2,3,5,6-Tetrafluorobenzyl alcohol Chemical Properties

Melting point:

32-38 °C

Boiling point:

220-225 °C

Density 

1.499

Flash point:

62 °C

storage temp. 

Sealed in dry,Room Temperature

form 

powder to lump to clear liquid

pka

12.94±0.10(Predicted)

color 

White or Colorless to Light yellow

CAS DataBase Reference

4084-38-2(CAS DataBase Reference)

Safety Information

Hazard Codes 

Xi

Risk Statements 

36/37/38

Safety Statements 

37/39-26

HazardClass 

IRRITANT

HS Code 

2906290090

MSDS

• Language:English Provider:ACROS
• Language:English Provider:ALFA

2,3,5,6-Tetrafluorobenzyl alcohol Usage And Synthesis

Chemical Properties

white to almost white crystalline mass

Synthesis

Weighed 20.5g pentafluorobenzonitrile, 0.2g 10% Pd/C (Baoji Ruike Pharmaceutical Chemical Co., Ltd. production), 70mL THF, 9.5g acetic acid was added to a 250mL autoclave, nitrogen replacement gas three times, pass H2 to the pressure of 10atm, warming to 55 , the reaction of 10h, the analysis of samples, raw materials disappeared, filtration of insoluble material, decompression and recovery of The solvent was recovered under reduced pressure and 25.6g of acetate of pentafluorobenzylamine was obtained, content: 97.9% (HPLC), yield: 93.8%.

Add 25.6g of acetate of pentafluorobenzenemethanamine to 100g of water, slowly add 10.2g of concentrated sulfuric acid, keep the temperature at 55, add 20g of 40% NaNO2 aqueous solution dropwise, use starch-potassium iodide test paper to test the solution until the paper turns blue, continue stirring for 1h and then raise the temperature to 85, after hydrolysis for 6h, cool to room temperature, separate out the organic phase to recover solvent and dry. Obtained 18.1g, that is pentafluorobenzyl alcohol, content: 97.3% (GC), yield: 91.8%.

Take 9.9g of pentafluorobenzyl alcohol added to 30mL of methanol, warm up to 50 , add 5.1g of Zn powder in batches, add 5.5g of concentrated hydrochloric acid slowly and dropwise, and keep the reaction at 50 for 30h, and the GC detection was done to the disappearance of raw materials, and the insoluble material was filtered out, and extracted by 225mL of methylene chloride, and then the organic phase was combined and dried with anhydrous Na₂SO₄SO₄. sub>4 drying, after evaporating the organic solvent at atmospheric pressure, then distilled under reduced pressure to collect the fraction at 84-86C/10.8 mmHg, yielding 8.0 g of product, content: 99.0% (GC), yield: 88.8%, mp: 34-36C.

2,3,5,6-Tetrafluorobenzyl alcohol(4084-38-2)Related Product Information

• 4-Hydroxybenzyl alcohol
• Ethyl acetate
• ALPHA-NAPHTHOLBENZEIN
• m-Anisyl alcohol
• 3-Fluorobenzyl alcohol
• Benzyl alcohol
• 2-Nitrobenzyl alcohol
• Benzhydrol
• 2,3,5,6-Tetrafluorobenzoic acid
• DECAFLUOROBENZHYDROL
• ETHYL PENTAFLUOROBENZOATE
• Pentafluorobenzoic acid
• 4-BROMO-2,3,5,6-TETRAFLUOROBENZOIC ACID
• O-(2,3,4,5,6-PENTAFLUOROBENZYL)HYDROXYLAMINE HYDROCHLORIDE
• 2,3,5,6-TETRAFLUORO-4-METHYLBENZOIC ACID
• 4-AMINO-2,3,5,6-TETRAFLUOROBENZOIC ACID
• 2,3,4,5,6-Pentafluorobenzyl alcohol
• PENTAFLUOROBENZYL METHACRYLATE