Isophorone diisocyanate Property

Melting point:

-60°C

Boiling point:

158-159 °C15 mm Hg(lit.)

Density 

1.049 g/mL at 25 °C(lit.)

vapor pressure 

0.0004 hPa (20 °C)

refractive index 

n20/D 1.484(lit.)

Flash point:

>230 °F

storage temp. 

Store below +30°C.

solubility 

Miscible with esters, ketones, ethers, and aromatic and aliphatic hydrocarbons.

form 

Liquid

color 

Clear colorless to slightly yellow

explosive limit

0.7-4.5%(V)

Water Solubility 

<0.1 g/100 mL at 25 ºC

Sensitive 

Moisture Sensitive

BRN 

2726467

Exposure limits

TLV-TWA 0.0454 mg/m³ (0.005 ppm) (ACGIH and NIOSH); ceiling 0.181 mg/m³ (0.02 ppm)/10 min (NIOSH). .

Stability:

Reacts with all substances containing active hydrogen, such as acids, amines, water, phenols, mercaptans, amides, urea. Probably moisture sensitive.

InChIKey

NIMLQBUJDJZYEJ-UHFFFAOYSA-N

LogP

4.75 at 25℃

CAS DataBase Reference

4098-71-9(CAS DataBase Reference)

EPA Substance Registry System

Isophorone diisocyanate (4098-71-9)

Safety

Hazard Codes 

T,N

Risk Statements 

23-36/37/38-42/43-51/53-22

Safety Statements 

26-28-38-45-61

RIDADR 

UN 2290 6.1/PG 3

WGK Germany 

2

RTECS 

NQ9370000

Autoignition Temperature

430 °C

TSCA 

Yes

HazardClass 

6.1

PackingGroup 

III

HS Code 

29291090

Hazardous Substances Data

4098-71-9(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: 4825 mg/kg LD50 dermal Rat > 7000 mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H315Causes skin irritation

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H330Fatal if inhaled

H334May cause allergy or asthma symptoms or breathing difficulties if inhaled

H335May cause respiratory irritation

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Isophorone diisocyanate Chemical Properties,Usage,Production

Description

Isophorone diisocyanate (IPDI) (CAS No. 4098-71-9) is a clear to pale-yellow liquid with a camphorlike odor which is insoluble in water and miscible with most common organic solvents. IPDI exists in two conformers, cis and trans. Their reactivities are similar and each conformer is an asymmetrical molecule with the secondary isocyanate group being more reactive than the primary isocyanate group. Since the substance does not contain any groups that might oxidize or spontaneously ignite, it is not expected that IPDI would self-ignite, oxidize, or explode at ambient conditions. The water solubility is approximately 15 mg l-1 at 23 ℃, and hydrolysis with a half-life of about an hour leads to polymers or to the corresponding diamine.

Chemical Properties

Isophorone diisocyanate is a liquid with a vapour pressure which is significantly lower than that of tolylene diisocyanate.

Chemical Properties

colourless or slightly yellow liquid

Uses

Yields polyurethanes with high stability, resistance to light discoloration, and chemical resistance.

Uses

Isophorone diisocyanate (IPDI) is used in theproduction of high-quality coatings, polyurethane paints, and varnishes and as an elastomer for casting compounds..

Uses

Isophorone diisocyanate is used in the manufacture of polyurethane with high stability, resistance to light discoloration and chemical resistance; used in paints and varnishes for hardness, flexibility, abrasion, chemical resistance to chalking and weathering; as an elastomer applicable for casting compounds and mastics to highly flexible textile coatings; foams; hard industrial coatings; manufacture of contact lenses; curing.

Definition

ChEBI: A diisocyanate in which the two isocyanate groups are linked by an isophorone substituent.

Preparation

Isophorone diisocyanate (IPDI) is prepared by the phosgenation of isophorone diamine (l-amino-3-aminomethyl-3,5,5-trimethylcydohexane):

General Description

A clear to light-yellow liquid. Slightly denser than water and insoluble in water. Toxic by inhalation and skin absorption. Very irritating to skin. Used to make polyurethane coatings.

Air & Water Reactions

Insoluble in water. Isophorone diisocyanate may be sensitive to moisture.

Reactivity Profile

Isophorone diisocyanate reacts with all substances containing active hydrogen atoms such as water, alcohols, phenols, amines, mercaptans, amides, urethanes and ureas.

Hazard

A severe irritant, toxic by skin absorption.

Health Hazard

Like most other isocyanates, IPDI exhibitsmoderate toxicity via inhalation. The acutetoxic symptoms are somewhat similar tothose of toluene-2,4- diisocyanate and diphenylmethane-4,4'-diisocyanate. Thus thetoxicity of such types is a characteristic ofthe -N=C=O functional group and to agreat extent is independent of the nature ofthe ring.
Inhalation of its vapor can cause bronchitis, asthma, tightness of chest, and dyspnea in humans. Recovery from these effectsmay occur in a short period from a lowconcentration exposure.
IPDI is an irritant to the skin and eyes.Exposure to this compound produces skinsensitization and eczema. Its oral toxicity isvery low.
LC50 value, inhalation (rats): 123 mg/m³/4 hrLD50 value, skin (rats): 1060 mg/m³
There is no report of its carcinogenic orreproductive effects in animals or humans.

Health Hazard

Isophorone diisocyanate is highly toxic by inhalation and moderately toxic through the skin. (Non-Specific -- Isocyanates) People with skin or respiratory problems should avoid exposure.

Fire Hazard

When heated to decomposition, Isophorone diisocyanate emits toxic fumes of nitrogen oxides.

Environmental Fate

IPDI is a synthetic organic chemical, which does not occur naturally in the environment. At room temperature, it is a liquid. It is miscible with alcohol, diglycol, monoethyl ether, ether, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene, and olive oil. IPDI decomposes in water producing CO2, which can produce significant pressure in a closed container. Upon contact with water or moist air, IPDI will react to form stable, insoluble polyurea solids. This reactivity dramatically limits the mobility of these products in the event of a spill (spills are localized and have only transient impact), and the products will tend to remain in, and react within, the environment to which they are released. IPDI is not readily biodegradable. It reacts with water forming solid insoluble polyurea, isophorone diamine (IPDA), and CO2, thus the predominant removal mechanism is expected to be hydrolysis. The rate constant of the OH radical sensitized indirect photodegradation of isophorone diisocyanate corresponds to a half-life of 1.8 days at a 24 h mean OH radical concentration of 500 000 molecules per cm³. A preliminary hydrolysis test resulted in a dissipation half-life of 0.84 h (approximately 50 min) at 23 ℃. Polyurea is more or less inert and – due to its molecular size – not bioavailable. No biodegradation (0% degradation within 28 days) was observed in a manometric respiratory test performed with domestic, nonadapted activated sludge. As no degradation occurred in the test on ready biodegradability, it is not expected that a significant degradation would occur in a simulation test (water and soil). The test substance is considered as nonbiodegradable in surface water, sediment, and soil. However, biodegradation is considered as irrelevant as primary degradation step anyway because immediate hydrolysis takes place. Due to hydrolysis in water, bioaccumulation of IPDI is not expected. The bioaccumulation potential of the hydrolysis product IPDA is considered to be low (log Kow = 0.99). There are no data on terrestrial bioaccumulation available.

Toxicity evaluation

The toxicological properties of isocyanates are attributed to the –N=C=O group. The consequence is that in the hydrolysis of IPDI predominantly polyurea molecules are formed with liberation of CO2. The polyurea molecules are insoluble in water. Beside these insoluble main hydrolysis products, there are minor amounts of other hydrolysis products having a low to moderate molecular weight and these are more or less water soluble (e.g., isophorone diamine). The local toxic effect of the substance IPDI is not related to metabolic mechanisms, because it is a simple destruction of membranes due to corrosivity of the substance.

Waste Disposal

Disposal is by chemical incineration of IPDIsolution in a combustible solvent.