Optical brightener OB-1

Optical brightener OB-1 Property

Melting point:

>300 °C(lit.)

Boiling point:

533.34°C (rough estimate)

Density 

1.2151 (rough estimate)

vapor pressure 

0Pa at 25℃

refractive index 

1.5800 (estimate)

storage temp. 

Sealed in dry,Room Temperature

solubility 

DMSO (Slightly, Heated)

form 

Solid

pka

1.45±0.10(Predicted)

color 

Yellow

biological source

goat

Water Solubility 

10μg/L at 25℃

λmax

372 nm

Stability:

Stable. Incompatible with strong oxidizing agents.

InChIKey

ORACIQIJMCYPHQ-KTKRTIGZSA-N

LogP

5.499 at 25℃

CAS DataBase Reference

1533-45-5(CAS DataBase Reference)

EPA Substance Registry System

Benzoxazole, 2,2'-(1,2-ethenediyldi-4,1-phenylene)bis- (1533-45-5)

Safety

Hazard Codes 

Xi

Risk Statements 

36/37/38

Safety Statements 

26-37/39-24/25

WGK Germany 

1

HS Code 

29349990

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Optical brightener OB-1 Chemical Properties,Usage,Production

Description

Optical brightener OB-1 also called fluorescent brightener OB-1, optical brightener agent OB-1, OB-1 has the highest melting point among the optical brighteners and is also the most widely applicable and the most sold brightener. Optical brighteners OB-1 have two appearance colors, yellow and green. Worldwide use it for all kinds of plastics, or make masterbatches, then the optical brightener masterbatches and compounds are used in the plastics industry.

Chemical Properties

solid

Uses

4,4′-Bis(2-benzoxazolyl)stilbene (BBS) is suitable for use in the preparation of poly(propylene) (PP) films containing different concentrations of BBS. BBS may be employed as a viscosity-sensitive fluorophore to investigate the curing parameters in fabrication of UV-cured automotive organic protective coatings. BBS may be used in the preparation of polymeric film sensors based on excimer luminescence and responsive to both mechanical and temperature stress, by its dispersion into a thermoplastic aliphatic biodegradable polyester [poly(1,4-butylene succinate).

General Description

4,4′-Bis(2-benzoxazolyl)stilbene (BBS) is reported to exhibit consistently high absolute fluorescence quantum yields and a monoexponential lifetime in solutions. The photophysics of BBS dispersed in poly(propylene) (PP) films has been investigated. BBS is reported as a food-grade dye. BBS is also reported as excimer-forming, photoluminescent chromophore.

Flammability and Explosibility

Not classified

Synthesis

(2) Sulfide reaction. 2-(p-tolyl)benzo[d]oxazole (A) was placed in a sulfide reactor with a mass ratio of A to sulfur of 1:1 to 3:1, heated to 210-250°C and reacted for 16-24 hours. After completion of the reaction, xylene was added as a solvent, the solution was heated and filtered to give the crude product (0B-1) of (E)-1,2-bis(4-(benzo[d]oxazol-2-yl)phenyl)ethylene (B). (3) Crude refinement. The crude product B with trichlorobenzene was added to a refining kettle with activated carbon and 30% NaOH solution, heated to 220°C and kept for 2 h to dissolve B. Subsequently, the temperature of the solution was adjusted to 200-210°C, and the activated carbon was removed by filtration. The filtrate was transferred to a crystallization kettle and cooled to 20-30°C to obtain the liquid mixture C. (4) Solid-liquid separation. The liquid mixture C was filtered to separate the solid product and trichlorobenzene mother liquor. The solid cake was dried to obtain 2,2'-(4,4'-stilbenzylphenyl)phenylidenebenzobisoxazole. The trichlorobenzene mother liquor can be used directly in the next batch of the refining process. The product 0B-1 prepared in Example 1 has a purity of 99% and a yield of 93%.

Properties and Applications

References

[1] Patent: CN103772309, 2016, B. Location in patent: Paragraph 0014-0019
[2] Chemistry of Heterocyclic Compounds, 1981, vol. 17, # 4, p. 328 - 332
[3] Chemistry of Heterocyclic Compounds, 1981, vol. 17, # 4, p. 328 - 332