Trovafloxacin Mesylate Property

Melting point:

>250°C (dec.)

storage temp. 

room temp

solubility 

DMSO: >10mg/mL

form 

powder

color 

white to off-white

Safety

Hazard Codes 

C

Risk Statements 

63-34

Safety Statements 

26-36-45

RIDADR 

UN 1759 8 / PGIII

WGK Germany 

3

RTECS 

QN2791250

Toxicity

women,LDLo,oral,2mg/kg (2mg/kg),SKIN AND APPENDAGES (SKIN): "DERMATITIS, OTHER: AFTER SYSTEMIC EXPOSURE",Archives of Internal Medicine. Vol. 159, Pg. 2225, 1999.

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

H361Suspected of damaging fertility or the unborn child

Precautionary statements

P201Obtain special instructions before use.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Trovafloxacin Mesylate Chemical Properties,Usage,Production

Description

Trovafloxacin is a broad spectrum antibiotic that inhibits the uncoiling of supercoiled DNA in bacteria by blocking the activity of topoisomerase IV (IC₅₀ = 3.02 μg/ml) and DNA gyrase (IC₅₀ = 7.13 μg/ml).

Chemical Properties

White Solid

Originator

Trovan,Pfizer,USA

Uses

Trovafloxacin mesylate has been used as a test compound in toxicity assay to assess its toxicity in 2D hepatocyte cultures. It has also been used to manipulate the mechanism of apoptotic cell disassembly during apoptosis.

Uses

Fluorinated quinolone antibacterial. Trovafloxacin mesylate blocks the activity of DNA gyrase and topoisomerase IV, enzymes essential in the repliction, transcription, and repair of bacterial DNA.

Definition

ChEBI: A methanesulfonate (mesylate) salt prepared from equimolar amounts of trovafloxacin and methanesulfonic acid. A broad-spectrum antibiotic that was withdrawn from the market due to risk of liver failure.

Manufacturing Process

N-Benzylmaleimide (500 g, 2.67 mole), 90% bromonitromethane (831 g, 5.34 mole), powdered molecular sieves 200 mesh (2020 g) and toluene (12 dm3) were stirred under nitrogen at -10°C. 1,2-Dimethyl-1,4,5,6- tetrahydropyrimidine (616 g, 5.49 mole) was added slowly over about 3 h maintaining the reaction temperature at <-8°C throughout the addition. After completion of the addition, the reaction mixture was stirred for 1.5 h at 25°C, filtered under a nitrogen atmosphere in a sealed pressure filter to remove sieves and resulting tar, and the sieves were washed with toluene (2 L). The combined filtrates were washed with 2 N dilute hydrochloric acid (3 times 750 cm3), treated with carbon (50 g) at 70°C, 1 h filtered, concentrated, and triturated with 2-propanol (about 4 dm3) to obtain crystals of the (1α,5α,6α)- 3-N-benzyl-6-nitro-2,4-dioxo-3-azabicyclo[3.1.0]hexane (223 g, 34%) melting point 116°-118°C.
Tetrahydrofuran (350 cm3), sodium borohydride (14.1 g) and (1α,5α,6α)-3-N_x0002_benzyl-6-nitro-2,4-dioxo-3-azabicyclo[3.1.0]hexane (35.0 g, mmol) obtained above were stirred under nitrogen for 0.25 h and then treated dropwise with boron trifluoride-THF complex containing 21.5% BF3 (44.9 cm3) so that the exotherm was controlled to <40°C. After addition was completed, the reaction mixture was stirred for 3 h at 40°C, quenched slowly with water/THF 1:1 (70 cm3) to avoid excessive foaming, and stirred for 0.5 h at 50°C to ensure that the quench of unreacted diborane generated in situ was completed. The quench formed a salt slurry which was filtered and washed with THF (140 cm3); the combined filtrate was partially concentrated, diluted with water (350 cm3) and further concentrated to remove most of the THF, and extracted with ethyl acetate (140 cm3). The resulting ethyl acetate solution was concentrated to afford the (1α,5α,6α)-3-N-benzyl-6-nitro-3-azabicyclo[3.1.0]hexane as a clear oil (30.6 g, 97%).
(1α,5α,6α)-3-N-Benzyl-6-nitro-3-azabicyclo[3.1.0]hexane (30.9 g, 142 mmol) obtained above, 2-propanol (310 cm3), water (30 cm3), and 10% Pd on carbon, 50% water content (12.3 g) were hydrogenated at 50 psi and 50°C for 18-24 h in a Parr shaker. The Pd catalyst was filtered off, and the resulting pale yellow filtrate was azeotropically distilled at constant volume to remove water. The resulting solution was treated with triethylamine (46 g, 456 mmol) and heated to reflux. Benzaldehyde (15.0 g, 141 mmol) was added dropwise over 15 min. The reaction mixture was heated at reflux for 4 h to form (1α,5α,6α)-6-benzylidenylamino-3-azabicyclo[3.1.0]hexane in situ. The resulting orange solution was cooled to 40°-50°C, and ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid (42.45 g, 111 mmol; see United Kingdom Patent Publication No. GB 2,191,776) and triethylamine (13.1 g, 130 mmol) were added. The resulting slurry was heated at reflux for 16-18 h, cooled to 20°C and stirred for 5 h. The slurry was filtered, and the compound was isolated as a white solid (75.5% yield based on (1α,5α,6α)-3-N-benzyl-6-nitro-2,4-dioxo-3- azabicyclo[3.1.0]hexane; 96.6% based on ethyl 7-chloro-1-(2,4- difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid). The ethyl (1α,5α,6α)-7-(6-benzylidenylamino-3-azabicyclo[3.1.0]hex- 3yl)-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3- carboxylate was recrystallized from acetonitrile, melting point 148°-155°C decomp.
Tetrahydrofuran (250 cm3), ethyl (1α,5α,6α)-7-(6-benzylidenylamino-3- azabicyclo[3.1.0]hex-3-yl)-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo- 1,8-naphthyridine-3-carboxylate (25.05 g, 47 mmol) obtained above, and water (250 cm3) were treated with 97% methanesulfonic acid (13.3 g, 138 mmol) and heated to reflux for 24 h. The resulting solution was cooled to 45°C, treated with activated carbon (2.5 g) for 1 h and filtered. The resulting filtrate was concentrated under vacuum to approximately 25% of its original volume to provide a white crystal slurry, cooled to 15°-25°C, granulated for 4 h and filtered to yield the trovafloxacin methanesulfonate salt (mesylate) (16.86 g, 70.0%). Melting point 253°-256°C decomp.

brand name

Trovan (Pfizer).

Therapeutic Function

Antibacterial

Biological Activity

Fluoroquinolone antibiotic. Inhibits bacterial DNA topoisomerase IV and DNA gyrase and forms a stable quinolone-DNA complex with these enzymes which reversibly inhibits DNA synthesis. Displays potent activity against gram-positive and gram-negative bacteria.

Biochem/physiol Actions

Trovafloxacin mesylate acts as a pannexin1 (Panx1) inhibitor.

storage

Desiccate at RT