1-Chloro-2,5-difluorobenzene
1-Chloro-2,5-difluorobenzene Basic information
- Product Name:
- 1-Chloro-2,5-difluorobenzene
- Synonyms:
-
- Benzene,2-chloro-1,4-difluoro-
- 2-CHLORO-1,4-DIFLUOROBENZENE
- 2,5-DIFLUOROCHLOROBENZENE
- 1-CHLORO-2,5-DIFLUOROBENZENE
- 1-CHLORO-2 5-DIFLUOROBENZENE 98%
- 1-Chloro-2,5-difluorobenzene, 98% [2-Chloro-1,4-difluorobenzene]
- 1-Chloro-2,5-difluorobenzene98%
- 1-Chloro-2,5-difluor
- CAS:
- 2367-91-1
- MF:
- C6H3ClF2
- MW:
- 148.54
- EINECS:
- 624-315-3
- Product Categories:
-
- Aryl
- Halogenated Hydrocarbons
- C6
- Mol File:
- 2367-91-1.mol
1-Chloro-2,5-difluorobenzene Chemical Properties
- Melting point:
- 24.6 °C
- Boiling point:
- 126-128 °C(lit.)
- Density
- 1.352 g/mL at 25 °C(lit.)
- refractive index
- n20/D 1.478(lit.)
- Flash point:
- 68 °F
- storage temp.
- 2-8°C
- form
- liquid
- color
- Clear, faint yellow
- BRN
- 2081082
- CAS DataBase Reference
- 2367-91-1(CAS DataBase Reference)
- NIST Chemistry Reference
- 1-Chloro-2,5-difluorobenzene(2367-91-1)
Safety Information
- Hazard Codes
- Xn,F,Xi
- Risk Statements
- 10-20/21/22-36/37-36/37/38-11
- Safety Statements
- 16-26-36-37/39
- RIDADR
- UN 1993 3/PG 2
- WGK Germany
- 3
- Hazard Note
- Flammable
- HazardClass
- 3
- PackingGroup
- III
- HS Code
- 2903998090
MSDS
- Language:English Provider:ACROS
- Language:English Provider:SigmaAldrich
- Language:English Provider:ALFA
1-Chloro-2,5-difluorobenzene Usage And Synthesis
Chemical Properties
Colorless liquid
Synthesis
108-90-7
348-51-6
352-33-0
625-98-9
1435-44-5
696-02-6
2367-91-1
GENERAL STEPS: In a FEP or PFA reactor fitted with a PTFE-lined magnetic stirring bar and connected to a gas scrubber bottle, substituted benzene (0.95-1.10 mmol), 1,1,1,3,3-pentafluorobutane (2 ml per ml of C6H5R), and BF3-Et2O (1.3-1.5 mmol per mmol C6H5R) were added. The mixture was stirred at 0-5 °C (ice bath) for 10-15 min, followed by batchwise addition of XeF2 (1.2-1.3 mmol per mmol C6H5R). After each addition, the mixture was stirred at 22-25 °C for 3-5 min and cooled to 0-5 °C again. After the addition was completed, the dark colored solution was continued to be stirred at 22-25°C for 15-30 minutes. At the end of the reaction, the reaction was quenched by the addition of 10% aqueous KHCO3, the upper organic layer was separated and filtered through a short column packed with silica gel (40-60 μm). The organic layer was dried with magnesium sulfate and analyzed by 19F NMR and GC/MS. The major products are listed in the table and the others are as follows (GC/MS data).
References
[1] Russian Journal of Organic Chemistry, 2016, vol. 52, # 10, p. 1400 - 1407
[2] Zh. Org. Khim., 2016, vol. 52, # 10, p. 1412 - 1419,8
1-Chloro-2,5-difluorobenzeneSupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 400-6106006
- saleschina@alfa-asia.com
- Tel
- 0757-86329057 18934348241
- sales4.gd@hwrkchemical.com
- Tel
- 021-021-58432009 400-005-6266
- sales8178@energy-chemical.com
- Tel
- 86-027-67849912
- sales@chemwish.com
1-Chloro-2,5-difluorobenzene(2367-91-1)Related Product Information
- 1,3-Difluorobenzene
- 1,3-Dichlorobenzene
- Transfluthrin
- 2,4-Dichlorobenzyl chloride
- Permethrin
- Florfenicol
- Flumethrin
- 4-Fluorobenzaldehyde
- 1,2-Difluorobenzene
- 1,2-Dichlorobenzene
- Difluorochloromethane
- 4-CHLORO-2,5-DIFLUOROBENZOIC ACID
- Chloropentafluorobenzene
- 1-CHLORO-2,3,5,6-TETRAFLUOROBENZENE
- FENFLURAMINE
- p-Dichlorobenzene
- 2-CHLORO-3,6-DIFLUOROBENZOIC ACID
- 1,3-DICHLOROTETRAFLUOROBENZENE