SUCCINIC ACID PEROXIDE Property

Melting point:

133°C (rough estimate)

Boiling point:

296.47°C (rough estimate)

Density 

1.5040 (rough estimate)

vapor pressure 

23.4hPa at 20℃

refractive index 

1.5800 (estimate)

pka

3.72±0.17(Predicted)

Odor

wh. fine powd., odorless, tart taste

LogP

-0.57 at 25℃

EPA Substance Registry System

Butanoic acid, 4,4'-dioxybis[4-oxo- (123-23-9)

Safety

RIDADR 

3102

HazardClass 

5.2

PackingGroup 

II

Hazardous Substances Data

123-23-9(Hazardous Substances Data)

Toxicity

mouse,LD,intraperitoneal,> 15600ug/kg (15.6mg/kg),"Summary Tables of Biological Tests," National Research Council Chemical-Biological Coordination Center. Vol. 2, Pg. 302, 1950.

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H242Heating may cause a fire

H314Causes severe skin burns and eye damage

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P220Keep/Store away from clothing/…/combustible materials.

P234Keep only in original container.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P310Immediately call a POISON CENTER or doctor/physician.

P321Specific treatment (see … on this label).

P363Wash contaminated clothing before reuse.

P370+P378In case of fire: Use … for extinction.

P403+P235Store in a well-ventilated place. Keep cool.

P405Store locked up.

P411Store at temperatures not exceeding … oC/…oF.

P420Store away from other materials.

P501Dispose of contents/container to..…

SUCCINIC ACID PEROXIDE Chemical Properties,Usage,Production

Chemical Properties

Fine, white powder; odorless. Moderately soluble in water; insoluble in petroleum solvents and benzene.

Uses

Polymerization catalyst, deodorants, antiseptics.

General Description

Fine white odorless powder. Used as a polymerization catalyst.

Air & Water Reactions

Moderately soluble in water.

Reactivity Profile

SUCCINIC ACID PEROXIDE is a strong oxidizing agent. May cause organic materials to ignite. May react explosively with strongly reduced material such as sulfides, nitrides, and hydrides. Mixing with a catalyst (often a transition metal such as cobalt, iron, manganese, nickel, or vanadium) as an impurity can cause rapid decomposition, a buildup of heat, and even an explosion. May explode from heat, shock, friction or contamination. May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect.

Hazard

Fire risk in contact with combustible materials, oxidizing agent. Toxic by ingestion and inhalation, irritant to skin.

Flammability and Explosibility

Not classified

Safety Profile

An irritant. Explodes on contact with flame. When heated to decomposition it emits acrid smoke and irritating fumes. See also PEROXIDES, ORGANIC .