Beryllium hydride Property

Density 

0.650

solubility 

reacts with H2O; insoluble in ethyl ether, toluene

form 

white amorphous solid

color 

White

Water Solubility 

reacts slowly with H2O, rapidly with dilute acids evolving H2(g) [MER06]

Safety

RIDADR 

1409

HazardClass 

4.3

PackingGroup 

II

Hazard and Precautionary Statements (GHS)

Beryllium hydride Chemical Properties,Usage,Production

Chemical Properties

Beryllium hydride (BeH2) as a solid and also as a molecular polymer (upto decamer). It does not have any common uses. All beryllium compounds are quite toxic.
Beryllium hydride (BeH2) is a simple light weight metal hydride well known for its hydrogen storage capability. The crystalline BeH2 has been reported as a three dimensional array of tetrahedral BeH4 molecules and not as BeH2 chains. The beryllium hydride oligomers are obtained from the excited beryllium (1Po) atom and hydrogen molecule. These are very difficult to synthesize and are easily hydrolyzed by dilute acids. Because of its high hydrogen storage capacity (18.2 wt%), it is of considerable interest especially for use in nuclear reactor and also as a rocket fuel.

Beryllium hydride is an example of linear electron pair and molecular geometry. This molecule is electron deficient and does not follow the octet rule because it has only 4 valence electrons. The hydrogen atoms are as far apart as possible if opposite each other at 180o. This is linear geometry.

Beryllium Compounds

In the mid-1960s, considerable interest in beryllium hydride was generated by its potential use with ammonium perchlorate oxidizer in solid propellants for rockets. Beryllium hydride, BeH2 , was prepared by action of ethereal lithium-aluminum hydride with beryllium chloride. A white powder resulted from which the complete removal of ether was difficult. The hydride is not stable above 125 °C (255 °F), decomposing into beryllium and hydrogen.
Beryllium hydride is a three-dimensional polymer, considerably ionic in character and containing Be2+ and H- ions. Alternatively, it may be considered to be an electron-deficient molecule, similar to beryllium chloride and the beryllium alkyls, with hydrogen bridges between the two beryllium atoms (BeH2Be).

Three-dimensional molecule of beryllium hydride

Description

BeH2 was first synthesized in 1951 by reacting dimethylberyllium, Be(CH3)2, with lithium aluminum hydride, LiAlH4. A purer grade of BeH2 can also be formed from the pyrolysis of di-tert-butylberyllium, {Be(C(CH3)3)2} at 210°C. The purest beryllium hydride is obtained by the reaction of triphenylphosphine, i.e. PPh3,with berylliumborohydride,Be(BH4)2 by the reaction:
Be(BH4)2+2PPh3→2Ph3PBH3 + BeH2
Note that unlike the other elements in Group IIA where the hydride can be prepared by reaction of the elements, the reaction of the metal with hydrogen to produce beryllium hydride has not proved possible. BeH2 is usually formed as an amorphous white solid, but a hexagonal crystalline form with a higher density (~0.78 g/cm3) has also been reported. This was prepared by heating amorphous BeH2 under pressure, with 0.5–2.5% LiH as a catalyst. A more recent investigation found that crystalline beryllium hydride has a bodycentered orthorhombic unit cell, containing a network of corner-sharing BeH4 tetrahedra (there are 12BeH2 molecules in the unit cell) in contrast to the flat, hydrogen-bridged, infinite chains previously thought to exist in crystalline BeH2. Studies of the amorphous form also find that it consists of a network of cornershared tetrahedra. The density is 0.755 g/cm3.

Chemical Properties

Beryllium Hydride, BeH2 is an amorphous, colorless, highly toxic polymeric solid (H = 18.3%) that is stable to water but hydrolyzed by acid. It is insoluble in organic solvents but reacts with tertiary amines at 160 °C to form stable adducts, eg, (R3N· BeH2)2. Beryllium hydride was formerly of interest as a rocket fuel and as a moderator for nuclear reactors. Toxicity has been a serious barrier to its commercialization.

Chemical Properties

white, amorphous solid; inert to laboratory air; can be prepared by continuous thermal decomposition of a di-t-butylberyllium ethyl ether complex in a boiling hydrocarbon; has found use as rocket fuel and as a moderator for nuclear reactors [KIR80] [MER06]

Physical properties

White amorphous solid; density 0.65 g/cm³; decomposes at 250°C; reacts with water.

Uses

Beryllium hydride (BeH2) liberates hydrogen gas when mixed with water. It is used as a source of hydrogen in experimental rockets and fuel cells. It has also been considered as a moderator for nuclear reactors. Methods of preparing and densifying the pure compound are described in a large number of patents. However, the toxicity has always been a serious barrier to its commercial exploitation.

Definition

ChEBI: Beryllium dihydride is a beryllium hydride.

Preparation

Beryllium hydride is made by treating an ethereal solution of beryllium borohydride with triphenylphosphine, or by pyrolysis of di-tert-butylberyllium.

Manufacturing Process

The only known method of producing high purity beryllium hydride (95 – 98 wt % BeH2) is the pyrolysis of di-tert-butylberyllium diethyl etherate in a high boiling hydrocarbon at 200 ℃:

Safety Profile

Confirmed carcinogen. Adangerous fire hazard. When heated to 220°C it liberatesexplosive hydrogen gas. Reacts violently with methanol,water, and dilute acids. When heated to decomposition itemits toxic fumes of BeO. See BERYLLIUMCOMPOUNDS and HYDRIDE