2-METHOXYPHENYLZINC IODIDE 0.5M Property

Density 

0.996 g/mL at 25 °C

Flash point:

1 °F

storage temp. 

2-8°C

Sensitive 

Air & Light Sensitive

Exposure limits

ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)
OSHA: TWA 200 ppm(590 mg/m3)
NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3)

Safety

Hazard Codes 

F,Xn

Risk Statements 

19-22-36/38-40-36/37-14-11

Safety Statements 

16-26-33-36-36/37

RIDADR 

UN 2056 3/PG 2

WGK Germany 

1

HazardClass 

4.3

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H261In contact with water releases flammable gas

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

H318Causes serious eye damage

H319Causes serious eye irritation

H333May be harmful if inhaled

H335May cause respiratory irritation

H351Suspected of causing cancer

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P223Keep away from any possible contact with water, because of violent reaction and possible flash fire.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P370+P378In case of fire: Use … for extinction.

P403+P235Store in a well-ventilated place. Keep cool.

P405Store locked up.

2-METHOXYPHENYLZINC IODIDE 0.5M Chemical Properties,Usage,Production

Uses

2-Methoxyphenylzinc iodide can be used:

• As a substrate in the synthesis of aryl ketones by reacting with aroyl chlorides.
• As a starting material in the synthesis of sulfones by reacting with DABSO reagent and alkyl halides.