light. May tend to explosive instability. Capable of violent reaction with oxidizing agents. Fusion with metal chlorates, perchlorates, nitrates or nitrites can cause a violent explosion [Bretherick 1979. p. 101].

Hazard

Toxic by ingestion, inhalation, and skin absorption.

Health Hazard

Symptoms of both cyanide and mercury intoxication can occur. Acute poisoning has resulted from inhaling dust concentrations of 1.2-8.5 mg/m 3 of air; symptoms include tightness and pain in chest, coughing, and difficul ty in breathing; cyanide poisoning can cause anxiety, confusion, dizziness, and shortness of breath, with possible unconsciousness, convulsions, and paralysis; breath may smell like bitter almonds. Ingestion causes necrosis, pain, vomiting, an d severe purging, plus the above symptoms. Contact with eyes causes ulceration of conjunctiva and cornea. Contact with skin causes irritation and possible dermatitis; systemic poisoning can occur by absorption through skin.

Health Hazard

Mercuric cyanide is a highly poisonous compound. Its components, mercury(II) and the cyanide ions, are both highly toxic. Its toxicity, however, is lower than that of sodium and potassium cyanides.
Acute toxic symptoms from oral intake of this compound in humans are hypermotility, diarrhea, nausea or vomiting, and injury to kidney and bladder. Toxic symptoms may be manifested in humans from consuming 15–20 g of this compound. Lower doses may produce somnolence. An intraperitoneal dosage of 7.5 mg/kg was fatal to rats.
LD50 value, oral (mice): 7.5 mg/kg.

Fire Hazard

Special Hazards of Combustion Products: Fumes from fire may contain toxic mercury and hydrogen cyanide.

Safety Profile

Poison by ingestion, subcutaneous, intravenous, and intraperitoneal routes. Human systemic effects by ingestion: nausea or vomiting, hypermotility, dlarrhea, kidney changes, somnolence. Hydrolyzes to toxic fumes. A frictionand impact-sensitive explosive. It may initiate detonation of liquid hydrogen cyanide. Incompatible with fluorine, magnesium, sodium nitrite. When heated to decomposition it emits very toxic fumes of Hg, NOx, and CN-. See also CYANIDE and MERCURY COMPOUNDS.

Potential Exposure

Mercuric cyanide is used in medicine, germicidal soaps, photography and in making cyanogen gas

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. Antidotes and special procedures for medical personnel: The drug NAP (n-acetyl penicillamine) has been used to treat mercury poisoning, with mixed success. Note to physician: For severe poisoning BAL [British AntiLewisite, dimercaprol, dithiopropanol (C3H8OS2)] has been used to treat toxic symptoms of certain heavy metals poisoning including mercury. Although BAL is reported to have a large margin of safety, caution must be exercised, because toxic effects may be caused by excessive dosage. Most can be prevented by premedication with 1-ephedrine sulfate (CAS: 134-72-5).

storage

Color Code—Blue: Health Hazard/Poison: Store in a secure poison location. Prior to working with this chemical you should be trained on its proper handling and storage. Mercuric cyanide must be stored to avoid contact with fluorine, magnesium, and sodium nitrite, since violent reactions occur. Mercuric cyanide should not contact acid or heat because it will release flammable hydrogen cyanide gas. Store in tightly closed containers in a cool, well-ventilated area away from light. Protect containers from physical damage.

Shipping

UN1636 Mercuric cyanide, Hazard Class: 6.1; Labels: 6.1-Poisonous materials

Purification Methods

Crystallise it from water. The solubility in H2O is 8% at ~20o and 33% at ~100o; in EtOH it is 8% at ~20o and in MeOH it is 25% at ~20o. [Blitz Z Anorg Allgem Chem 170 161 1928.] POISONOUS.

Incompatibilities

Violent reaction with fluorine, magnesium, sodium nitrite, acids. Heating or contact with acid releases toxic mercury and flammable hydrogen cyanide gas. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides

Waste Disposal

Return to supplier for mercury recovery and deactivation.

MERCURIC CYANIDE(592-04-1)Related Product Information

• MERCUROUS CHLORIDE
• MERCURY(II) TRIFLUOROMETHANESULFONATE
• MERCURY(II) IODIDE
• MERCURY(II) PERCHLORATE HYDRATE
• METHYLMERCURY(II) HYDROXIDE
• Mercury chloride
• MERCURY(II) FLUORIDE
• MERCURY(I) FLUORIDE
• Mercury nitrate monohydrate
• Mercury
• MERCURIC THIOCYANATE
• POTASSIUM MERCURIC CYANIDE
• MERCURIC CYANIDE
• MERCURIC OXYCYANIDE
• DIMETHYLMERCURY
• Cyanomethylmercury
• ZINC MERCURIC CYANIDE