ANTIMONY PENTAFLUORIDE Property

Melting point:

7 °C(lit.)

Boiling point:

149.4 °C

Density 

2.993 g/mL at 25 °C(lit.)

vapor density 

2.2 (vs air)

vapor pressure 

10 mm Hg ( 25 °C)

Flash point:

149.5°C

storage temp. 

Store below +30°C.

solubility 

liquid sulfur dioxide: slightly soluble(lit.)

form 

Shiny Flakes or Powder

color 

White to off-white

Water Solubility 

reacts vigorously with H2O, becoming hydrolyzed [HAW93] [KIR78]

Sensitive 

Moisture Sensitive

Merck 

13,702

CAS DataBase Reference

7783-70-2(CAS DataBase Reference)

EPA Substance Registry System

Antimony pentafluoride (7783-70-2)

Safety

Hazard Codes 

T,O,C,N,Xn

Risk Statements 

23/24/25-34-51/53-20/22

Safety Statements 

61-45-36/37/39-28-27-26-22

RIDADR 

UN 2923 8/PG 2

WGK Germany 

3

RTECS 

CC5800000

F 

10

Hazard Note 

Corrosive/Oxidising agent

HazardClass 

8

PackingGroup 

II

HS Code 

28261990

Hazardous Substances Data

7783-70-2(Hazardous Substances Data)

Toxicity

LC50 ihl-mus: 270 mg/m3 GISAAA 35(7),25,70

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

ANTIMONY PENTAFLUORIDE Chemical Properties,Usage,Production

Description

Antimony pentafluoride is a noncombustible,oily, colorless liquid with a pungent odor. Molecularweight= 216.75; Boiling point= 143℃; Melting/Freezingpoint=8.3℃; Specific gravity: 2.340 at 30℃; Liquidsurface tension= 5 (estimate) 0.020 N/m at 20℃; Latentheat of vaporization= (estimate) 1.8 3 105 J/kg; Vaporpressure= 1.33 kPa at 25℃. Hazard Identification (basedon NFPA-704 M Rating System): Health 3, Flammability 0,Reactivity 1. Soluble in water.

Chemical Properties

colourless oily liquid

Chemical Properties

Antimony pentafluoride is a noncombustible, oily, colorless liquid with a pungent odor.

Physical properties

Colorless oily liquid; highly viscous; hygroscopic; freezes at 8.3°C; boils at 149.5°C; density 2.99 g/cm³ at 23°C; soluble in excess water (with violent reaction) and glacial acetic acid; also soluble in potassium fluoride.

Uses

HF/SbF5 is an excellent medium for the preparation of alkylidene oxonium salts.1

Uses

In the fluorination of organic Compounds, see the monograph Preparation, Properties and Technology of Fluorine and Organic Fluoro Compounds, C. Slesser, S. R. Schram, Eds. (McGraw-Hill, New York, 1951) 868 pp.

Production Methods

Antimony pentafluoride is prepared by treating antimony pentachloride with excess anhydrous hydrogen fluoride. The antimony pentafluoride is separated from the volatile byproducts by fractional distillation. It can also be prepared by allowing fluorine to react with antimony powder or molten antimony trifluoride. The main use of antimony pentafluoride is as a fluorinating agent.

Preparation

Antimony pentafluoride is prepared by the reaction of antimony pentachloride with anhydrous hydrogen fluoride:
SbCl₅ +5 HF → SbF₅ +5 HCl
It may also be prepared from antimony trifluoride and fluorine, or by treating antimony pentaoxide with aqueous hydrofluoric acid and evaporing water.

Definition

ChEBI: Antimony pentafluoride is an antimony molecular entity and an inorganic fluoride salt. It has a role as a Lewis acid.

General Description

A colorless, oily liquid. Fumes irritate the eyes and mucous membranes. Toxic. Corrosive to metals and tissue. Extremely dangerous to tissue; its burns may be followed by gangrene. Only shipped in cylinders. Under prolonged exposure to heat cylinders may violently rupture and rocket. Used to make other chemicals as well as a catalyst in the manufacture of other chemicals.

Reactivity Profile

ANTIMONY PENTAFLUORIDE is strongly acidic. Reacts vigorously with bases. When heated to decomposition, ANTIMONY PENTAFLUORIDE emits highly toxic fumes of fluorides and metallic antimony. Reacts with ammonia to form a diammoniate.

Hazard

Corrosive to skin and tissue.

Health Hazard

The compound is irritating to eyes, skin, and lungs. Contact with eyes or skin causes severe burns. The compound is extremely toxic with a probable oral lethal dose of 5-50 mg/kg or between 7 drops and one teaspoonful for a 150 pound person (antimony salts).

Fire Hazard

Reacts violently with water, to form poisonous hydrogen fluoride fumes. If confined and wet can cause explosion. May cause fire in contact with combustible material. Hazardous polymerization may not occur.

Safety Profile

A poison by inhalation. A very reactive, corrosive liquid to skin, eyes, mucous membranes. See also FLUORIDES and ANTIMONY COMPOUNDS. Violent reaction with phosphates. When heated to decomposition it emits very toxic fumes of F and Sb.

Potential Exposure

It is used as a catalyst in chemical reactions or as a source of fluorine (fluorinating reagent) in fluorination reactions.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. If victim is conscious, administer water ormilk. Do not induce vomiting. Medical observation isrecommended for 24°48 h after breathing overexposure, aspulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consideradministering a corticosteroid spray.

storage

Color Code—Blue: Health Hazard/Poison: Store ina secure poison location. Prior to working with this chemicalyou should be trained on its proper handling and storage.Antimony pentafluoride must be stored to avoid contactwith phosphorus, phosphates, siliceous, and combustible ororganic materials since violent reactions occur. Store intightly closed containers in a cool, well-ventilated area awayfrom water or moisture and heat. Outside or detached storage is preferred.

Shipping

UN1732 Antimony pentafluoride, Hazard class: 8; Labels: 8-Corrosive material, 6.1-Poisonous materials.

Purification Methods

Purify it by vacuum distillation, preferably in a quartz apparatus, and store it in quartz or aluminum bottles. It is a hygroscopic viscous liquid which reacts violently with H2O and is hydrolysed by alkalis. It is POISONOUS and attacks the skin. [Woolf & Greenwood J Chem Soc 2200 1950, Kwasnik in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 200 1965.]

Incompatibilities

Water and other forms of moisture releases hydrofluoric acid, combustible organic and siliceous materials, phosphorus, and phosphate materials. Attacks glass, ceramic, lead, and metals, including copper in the presence of moisture. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Antimony pentafluoride, if confined and wet may cause explosion. Antimony pentafluoride appears to have oxidizing properties; may cause fire in contact with combustible or organic materials. May react with metals, including lead, releasing flammable hydrogen gas.

Waste Disposal

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.