Boron trifluoride Property

Melting point:

−127 °C(lit.)

Boiling point:

−100 °C(lit.)

Density 

0.87 g/mL at 20 °C

vapor density 

2.38 (21 °C, vs air)

vapor pressure 

>1 mmHg at 20 °C

refractive index 

n20/D 1.38

Flash point:

4°C

storage temp. 

2-8°C

solubility 

soluble in H2O

form 

Liquid

color 

Colorless

Odor

Pungent odor detectable at 1.5 ppm

Water Solubility 

MAY DECOMPOSE

Sensitive 

Moisture Sensitive

Merck 

14,1349

Exposure limits

ACGIH: TWA 0.1 ppm(2.5 mg/m3); Ceiling 0.7 ppm
OSHA: Ceiling 1 ppm(3 mg/m3)
NIOSH: IDLH 25 ppm(250 mg/m3); Ceiling 1 ppm(3 mg/m3)

LogP

1.070 (est)

CAS DataBase Reference

7637-07-2(CAS DataBase Reference)

NIST Chemistry Reference

Borane, trifluoro-(7637-07-2)

EPA Substance Registry System

Boron trifluoride (7637-07-2)

Safety

Hazard Codes 

T+,C,T,F

Risk Statements 

14-26-35-39/23/24/25-24/25-11-67-41-10-37-22

Safety Statements 

9-26-28-36/37/39-45-28A-16

RIDADR 

UN 3286 3/PG 2

OEL

Ceiling: 1 ppm (3 mg/m3)

WGK Germany 

3

RTECS 

ED2275000

F 

21

Hazard Note 

Corrosive/Toxic

TSCA 

Yes

DOT Classification

2.3, Hazard Zone B (Gas poisonous by inhalation)

HazardClass 

2.3

Hazardous Substances Data

7637-07-2(Hazardous Substances Data)

Toxicity

LC50 inhal (rat) 387 ppm (1070 mg/m3; 1 h)
PEL (OSHA) 1 ppm (3 mg/m3; ceiling)
TLV (ACGIH) 1 ppm (3 mg/m3; ceiling)

IDLA

25 ppm

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H280Contains gas under pressure; may explode if heated

H314Causes severe skin burns and eye damage

H330Fatal if inhaled

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P410+P403Protect from sunlight. Store in a well-ventilated place.

Boron trifluoride Chemical Properties,Usage,Production

Description

Boron trifluoride is the inorganic compound with the formula BF3. It is a highly toxic, colorless and nonflammable gas with a penetrating and pungent odor. It dissolves quickly in water and any organic compounds containing nitrogen or oxygen. It can be slowly hydrolyzed by cold water to give off hydrofluoric acid, and can also hydrolyzes to form white dense fumes in moist air. Its vapors are heavier than air. Inhaling the gas will irritate the respiratory system and burns can result if the gas touches the skin in high concentrations.

boron trifluoride lewis structure
Boron trifluoride is most importantly used as a reagent, typically as a Lewis acid, to catalyze such diverse operations as isomerization, alkylation, polymerization, esterfication, condensation, cyclization, hydration dehydration, sulfonation, desulfurization nitration, halogenation oxidation and acylation. Besides, it can also be used as a versatile building block for other boron compounds.

Chemical Properties

Boron trifluoride, BF3, is a colorless gas with a vapor density of 2.34, which is heavier than air. It is water-soluble and does not support combustion. It is also water-reactive, toxic by inhalation, and corrosive to skin and tissue. The TLV is 1 ppm, and the IDLH is 100 ppm in air. The boiling point is −148°F (64°C). The four-digit UN identification number is 1008. The NFPA 704 designation is health 4, flammability 0, and reactivity 1. The primary uses are as a catalyst in organic synthesis, in instruments for measuring neutron intensity, in soldering fluxes, and in gas brazing.

References

1. https://en.wikipedia.org/wiki/Boron_trifluoride
2. https://cameochemicals.noaa.gov/chemical/255
3. http://www.c-f-c.com/specgas_products/boron-trifluoride.htm
4.https://www.praxairdirect.com/Specialty-Gas-Information-Center/Pure-Gas-Specifications/Boron-Trifluoride.html

Description

Boron trifluoride is a nonflammable, colorlessgas with a pungent, suffocating odor. Forms dense whitefumes in moist air. Shipped as a nonliquefied compressedgas. Molecular weight=67.8; Relative vapor density (air-5 1)=2.38; Boiling point=2100℃; Freezing/Meltingpoint=-127℃. Hazard Identification (based on NFPA-704 M Rating System): Health 3, Flammability 0,Reactivity 1 . Reacts with water; solubility in coldwater=106%.

Chemical Properties

Boron trifluoride is a nonflammable, colorless gas with an acrid suffocating odor. It forms thick acidic fumes in moist air. Dry boron trifluoride is used with mild steel, copper, copper-zinc and copper-silicon alloys, and nickel. Moist gas is corrosive to most metallic materials and some plastics. Therefore, Kel-F and Teflon are the preferred gasketing materials. Mercury containing manometers should not be used because boron trifluoride is soluble in mercury. It decomposes in hot water yielding hydrogen fluoride, Shipped as a nonliquefied compressed gas.

Physical properties

Colorless gas; pungent suffocating odor; density 2.975 g/L; fumes in moist air; liquefies at -101°C; solidifies at -126.8°; vapor pressure at -128°C is 57.8 torr; critical temperature -12.2°C; critical pressure 49.15 atm; critical volume 115 cm³/mol; soluble in water with partial hydrolysis; solubility in water at 0°C 332 g/100g; also soluble in benzene, toluene, hexane, chloroform and methylene chloride; soluble in anhydrous concentrated sulfuric acid.

Uses

Boron trifluoride is used as a catalyst for polymerizations, alkylations, and condensation reactions; To protect molten magnesium and its alloys from oxidation; as a gas flux for internal soldering or brazing; in ionization chambers for the detection of weak neutrons; and as a source of B10 isotope.  By far the largest application of boron trifluoride is in catalysis with and without promoting agents.

Uses

Boron trifluoride is the most widely used boron halide. Most applications take advantage of its strong Lewis acidity. The most important uses are in organic syntheses. Boron trifluoride is commonly used as a catalyst for Friedel-Crafts alkylation reactions. It also is used to catalyze the cleavage of ethers to alcohols, to catalyze esterification reactions, and in the nitration and sulfonation of aromatic compounds. Many olefin polymerization reactions use BF3 as an initiator, in conjunction with a proton donor, such as water. Also BF3 is used to catalyze the isomerization of alkenes and alkanes and in petroleum cracking and desulfurization. Amine complexes of BF3 are used as epoxy curing agents.

Definition

ChEBI: Boron trifluoride is a boron fluoride.

Preparation

Boron trifluoride is prepared by treating borax with hydrofluoric acid; or boric acid with ammonium bifluoride. The complex intermediate product is then treated with cold fuming sulfuric acid.

General Description

Boron trifluoride is a colorless gas with a pungent odor. Boron trifluoride is toxic by inhalation. Boron trifluoride is soluble in water and slowly hydrolyzed by cold water to give off hydrofluoric acid, a corrosive material. Its vapors are heavier than air. Prolonged exposure of the containers to fire or heat may result in their violent rupturing and rocketing.

Air & Water Reactions

Fumes in air. Soluble in water and slowly hydrolyzed by cold water to give hydrofluoric acid. Reacts more rapidly with hot water.

Reactivity Profile

Boron trifluoride is a colorless, strongly irritating, toxic gas. Upon contact with water, steam or when heated to decomposition, Boron trifluoride will produce toxic fluoride fumes. Incompatible with alkyl nitrates, calcium oxide. Reaction with alkali metals or alkaline earth metals (except magnesium) will cause incandescence [Bretherick, 5th ed., 1995, p. 65].

Hazard

Toxic by inhalation, corrosive to skin and tissue. Lower respiratory tract irritant, and pneu- monitis.

Health Hazard

Boron trifluoride (and organic complexes such as BF3-etherate) are extremel corrosive substances that are destructive to all tissues of the body. Upon contact with moisture in the skin and other tissues, these compounds react to form hydrofluoric acid and fluoroboric acid, which cause severe burns. Boron trifluoride gas is extremely irritating to the skin, eyes, and mucous membranes. Inhalation of boron trifluoride can cause severe irritation and burning of the respiratory tract, difficult breathing, and possibly respiratory failure and death. Exposure of the eyes to BF can cause severe burns and blindness. This compound is not considered to have adequate warning properties. Boron trifluoride has not been found to be carcinogenic or to show reproductive or developmental toxicity in humans. Chronic exposure to boron trifluoride gas can cause respiratory irritation and damage.

Fire Hazard

When heated to decomposition or upon contact with water or steam, Boron trifluoride will produce toxic and corrosive fumes of fluorine containing compounds. Decomposes upon heating or on contact with moist air, forming toxic and corrosive fumes of boric acid and hydrofluoric acid. Reacts with alkalis and fumes in moist air, producing particulates which reduce visibility. Reacts with alkali metals, alkaline earth metals (except magnesium), alkyl nitrates, and calcium oxide. Boron trifluoride hydrolyzes in moist air to form boric acid, hydrofluoric acid, and fluoboric acid.

Flammability and Explosibility

Boron trifluoride gas is noncombustible. Water should not be used to extinguish any fire in which boron trifluoride is present. Dry chemical powder should be used for fires involving organic complexes of boron trifluoride.

Materials Uses

Dry boron trifluoride does not react with the common metals of construction, but If moisture is present the acidic hydrates formed (BF3·H2O and BF3·2H2O) can corrode many common metals rapidly. Consequently, lines, pressure regulators, and valves in boron trifluoride service must be well protected from the entrance of moist air between periods of use. Cast iron must not be used because active fluorides attack its structure. If steel piping is used for boron trifluoride, forged-steel fittings must be used instead of cast-iron fittings. Stainless steel, Monel, nickel, and Hastelloy C are good materials of construction.
Among materials suitable for gaskets are Teflon, Kel F, and other appropriate fluorocarbon or chlorofluorocarbon plastics. Most plastics become embrittled in boron trifluoride service. The use of polyvinyl chloride should be avoided.

Potential Exposure

Boron trifluoride is a highly reactive chemical used primarily as a catalyst in chemical synthesis. It is stored and transported as a gas, but can be reacted with a variety of materials to form both liquid and solid compounds. The magnesium industry utilizes the fireretardant and antioxidant properties of boron trifluoride in casing and heat treating. Nuclear applications of boron trifluoride include neutron detector instruments; boron-10 enrichment and the production of neutroabsorbing salts for molten-salt breeder reactors.

Physiological effects

Boron trifluoride irritates the nose, mucous membranes, and other parts of the respiratory system. Concentrations as low as I ppm in air can be detected by the sense of smell and are readily visible.
ACGIH recommends a Threshold Limit Value-Ceiling (TLV-C) of 1 ppm (2.8 mg/m3) for boron trifluoride. The TLV-C is the concentration that should not be exceeded during any part of the working exposure.

First aid

If contact with liquid, treat for frostbite. If thischemical gets into the eyes, remove any contact lenses atonce and irrigate immediately for at least 30 min, occasionally lifting upper and lower lids. Seek medical attentionimmediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap andwater. Seek medical attention immediately. If this chemicalhas been inhaled, remove from exposure, begin rescuebreathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart actionhas stopped. Transfer promptly to a medical facility. Whenthis chemical has been swallowed, get medical attention.Give large quantities of water and induce vomiting. Do notmake an unconscious person vomit. Medical observation isrecommended for 24
48 h after breathing overexposure, aspulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consideradministering a corticosteroid spray.

storage

All work with boron trifluoride should be conducted in a fume hood to prevent exposure by inhalation, and splash goggles and impermeable gloves should be worn to prevent eye and skin contact. Cylinders of boron trifluoride should be stored in locations appropriate for compressed gas storage and separated from alkali metals, alkaline earth metals, and other incompatible substances. Solutions of boron trifluoride should be stored in tightly sealed containers under an inert atmosphere in secondary containers.

Shipping

UN1008 Boron trifluoride, Hazard class: 2.3; Labels: 2.3—Poisonous gas, 8—Corrosive material, Inhalation Hazard Zone B. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.

Purification Methods

The usual impurities-bromine, BF5, HF and non-volatile fluorides-are readily separated by distillation. Brown and Johannesen [J Am Chem Soc 72 2934 1950] passed BF3 into benzonitrile at 0o until the latter was saturated. Evacuation to 10-5mm then removed all traces of SiF4 and other gaseous impurities. [A small amount of the BF3-benzonitrile addition compound sublimes and is collected in a U-tube cooled to -80o]. The pressure is raised to 20mm by admitting dry air, and the flask containing the BF3 addition compound is warmed with hot water. The BF3 that evolves is passed through a -80o trap (to condense any benzonitrile) into a tube cooled in liquid air. The addition compound with anisole can also be used. BF3 can be dried by passing it through H2SO4 saturated with boric oxide. It fumes in moist air. [It is commercially available as a 1.3M solution in MeOH or PrOH.] [Booth & Wilson Inorg Synth I 21 1939, Kwasnik in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I pp 219-222 1963.] TOXIC.

Incompatibilities

Boron trifluoride reacts with polymerized unsaturated compounds. Decomposes on contact with water, moist air, and other forms of moisture, forming toxic and corrosive hydrogen fluoride, fluoroboric acid, and boric acid. Reacts violently with alkali and alkaline earth metals (except magnesium); metals, such as sodium, potassium, and calcium oxide, and with alkyl nitrates. Attacks many metals in presence of water.

Waste Disposal

Return refillable compressed gas cylinders to supplier. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. Chemical reaction with water to form boric acid, and fluoroboric acid. The fluoroboric acid is reacted with limestone, forming boric acid and calcium fluoride. The boric acid may be discharged into a sanitary sewer system while the calcium fluoride may be recovered or landfilled. Protect cylinder and labels from physical damage.

Precautions

Exposures to boron trifl uoride in occupational work areas cause irritating effects, painful burns, lesions, and loss of vision. Workers with potential exposure to boron trifl uoride should not wear contact lenses. Prompt medical attention is mandatory in all cases of overexposure to boron trifl uoride and the rescue personnel should be equipped with proper protectives. Occupational workers should handle/use boron trifl uoride only in well-ventilated areas. The valve protection caps must remain in place. Workers should not drag, slide, or roll the cylinders, and use a suitable hand truck for cylinder movement. Compressed gas cylinders shall not be refi lled without the express written permission of the owner. Boron trifl uoride is listed as an extremely hazardous substance (EHS). The cylinder should not be heated by any means to increase the discharge rate of the product from the cylinder. The cylinder of boron trifl uoride should be kept stored in a cool, dry, well-ventilated area of non-combustible construction away from heavily traffi cked areas and emergency exits

GRADES AVAILABLE

Boron trifluoride is available for commercial and industrial use in technical grades having much the same component proportions from one producer to another.
Boron trifluoride is also available in high-purity grades for use in the electronics industry. Gas purity guidelines have been developed and published by the Semiconductor Equipment and Materials International and can be found in the Book ofSEMI Standards, Gases Volume.