2,2,2-TRIFLUOROETHYL VINYL ETHER
- Product Name
- 2,2,2-TRIFLUOROETHYL VINYL ETHER
- CAS No.
- 406-90-6
- Chemical Name
- 2,2,2-TRIFLUOROETHYL VINYL ETHER
- Synonyms
- Fluroxen;fluoromar;fluroxene;fluorxene;floroxene;fluooxene;fluoroxene;Flurossene;trifluoroethylvinylether;2,2,2-trifluoroethoxyethylene
- CBNumber
- CB5761492
- Molecular Formula
- C4H5F3O
- Formula Weight
- 126.08
- MOL File
- 406-90-6.mol
2,2,2-TRIFLUOROETHYL VINYL ETHER Property
- Boiling point:
- 42-43°C
- Density
- 1,135 g/cm3
- refractive index
- 1.3192
- Flash point:
- -30°C
- storage temp.
- 2-8°C
- form
- A liquid
- Water Solubility
- 4mg/L(temperature not stated)
- Merck
- 14,4202
- BRN
- 1745876
- Exposure limits
- NIOSH: Ceiling 2 ppm(10.3 mg/m3)
- CAS DataBase Reference
- 406-90-6(CAS DataBase Reference)
- EPA Substance Registry System
- Ethene, (2,2,2-trifluoroethoxy)- (406-90-6)
Safety
- Hazard Codes
- F,Xi
- Risk Statements
- 11-41-10
- Safety Statements
- 16-36-39-26
- OEL
- Ceiling: 2 ppm (10.3 mg/m3) [60-minute] [*Note: REL for exposure to waste anesthetic gas.]
- RIDADR
- 1993
- RTECS
- KO4250000
- Hazard Note
- Flammable
- TSCA
- Yes
- HazardClass
- 3
- PackingGroup
- II
- HS Code
- 2909199090
- Toxicity
- mmo-sat 3 pph/2H MUREAV 58,183,78
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Danger
- Hazard statements
-
H225Highly Flammable liquid and vapour
H318Causes serious eye damage
H341Suspected of causing genetic defects
- Precautionary statements
-
P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
P260Do not breathe dust/fume/gas/mist/vapours/spray.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P308+P313IF exposed or concerned: Get medical advice/attention.
N-Bromosuccinimide Price
- Product number
- 2307-3-05
- Product name
- 2,2,2-Trifluoroethyl vinyl ether
- Purity
- 97%
- Packaging
- 100mg
- Price
- $45
- Updated
- 2021/12/16
- Product number
- 2307-3-05
- Product name
- 2,2,2-Trifluoroethyl vinyl ether
- Purity
- 97%
- Packaging
- 250mg
- Price
- $95
- Updated
- 2021/12/16
- Product number
- PC4526
- Product name
- 2,2,2-Trifluoroethylvinylether
- Purity
- 97%
- Packaging
- 100mg
- Price
- $105
- Updated
- 2021/12/16
- Product number
- PC4526
- Product name
- 2,2,2-Trifluoroethylvinylether
- Purity
- 97%
- Packaging
- 250mg
- Price
- $173
- Updated
- 2021/12/16
- Product number
- 2307-3-05
- Product name
- 2,2,2-Trifluoroethyl vinyl ether
- Purity
- 97%
- Packaging
- 1g
- Price
- $325
- Updated
- 2021/12/16
2,2,2-TRIFLUOROETHYL VINYL ETHER Chemical Properties,Usage,Production
Description
Fluroxene, 2,2,2-trifluoro-1- vinyloxyethane, is a colorless liquid with a pungent odor. It is inflammable and, at concentrations above 4 %, explosive in air. Fluroxene (MAC3.4) generally is used in a mixture with oxygen and nitrous oxide. Several cases of liver damage have been observed.
Description
Fluroxene , 2,2,2-trifluoro-1- vinyloxyethane, is a colorless liquid with a pungent odor. It is inflammable and, at concentrations above 4 %, explosive in air. Fluroxene (MAC3.4) generally is used in a mixture with oxygen and nitrous oxide. Several cases of liver damage have been observed.
Originator
Fluoromar, Ohio Medical, US ,1961
Uses
Ca channel blocker, coronary vasodilator
Definition
ChEBI: Fluroxene is an organofluorine compound.
Manufacturing Process
The following process description is taken from US Patent 2,830,007.
270 grams 2,2,2-trifluoroethanol was added slowly to 15 grams of a cooled suspension of potassium metal in 250 ml of ethyl ether with stirring. When all the potassium metal had reacted, the resulting solution was fractionally distilled in order to remove the ethyl ether. The residue was placed in a bomb and the air was removed from the bomb by flushing with acetylene. The bomb was sealed and heated to 150°C. Acetylene was then introduced at 245 to 260 psi and the gas pressure was maintained for a period of 5 hours under mechanical agitation throughout the reaction. At the end of this time, heating was discontinued, the flow of acetylene was shut off and the bomb was allowed to cool to room temperature. The excess pressure in the bomb was reduced to atmospheric pressure by venting any gases through a dry ice cooled trap.
The reaction mixture comprising 2,2,2-trifluoroethyl vinyl ether, 2.2.2trifluoroethanol and potassium 2,2,2-trifluoroethylate was fractionally distilled, whereupon crude 2,2,2-trifluoroethyl vinyl ether was obtained which boiled at 42° to 45°C at 760 mm. More 2,2,2-trifluoroethyl vinyl ether was obtained when the distillation residue was returned to the bomb and reacted with acetylene in the same manner as hereinabove described.
The alkali metal hydroxides, instead of the alkali metals per se, can be employed to produce the alkali metal 2,2,2-trifluoroethanolate. However, this introduces water in the reaction mixture which requires removal prior to vinylation with acetylene. The crude products, on further distillation, yielded 2,2,2-trifluoroethyl vinyl ether having a boiling point of 43.1°C at 759 mm.
Therapeutic Function
Inhalation anesthetic
General Description
Volatile Liquid. Bp: 43°C. Density: 1.14 g cm-3 . Formerly used as an inhalation anesthetic.
Reactivity Profile
2,2,2-TRIFLUOROETHYL VINYL ETHER is non-flammable but combustible. Can form explosive mixtures with air. Reacts with strong oxidizing agents.
Safety Profile
Poison by inhalation. Moderately toxic by intraperitoneal route. An experimental teratogen. Human systemic effects by inhalation: jaundice and liver function tests impaired. Experimental reproductive effects. Mutation data reported. When heated to decomposition it emits toxic fumes of F-. Used as an anesthetic. See also FLUORIDES and ETHERS.
Synthesis
The compound is prepared by catalytic vinylation
of 2,2,2-trifluoroethanol in the presence
of alkali-metal trifluoroethoxide :
2,2,2-TRIFLUOROETHYL VINYL ETHER Preparation Products And Raw materials
Raw materials
Preparation Products
2,2,2-TRIFLUOROETHYL VINYL ETHER Suppliers
- Tel
- --
- Fax
- --
- Country
- Switzerland
- ProdList
- 6896
- Advantage
- 91