Pentachlorophenol Chemical Properties

Melting point:

165-180 °C(lit.)

Boiling point:

310 °C(lit.)

Density 

1.978 g/mL at 25 °C(lit.)

vapor density 

9.2 (vs air)

vapor pressure 

40 mm Hg ( 211.2 °C)

refractive index 

1.6310 (estimate)

Flash point:

11 °C

storage temp. 

0-6°C

solubility 

Chloroform (Slightly), Ethyl Acetate (Sparingly)

pka

4.80 (Blackman et al., 1955)
5.3 (Eder and Weber, 1980)

Water Solubility 

80 mg l^-1(30 °C)

form 

Liquid

Specific Gravity

1.979

Merck 

7109

BRN 

1285380

Henry's Law Constant

21 (quoted, Petrasek et al., 1983)

Exposure limits

NIOSH REL: IDLH 0.5 mg/m3, IDLH 2.5 mg/m3; OSHA PEL: TWA 0.5 mg/m3; ACGIH TLV: TWA 0.5 mg/m3

Stability:

Stable. Incompatible with strong oxidizing agents.

CAS DataBase Reference

87-86-5(CAS DataBase Reference)

IARC

1 (Vol. 53, 71, 117) 2019

EPA Substance Registry System

Pentachlorophenol (87-86-5)

Safety Information

Hazard Codes 

T+,N,T,F,Xn

Risk Statements 

24/25-26-36/37/38-40-50/53-39/23/24/25-23/24/25-11-52/53-51/53

Safety Statements 

22-36/37-45-52-60-61-16-7

RIDADR 

UN 3155 6.1/PG 2

OEB

C

OEL

TWA: 0.5 mg/m3 [skin]

WGK Germany 

3

RTECS 

SM6300000

HazardClass 

6.1(a)

PackingGroup 

II

HS Code 

29081100

Hazardous Substances Data

87-86-5(Hazardous Substances Data)

Toxicity

Pentachlorophenol (PCP) is very toxic to plants and are used as preharvest defoliants and general herbicides. Their use as herbicides is currently restricted to nonagricultural uses along drainage ditches, driveways, and fencerows.
Commercial (technical) grades of PCP commonly contain manufacturing by- products, such as dioxin (HxCDD), which can be more toxic than the PCP itself. Another contaminant in PCP is HCB (Hexachlorobenzene). The use of PCP is being phased out because of the discovery of these highly toxic contaminants (9). PCP is a Restricted Use Pesticide (RUP). Restricted Use Pesticides may be purchased and used only by certified applicators.
In 1988 the EPA announced further restrictions on the use of PCP as in the pulp and paper industry where it is used in paper coatings, sizing, adhesives and in inks. Registration for use in cooling towers and for certain oil well operations was also cancelled. The 1988 regulations also required compliance with dioxin (HxCDD) concentration limits in the final product.

IDLA

2.5 mg/m3

MSDS

• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Pentachlorophenol Usage And Synthesis

Chemical Properties

Pentachlorophenol is also called pe-nta, Dowicide 49-162, PCP or Santophen20. This product is white needle crystal. It is difficult to dissolve in water and soluble in most organic solvents, such as ethanol, acetone, ether, but not in carbon tetrachloride and paraffin hydrocarbon,acidic. Without the presence of moisture, it is not corrosive to most metals and its dissociation constant value is 1.2 x 10-5 at 25℃. Incompatible with strong oxidizing agents. With high stability, it did not catch on fire in the air when the test temperature reached 200℃. 
Pentachlorophenol is obtained directly by chlorination using phenol as a raw material, AlCl3 and FeCl3 as the catalyst with the temperature varying from 100℃ to 180℃.It is also obtained with sodium pentachlorophenol, which prepared with 666 invalid body as raw material through high pressure hydrolysis, by acidification. It is mainly used as herbicide in paddy fields, antimicrobial preservative and fungicide for textiles, leather, paper and wood. The general dosage is 0.1% ~ 0.5%. It has the function to eliminate the fungi, termites, Oncomelania hupensis and so on. It can be used in industrial circulating cooling water to control its algae, fungi, bacteria and industrial clay. Because of its high toxicity (oral in rats LD50 146～175mg/kg, fish poison 2×10-7～ 6×10-7) and easy water environmental pollution, it has been used less in water treatment in recent years.

Description

Pentachlorophenol is a restricted use pesticide and is used industrially as a wood preservative for utility poles, railroad ties, and wharf pilings. Pentachlorophenol was widely used as wood preservative until 1987 when its use was restricted to certified applicators. Pentachlorophenol is considered a probable human carcinogen and exposure to high levels can also have other health risks.
Pentachlorophenol is a synthetic substance, made from other chemicals, and does not occur naturally in the environment. It is made by only one company in the United States. At one time, it was one of the most widely used biocides in the United States. Since 1984, the purchase and use of pentachlorophenol has been restricted to certified applicators. It is no longer available to the general public. Application of pentachlorophenol in the home as an herbicide and pesticide accounted for only 3% of its consumption in the 1970s. Before use restrictions, pentachlorophenol was widely used as a wood preservative. It is now used industrially as a wood preservative for power line poles, cross arms, fence posts, and the like. Pure pentachlorophenol exists as colorless crystals. It has a very sharp characteristic phenolic smell when hot but very little odor at room temperature. Most people can begin to smell pentachlorophenol in water at less than 12 parts pentachlorophenol per million parts of water (ppm). Impure pentachlorophenol (the form usually found at hazardous waste sites) is dark gray to brown and exists as dust, beads, or flakes. Pentachlorophenol can be found in two forms: pentachlorophenol itself or as the sodium salt of pentachlorophenol. The sodium salt dissolves easily in water, but pentachlorophenol does not. These two forms have some different physical properties, but are expected to have similar toxic effects. Humans are generally exposed to technical-grade pentachlorophenol, which usually contains such toxic impurities as polychlorinated dibenzo- p-dioxins and dibenzofurans.

Chemical Properties

Pentachlorophenol is a colorless to white, crystalline solid. It has a benzene-like odor; pungent when hot. The Odor Threshold in water is 1600 μg/L and the taste threshold in water is 30 μg/L.

Physical properties

White flakes or needles with a phenolic odor. At 40 °C, the average odor threshold concentration and the lowest concentration at which an odor was detected were 23 and 9.3 μg/L, respectively. At 25 °C, the lowest concentration at which a taste was detected was 8 μg/L (Young et al., 1996).

Uses

Pentachlorophenol is used to control termites and, as the laurate ester, wood boring insects. The ester and the sodium salt are used to protect wood from fungal rot and as general herbicides and defoliants. The sodium salt is also used as a general disinfectant.

Uses

Pentachlorophenol (PCP) is used for termite control, asa defoliant, and in the preservation of wood and wood products. It is an indoor air pollutant. It has been detected in timbers in the ppm range, causing contamination of air, surfaces, and materials in the homes. Its concentrations in blood samples have been reported in the range of sub-ppb to 110 μ/kg (Ruh et al. 1984). It has been detected in flue gas at 760–870°C (1400–1598°F) exit temperature from an incinerator at a concentration of 1.033 mg/m³ (Guinivan et al. 1985). The incinerator burned pentachlorophenol-treated wooden ammunition boxes and there was no afterburning. Methyl ethers of pentachlorophenol—pentachloroanisole and tetrachlorohydroquinone dimethyl ether —formed from microbial methylation of pentachlorophenol have been identified in the pg/m³ range in marine air samples from both the northern and southern hemispheres (Atlas et al. 1986)..

Uses

Pentachlorophenol (PCP) is an odourless, white or light brown powder or crystal in appearance. It is used as herbicide and fungicide. Pentachlorophenol is incompatible with strong oxidising agents. Pentachlorophenol has a very sharp characteristic phenolic smell when hot but very little odour at room temperature. Pentachlorophenol is a synthetic substance made from other chemicals and does not occur naturally in the environment. Initially pentachlorophenol was widely used as a wood preservative. It is now used industrially as a wood preservative for power line poles, cross arms, fence post, etc.
Used as insecticide for terminate control; pre-harvest defoliant; general herbicide. Antimicrobial preservative and fungicide for wood, wood products, starches, textiles, paints, adhesives, leather, pulp, paper, industrial waste systems, building materials. Surface disinfectant.

Uses

.Insecticide; fungicide; herbicide.

Definition

ChEBI: A chlorophenol that is phenol substituted by 5 chloro groups.

Production Methods

Pentachlorophenol can be produced by the chlorination of phenol in the presence of AlCl3, or by hydrolysis of hexachlorobenzene with NaOH in methanol.

General Description

A white crystalline solid. Slightly soluble in water. Noncombustible. Toxic by inhalation, ingestion, and skin absorption. Used as a fungicide and as a wood preservative.

Air & Water Reactions

Slightly soluble in water.

Reactivity Profile

Pentachlorophenol may react with strong oxidizing agents. Incompatible with strong bases, acid chlorides and acid anhydrides. Forms salts with alkaline metals. Solutions in oil cause natural rubber to deteriorate, but synthetic rubber may be used in equipment and for protective clothing .

Health Hazard

Dust or vapor irritates skin and mucous membranes, causing coughing and sneezing. Ingestion causes loss of appetite, respiratory difficulties, anesthesia, sweating, coma. Overexposure can cause death.

Health Hazard

Pentachlorophenol is a severe acute toxicant by ingestion and dermal penetration. The compound and its alkali salts can produce local and systemic effects. The symptoms of acute toxicity are headache, dizziness, sweating, nausea, vomiting, dyspnea, chest pain, weakness, fever, collapse, convulsions, and heart failure. Inhalation of its dusts or vapors can cause irritation of the eyes, nose, and throat, and coughing and sneezing. There is no evidence of chronic poisoning or any cumulative effects.
LD50 value, oral (mice): 117 mg/kg
LD50 value, skin (rats): 96 mg/kg Subacute toxicity studies on rats orally administered pentachlorophenol at a dose of 0.2 mmol/kg/day for 28 days showed no effect on growth. However, this treatment induced cell alterations in liver and changes in relative liver weights (Renner et al. 1987).Fathead minnows exposed to 8–130 g/L of pentachlorophenol for 90 days experienced no adverse effects on their survival, growth, or bone development (Hamilton et al. 1986). Fathead minnows exposed to 8–130 g/L of pentachlorophenol for 90 days experienced no adverse effects on their survival, growth, or bone development (Hamilton et al. 1986). McKim and associates (1986) have conducted aquatic toxicokinetic studies using 14C-labeled pentachlorophenol in rainbow trouts. At sublethal doses and over its 65hour half-life period, about 50% was eliminated over the gills, 30% in the feces and bile, and 20% in the urine. It was found that pentachlorophenol and its metabolites were rapidly eliminated from the bodies of fish .McKim and associates (1986) have conducted aquatic toxicokinetic studies using 14C-labeled pentachlorophenol in rainbow trouts. At sublethal doses and over its 65hour half-life period, about 50% was eliminated over the gills, 30% in the feces and bile, and 20% in the urine. It was found that pentachlorophenol and its metabolites were rapidly eliminated from the bodies of fish.

Fire Hazard

Special Hazards of Combustion Products: Generates toxic and irritating vapors.

Agricultural Uses

Fungicide, Herbicide, Slimicide, Wood preservative: Pentachlorophenol (PCP) is a commercially produced insecticide, fungicide, and slimicide. Since 1984 it has been restricted to certified applicators and is no longer available to the general public. It is primarily used to protect timber from fungal rot and wood-boring insects, but may also be used as a pre-harvest defoliant in cotton, a general pre-emergence herbicide, and as a biocide in industrial water systems. Not approved for use in EU countries. Not registered for use in the U.S. There are 48 global suppliers.

Trade name

(The U.S. EPA lists 626 active and canceled/ transferredlabelsforthischemical) CHEM-TOL®; CHLON®; CHLOROPHEN®; CRYPTOGIL OL®; DOWCIDE® 7; DOWICIDE® 7; DOW PENTACHLOROPHENOL DP-2 ANTIMICROBIAL®; DURA TREET II®; DUROTOX®; EP 30®; FORPEN-50®; FUNGIFEN®; GLAZDPENTA ®; GRUNDIER ARBEZOL®; LAUXTOL®; LIROPREM®; ONTRACK WE HERBICIDE®; ORTHO TRIOX®; OSMOSE WPC®; PENTACHLOROPHENOL, DOWICIDE EC-7®; PENTACHLOROPHENOL, DP- 2®; PENTACON®; PENTA-KIL®; PENTA READY®; PENTASOL®; PENWAR®; PERATOX®; PERMACIDE®; PERMAGARD®; PERMASAN®; PERMATOX DP- 2®PERMATOX PENTA®; PERMITE®; POL NU®; PREVENTOL P®; PRILTOX®; SANTOBRITE®; SANTOPHEN®; SINITUHO®; TERM-I-TROL®; THOMPSON'S WOOD FIX®; WATERSHED WP®; WEEDONE®; WOODTREAT A®

Safety Profile

Confirmed human carcinogen with experimental tumorigenic data. Human poison by ingestion. Poison experimentally by ingestion, skin contact, intraperitoneal, and subcutaneous routes. An experimental teratogen. Other experimental reproductive effects. A skin irritant. Mutation data reported. Acute poisoning is marked by weakness with changes in respiration, blood pressure, and urinary output. Also causes dermatitis, convulsions, and collapse. Chronic exposure can cause liver and hdney injury. Dangerous; when heated to decomposition it emits highly toxic fumes of Cl-. See also CHLOROPHENOLS

Potential Exposure

Pentachlorophenol (PCP) is a commercially produced bactericide, fungicide, and slimicide used primarily for the preservation of wood, wood products; and other materials. As a chlorinated hydrocarbon, its biological properties have also resulted in its use as an herbicide, and molluscicide. Two groups can be expected to encounter the largest exposures. One involves the small number of employees involved in the manufacture of PCP. All of these are presently under industrial health surveillance programs. The second and larger group are the formulators and wood theaters. Exposure, hygiene and industrial health practices can be expected to vary from the small theaters to the larger companies. The principal use as a wood preservative results in both point source water contamination at manufacturing and wood preservation sites and, conceivably, nonpoint source water contamination through runoff wherever there are PCP-treated lumber products exposing PCP to soil

Carcinogenicity

The IARC has determined that there is limited evidence for carcinogenicity in humans and sufficient evidence of carcinogenicity in experimental animals.

Environmental Fate

Biological. Under aerobic conditions, microbes in estuarine water partially dechlorinated pentachlorophenol to trichlorophenol (Hwang et al., 1986). The disappearance of
pentachlorophenol was studied in four aquaria with and without mud under aerobic and anaerobic conditions. Potential biological and/or chemical products identified include pentachloroanisole, 2,3,4,5-, 2,3,4,6- and 2,3,5,6-tetrachlorophenol (Boyle et al.,
Pentachlorophenol degraded in anaerobic sludge to 3,4,5-trichlorophenol which was further reduced to 3,5-dichlorophenol (Mikesell and Boyd, 1985). In activated sludge, only 0.2% of the applied amount was mineralized to carbon dioxide after 5 days (Freitag
Pentachlorophenol was statically incubated in the dark at 25°C with yeast extract and settled domestic wastewater inoculum. Significant biooxidation was observed but with a gradual adaptation over a 14-day period to achieve complete degradation at 5 mg/L substrate cultures. At a concentration of 10 mg/L, it took 28 days for pentachlorophenol to degrade completely (Tabak et al., 1981).
Melcer and Bedford (1988) studied the fate of pentachlorophenol in municipal activated sludge reactor systems that were operated at solids retention times of 10 to 20 days and hydraulic retention times of 120 days. Under these conditions, pentachloropheno

Metabolic pathway

The insecticidal, antimicrobial and fungicidal properties of pentachlorophenol were discovered some time ago and the compound was first used in the 1930s for wood preservation and treatment. This and various industrial uses and its herbicidal and molluscicidal properties have led to its widespread use. Many countries have banned the use of pentachlorophenol as a wood preservative. Its main uses are now in cooling towers, paper mills and drilling muds (Litchfield and Rao, 1998). The compound has become distributed in various ecosystems, including those close to man’s living space. It is volatile and it may be absorbed via ingestion, inhalation or skin contact.
There exists a very large literature on the toxicology, metabolism, persistence and environmental effects and fate of pentachlorophenol, with well over 500 papers published in the last 30 years. Pentachlorophenol is rapidly and completely decomposed in sunlight; it is biodegraded in soil and plants and it is metabolised in animals. Pathways include dechlorination, methylation, oxidation, conjugation with sugars and sulfate and ring scission. The environmental fate and metabolism of pentachlorophenol were reviewed in 1986 by Engelhardt et al. (1986) and Renner and Muecke (1986). The pathways reported below are largely taken from these papers which are supported by more than 120 references. Other selected papers which cover important aspects are also quoted. The microbial degradation of the compound, particularly in relation to waste clean-up, has been reviewed recently (Litchfield and Rao, 1998).

Metabolism

Pentachlorophenol was metabolized in rats by conjugation with glucuronic acid and eliminated as the glucuronide. P450 catalyzed oxidative dechlorination also occurred to form tetrachlorohydroquinone, and this was conjugated to form a monoglucuronide representing 27% of the dose administered. Other metabolites have been reported, including isomeric tetrachlorophenols, tetrachlorocatechol and tetrachlororesorcinol. Trace amounts of benzoquinones were also noted. Metabolites in female rats were tetrachloromonophenols, diphenols, and hydroquinones.

Solubility in organics

At 20 °C (g/100 g solution): methanol (57.0), anhydrous ethanol (53.0), 95% ethanol (47.5), diethylene glycol monomethyl ether (48.0), pine oil (32.0), diethylene glycol monoethyl ether (30.0), diethylene glycol (27.5), 2-ethoxyethanol (27.0), dioxane (11.5), benzene (11.0), ethylene glycol (6.0), diesel oil (3.1), fuel oil (2.6) (Carswell and Nason, 1938).

Solubility in water

At 20 °C (g/100 g solution): methanol (57.0), anhydrous ethanol (53.0), 95% ethanol (47.5), diethylene glycol monomethyl ether (48.0), pine oil (32.0), diethylene glycol monoethyl ether (30.0), diethylene glycol (27.5), 2-ethoxyethanol (27.0), dioxane (11.5), benzene (11.0), ethylene glycol (6.0), diesel oil (3.1), fuel oil (2.6) (Carswell and Nason, 1938).

Shipping

UN3155 Pentachlorophenol, Hazard Class: 6.1; Labels: 6.1-Poisonous materials.

Purification Methods

Crystallise it twice from toluene/EtOH. Sublime it in vacuo.[Beilstein 6 IV 1025.]

Degradation

Pentachlorophenol has the typical weak acidic properties of a phenol, readily forming the sodium salt. At physiological pH a major proportion is ionised and the metabolism (but not necessarily the mobility and absorption) of pentachlorophenol and its sodium salt should be very similar. The laurate ester, being lipophilic, is absorbed more readily than the phenate ion and it is also more volatile. However, the ester should be readily hydrolysed in dilute base to pentachlorophenol and lauric acid and by estersases in vivo to the same products. Thus the metabolism of the three forms may be considered together.
Pentachlorophenol is rapidly degraded under conditions of aqueous photolysis in W light and sunlight (Engelhardt et al., 1986). Products detected (Scheme 1) include the reductive dechlorination products 2,3,4,6- and 2,3,5,6-tetrachlorophenol (2 and 3) and trichlorophenols. Ring chlorine atoms were displaced by hydroxyl groups to afford 2,3,5,6-tetrachlorohydroquinone (4), tetrachlorocatechol (5) and tetrachlororesorcinol( 6). The hydroquinone (4) was very rapidly decomposed in air. Irradiation of each of 4, 5 and 6 afforded trichlorobenzenediols, trichloroquinones and 2,3-dichloromaleic acid (7).
Hydroquinone 4 oxidised in the dark (and in light) to 2,3,5,6- tetrachloro-l,4-benzoquinone (8), the 2-hydroxy analogue (9), the dichlorohydroxybenzoquinone (10) and the maleic acid (7). The latter eventually affords CO₂ and HCl.
Exposure of an aqueous solution of the sodium salt to sunlight gave small amounts of octachlorodibenzodioxin but none of the extremely toxic 2,3,7,8-tetrachloro derivative could be detected. Much of the original work on the photolysis of pentachlorophenol was reported by Wong and Crosby (1978).

Toxicity evaluation

The toxicology has been addressed in a recent risk assessment (119). Acutely, pentachlorophenol was reported to have LD₅₀ values in the rat of 12 mg/kg (inhalation) and 146 mg/kg (M)–175 mg/kg (F) by oral gavage. More detailed studies of the toxicology of pentachlorophenol have been compromised by the toxicity of impurities present in most of the earlier samples used in the evaluation process.Although a number of toxicity studies have been conducted with both known impurities and TCHQ, it is often difficult to know whether animal experiments are valid for human health risk assessment. Nevertheless, it appears that the main target organ of purified TCP in animals is the liver.
This toxicity was manifested as liver inflammation, increased relative weight, and increased serum alkaline phosphatase. The estimated chronic NOEL in the dog for these effects was 0.15 mg/kg/day, from a 1-year study, based on a LOEL of 1.5 mg/kg/day. In the rat, a significantly increased incidence of mesotheliomas (p<0.05) and nasal carcinomas in males was reported at the highest dose tested, ～60 mg/kg/day.

Incompatibilities

Reacts violently with strong oxidizers, acids, alkalies, and water.

Waste Disposal

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office. Incineration (600°to 900°C) coupled with acequate scrubbing and ash disposal facilities. Alternatively pentachlorophenol

Pentachlorophenol(87-86-5)Related Product Information

• PENTACHLOROPHENOL-UL-14C,PENTACHLOROPHENOL, [14C(U)],PENTACHLOROPHENOL-UL-14C (TOLUENE SOLUT&
• PENTACHLOROPHENOL METHYL ESTER
• Pentachlorophenol
• pentachlorophenol,sodiumsalt(technica
• PENTACHLOROPHENOL-13C6 99%,PENTACHLOROPHENOL 13C6
• Hexachlorodiphenyloxide
• PENTACHLOROPHENOL DODECANOATE
• Pentachlorophenol sodium salt hydrate
• PENTACHLOROPHENOL ACETATE
• L-PYROGLUTAMIC ACID PENTACHLOROPHENYL ESTER
• NIOBIUM PENTA-N-BUTOXIDE
• NIOBIUM PENTA-N-PROPOXIDE
• PENTA (M-DIGALLOYL) GLUCOSEN F
• PENTA-SODIUM TETRAFLUOROALUMINATE BIS(PENTAFLUORO-ALUMINATE)
• MONO PENTA ERYTHRITOL
• TANTALUM PENTA-I-PROPOXIDE
• PENTA-O-BENZOYL-ALPHA-D-GLUCOPYRANOSE
• PENTA-O-ACETYL-BETA-D-GALACTOPYRANOSE,PENTA-O-ACETYL-BETA-D-GALACTOPYRANOSIDE