Chloroacetaldehyde Chemical Properties

Melting point:

-28--23°C

Boiling point:

80-100 °C(lit.)

Density 

1.236 g/mL at 25 °C

vapor pressure 

100 at 20 °C (NIOSH, 1997)

refractive index 

n20/D 1.407

Flash point:

128 °F

solubility 

Soluble in ether (Weast, 1986), acetone, and methanol (Hawley, 1981)

form 

Colorless liquid

Water Solubility 

soluble in acetone, methanol. Fully miscible in water.

Sensitive 

Air Sensitive

Merck 

2109

BRN 

1071226

Exposure limits

Ceiling 3 mg/m³ (1 ppm) (ACGIH); IDLH.

LogP

0.62 at 25℃ and pH5.8

CAS DataBase Reference

107-20-0(CAS DataBase Reference)

NIST Chemistry Reference

Acetaldehyde, chloro-(107-20-0)

EPA Substance Registry System

Chloroacetaldehyde (107-20-0)

Safety Information

Hazard Codes 

T+,N

Risk Statements 

24/25-26-34-40-50-35

Safety Statements 

26-28-36/37/39-45-61

RIDADR 

UN 2232 6.1/PG 1

OEL

Ceiling: 1 ppm (3 mg/m3)

WGK Germany 

-

RTECS 

AB2450000

TSCA 

Yes

HazardClass 

6.1(a)

PackingGroup 

I

HS Code 

29130000

Hazardous Substances Data

107-20-0(Hazardous Substances Data)

Toxicity

Acute oral LD₅₀ for rats 75 mg/kg, mice 69 mg/kg (quoted, RTECS, 1985).

IDLA

45 ppm

MSDS

• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Chloroacetaldehyde Usage And Synthesis

Description

oroacetaldehyde is a combustible, color?less liquid with a very sharp, irritating odor. Molecularweight=78.50; Specific gravity (H2O:1)=1.19 (40%solution); Boiling point=85 100℃; Freezing/Meltingpoint=16℃(40% solution); Vapor pressure 5100 mmHg at 20℃; Flash point=87.7℃(40%626 Chloroacetaldehydesolutions). Hazard Identification (based on NFPA 704 MRating System): Health 3, Flammability 2, Reactivity 0(able to polymerize on standing). Soluble in water.

Chemical Properties

Chloroacetaldehyde is a combustible, colorless liquid with a very sharp, irritating odor.

Physical properties

Clear, colorless liquid with an irritating, acrid odor

Uses

In the manufacture of 2- aminothiazole; to facilitate bark removal from tree trunks; formed during the chlorination of drinking water; a metabolite of vinyl chloride

Uses

Chloroacetaldehyde is used in the productionof 2-aminothiazole.

Definition

ChEBI: Chloroacetaldehyde is acetaldehyde substituted at C-2 by chlorine. It derives from an acetaldehyde.

General Description

A clear colorless liquid with a pungent odor. Flash point about 190°F. Corrosive to skin and mucous membranes. Chloroacetaldehyde is very toxic by inhalation.

Air & Water Reactions

Soluble in water. Forms an insoluble hemihydrate at greater than 50% concentration.

Reactivity Profile

Chloroacetaldehyde polymerizes on standing. At greater than 50% concentration in water, Chloroacetaldehyde forms an insoluble hemihydrate. Sensitive to heat. Reacts with oxidizing agents. Incompatible with acids and water . Burns to give poisonous and irritating gases.

Hazard

Corrosive to skin and mucous membranes. TLV: ceiling 1 ppm.

Health Hazard

Chloroacetaldehyde is a highly toxic andcorrosive compound that can injure the eyes,skin, and respiratory system. Exposure toits vapor at high concentrations can producesevere irritation and impair vision. At lowconcentrations, the vapor can cause irritationand sore eyelids. Brief contact with 40%aqueous solution can result in skin burn anddestruction of tissues. A 0.5% dilute solutioncan still be irritating on skin.
Inhalation of its vapor at the 5-ppm levelcan irritate the eyes, nose, and throat. Ingestionmay result in pulmonary edema. Swallowinga concentrated solution may be fatal.The acute toxicity data are as follows:
LD50 value, intraperitoneal (rats): 2 mg/kg
LD50 value, oral (rats): 23 mg/kg
LD50 value, skin (rabbits): 67 mg/kg
This compound is a mutagen, testing positivein the Ames test.

Fire Hazard

Combustible; flash point (closed cup) 87.8°C (190°F); flash point of 50% aqueous solution 53°C (128°F) (at this concentration it may form insoluble hemihydrate); it forms an explosive mixture with air. Reactions with strong acids and oxidizers are exothermic.

Safety Profile

Suspected carcinogen. Poison by ingestion, skin contact, and intraperitoneal routes. Mutation data reported. Combustible when exposed to heat or flame. Reacts with oxidizing materials. To fight fire, use water, foam, CO2, dry chemical. When heated to decomposition it emits toxic fumes of Cl-. See also ALDEHYDES and CHLORIDES.

Potential Exposure

Chloroacetaldehyde is used as a fungicide; as an intermediate in 2-aminothiazole manufacture; and in bark removal from tree trunks.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least30 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24-48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray.

Carcinogenicity

Chloroacetaldehyde has been reported to be an inhibitor of DNA synthesis and to form DNA adducts; it is mutagenic in Salmonella typhimurium and in Chinese hamster cells.
Limited in vivo genotoxicity studies with chloroacetaldehyde were negative.

Environmental Fate

Chemical/Physical. Polymerizes on standing (Windholz et al., 1983).

storage

Polymerizable upon standing. Color Code—Blue:Health Hazard/Poison: Store in a secure poison location.Prior to working with chloroacetaldehyde you should betrained on its proper handling and storage. Store in tightlyclosed containers in a cool, dry, well-ventilated area. Metalcontainers involving the transfer of this chemical should begrounded and bonded. Where possible, automatically pumpliquid from drums or other storage containers to processcontainers. Drums must be equipped with self-closingvalves, pressure vacuum bungs, and flame arresters. Useonly nonsparking tools and equipment, especially whenopening and closing containers of this chemical. Sources ofignition, such as smoking and open flames, are prohibitedwhere this chemical is used, handled, or stored in a mannerthat could create a potential fire or explosion hazard.

Shipping

UN22322-Chloroethanal, Hazard class: 6.1; Labels: 6.1-Poison Inhalation Hazard, Inhalation Hazard Zone B.

Incompatibilities

Heat and water sensitive; concentrations of .50% form insoluble hemihydrate material on contact with water. Reacts with oxidizers, acids. On heating,chloroacetaldehyde releases chlorine fumes. Polymerizable upon standing

Waste Disposal

Incineration, preferably after mixing with another combustible fuel; care must be exercised to assure complete combustion to prevent the formation of phosgene; an acid scrubber is necessary to remove the halo acids produced.

Chloroacetaldehyde(107-20-0)Related Product Information

• Metaldehyde
• Metaldehyde
• Acetaldehyde
• Paraldehyde
• Acetaldoxime
• ALDEHYDE DEHYDROGENASE
• Phenylacetaldehyde
• Glyoxylic acid
• Chloral
• Chloroacetaldehyde
• Methyl trichloroacetate
• Chloroacetyl chloride
• Dichloroacetic acid methyl ester
• 1,3-DICHLOROTETRAFLUOROACETONE
• N,N'-OCTAMETHYLENEBIS(DICHLOROACETAMIDE)
• CHLORODIFLUOROACETIC ANHYDRIDE
• 2-CHLORO-2,2-DIPHENYLACETYL CHLORIDE
• Hexachloroacetone