Butylnaphtalenesulfonic Acid Sodium Salt Property

CAS DataBase Reference

25638-17-9(CAS DataBase Reference)

EPA Substance Registry System

Butylnaphthalenesulfonic acid sodium salt (25638-17-9)

Safety

Risk Statements 

36/37/38-52/53

Safety Statements 

26-36/37/39

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H302Harmful if swallowed

H315Causes skin irritation

H318Causes serious eye damage

H332Harmful if inhaled

H335May cause respiratory irritation

Precautionary statements

P233Keep container tightly closed.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P304IF INHALED:

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P310Immediately call a POISON CENTER or doctor/physician.

P312Call a POISON CENTER or doctor/physician if you feel unwell.

P321Specific treatment (see … on this label).

P330Rinse mouth.

P332+P313IF SKIN irritation occurs: Get medical advice/attention.

P340Remove victim to fresh air and keep at rest in a position comfortable for breathing.

P362Take off contaminated clothing and wash before reuse.

P403Store in a well-ventilated place.

P403+P233Store in a well-ventilated place. Keep container tightly closed.

P405Store locked up.

P501Dispose of contents/container to..…

Butylnaphtalenesulfonic Acid Sodium Salt Chemical Properties,Usage,Production

Uses

Butylnaphtalenesulfonic Acid Sodium Salt has excellent penetration, wetting, emulsifying, diffusing and foaming properties. It is resistant to acid, alkali, hard water, and inorganic salts, and it can greatly increase the permeability when mixed with a small amount of salt. It is widely used in various processes in the textile printing and dyeing industry, mainly used as penetrating agent and wetting agent, and can also be used as detergent, dyeing aid, dispersing agent, insecticide and herbicide.

Synthesis

The solution of naphthalene in n-butanol was stirred with dropwise concentrated sulfuric acid. Then the mixtrue was slowly raised to 50-55°C and kept for 6h, After standing, the lower layer of acid was released. The upper layer reaction solution is neutralized with alkali, then bleached with sodium hypochlorite, settled, filtered, sprayed, and dried to give Butylnaphtalenesulfonic Acid Sodium Salt.