Basic information Safety Supplier Related

Methyl 4-fluoro-3-methylbenzoate

Basic information Safety Supplier Related

Methyl 4-fluoro-3-methylbenzoate Basic information

Product Name:
Methyl 4-fluoro-3-methylbenzoate
Synonyms:
  • Methyl 4-fluoro-3-methylbenzoate
  • 3-Methyl-4-Fluoro benzoic acidmethyl ester
  • 3-Methyl-4-fluoroMethyl benzoate
  • Methyl 4-fluoro-m-toluate, 2-Fluoro-5-(methoxycarbonyl)toluene
  • 4-fluoro-2,3-dimethylbenzoate
  • Benzoic acid, 4-fluoro-3-methyl-, methyl ester
  • methyl 3-Methyl-4-fluorobenzoate
CAS:
180636-50-4
MF:
C9H9FO2
MW:
168.16
Product Categories:
  • blocks
  • Carboxes
  • FluoroCompounds
Mol File:
180636-50-4.mol
More
Less

Methyl 4-fluoro-3-methylbenzoate Chemical Properties

Boiling point:
219.2±20.0℃ (760 Torr)
Density 
1.137±0.06 g/cm3 (20 ºC 760 Torr)
Flash point:
84.1±16.7℃
storage temp. 
Sealed in dry,Room Temperature
Appearance
Colorless to off-white Solid-liquid mixture
More
Less

Safety Information

Hazard Codes 
Xi
HS Code 
2916399090
More
Less

Methyl 4-fluoro-3-methylbenzoate Usage And Synthesis

Synthesis

148547-19-7

180636-50-4

General procedure for the synthesis of methyl 4-fluoro-3-methylbenzoate from methyl 4-bromo-3-methylbenzoate: methyl 4-bromo-3-methylbenzoate (27.5 mg, 0.12 mmol), BrettPhos (6.4 mg, 0.012 mmol, 10 mol%), (COD)Pd(CH2TMS)2 (2.3 mg. 0.006 mmol, 5 mol%), AgF (22.8 mg, 0.18 mmol, 1.5 eq.), and toluene (2 mL) were added sequentially to an oven-dried, resealable screw-cap test tube equipped with a stir bar. After sealing the test tubes, they were removed from the glove box, wrapped in aluminum foil, and placed in a preheated 130°C oil bath with sufficient stirring for 18 hours of reaction. Upon completion of the reaction, the test tubes were removed from the oil bath and cooled to room temperature. P-fluorotoluene (6.5 μL, 0.06 mmol, 0.5 eq.) and dodecane (27.3 μL, 0.12 mmol, 1 eq.) were added as internal standards. The reaction mixture was filtered through a glass filter and Celite plug to remove solid impurities. Subsequently, the clarified yellow solution was analyzed by 19F NMR (282 MHz) to determine the yield, and the conversion and reduction products were analyzed by GC. Yield was determined by comparing the 19F NMR integrals of p-fluorotoluene (-118 ppm) and methyl 4-fluoro-3-methylbenzoate (-106 ppm, 0.100 mmol, 83% yield).GC/MS analysis confirmed that the only compound in solution was methyl 4-fluoro-3-methylbenzoate.

References

[1] Patent: US2011/15401, 2011, A1. Location in patent: Page/Page column 17

Methyl 4-fluoro-3-methylbenzoateSupplier

J & K SCIENTIFIC LTD.
Tel
18210857532; 18210857532
Email
jkinfo@jkchemical.com
Energy Chemical
Tel
021-021-58432009 400-005-6266
Email
sales8178@energy-chemical.com
Shijiazhuang Sdyano Fine Chemical Co., Ltd.
Tel
0311-89250318 031166536426
Email
master@sjzsdyn.com
Wuhan Chemwish Technology Co., Ltd
Tel
86-027-67849912
Email
sales@chemwish.com
Capot Chemical Co., Ltd
Tel
+86 (0) 571 85 58 67 18