4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid
- Product Name
- 4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid
- CAS No.
- 143803-93-4
- Chemical Name
- 4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid
- Synonyms
- 4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid;Pyrazolo[1,5-a]pyridine-3-carboxylic acid, 4-methyl-
- CBNumber
- CB62732295
- Molecular Formula
- C9H8N2O2
- Formula Weight
- 176.17
- MOL File
- 143803-93-4.mol
4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid Property
- Density
- 1.35±0.1 g/cm3(Predicted)
- storage temp.
- Sealed in dry,Room Temperature
- pka
- -0.58±0.41(Predicted)
- Appearance
- White to off-white Solid
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H315Causes skin irritation
H319Causes serious eye irritation
H335May cause respiratory irritation
- Precautionary statements
-
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
N-Bromosuccinimide Price
- Product number
- M335288
- Product name
- 6-Methylpyrazolo[1,5-a]pyridine-3-carboxylicacid
- Packaging
- 2mg
- Price
- $60
- Updated
- 2021/12/16
- Product number
- 2343AQ
- Product name
- 4-Methylpyrazolo[1,5-a]pyridine-3-carboxylicacid
- Packaging
- 500mg
- Price
- $923.6
- Updated
- 2021/12/16
- Product number
- BB-4049566
- Product name
- 4-methylpyrazolo[1,5-a]pyridine-3-carboxylicacid
- Purity
- 95%
- Packaging
- 200μmol
- Price
- $105
- Updated
- 2021/12/16
- Product number
- A151884
- Product name
- 4-Methylpyrazolo[1,5-a]pyridine-3-carboxylicacid
- Purity
- 96%
- Packaging
- 50mg
- Price
- $160
- Updated
- 2021/12/16
- Product number
- 143803934
- Product name
- 4-Methylpyrazolo[1,5-a]pyridine-3-carboxylicacid
- Packaging
- 100mg
- Price
- $196.88
- Updated
- 2021/12/16
4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid Chemical Properties,Usage,Production
Synthesis
55899-17-7
143803-93-4
1. Decarboxylation: The ester compound (1 eq.) is dissolved in 40% aqueous H2SO4 (3 mL) and refluxed for 18 hours. Upon completion of the reaction, the solution was cooled in an ice bath, neutralized to pH 7 with 6 M NaOH and subsequently extracted twice with CH2Cl2. The organic phases were combined, dried with anhydrous Na2SO4 and concentrated under reduced pressure to give the decarboxylated product. 2. Vilsmeier reaction: The decarboxylation product was dissolved in anhydrous DMF (2 mL) under nitrogen protection, cooled to 0 °C, and POCl3 (3 equiv.) was added slowly. The reaction mixture was gradually warmed to room temperature and stirred for 2 hours. The reaction solution was poured into ice water, the pH was adjusted to 10 with 1 M NaOH and stirred for 1 h. The reaction solution was extracted twice with CH2Cl2. The organic phases were combined, washed twice with water, dried over anhydrous Na2SO4 and concentrated under reduced pressure to give the aldehydes. 3. Alternative route to ester hydrolysis: The ester compound (1 eq.) was dissolved in a solution of EtOH (5 mL) in 1 M NaOH (3 eq.) and refluxed for 6 hours. The EtOH is removed under reduced pressure and the residual aqueous phase is acidified with 1 M HCl to pH 1. A solid is precipitated, filtered, washed with water and dried to give the carboxylic acid. 4. Carboxylic acid reduction: Carboxylic acid (1 eq.) was suspended in anhydrous THF (10 mL) under nitrogen protection, CDI (1.5 eq.) was added and stirred for 18 hours. The reaction solution was added dropwise to a solution of NaBH4 (5 eq.) in water (10 mL) and stirred for 30 min. The reaction was quenched with 1 M HCl and stirring was continued for 30 min. The reaction was neutralized with saturated aqueous NaHCO3 and extracted twice with CH2Cl2. The organic phases were combined, dried over anhydrous Na2SO4, concentrated under reduced pressure, and purified by column chromatography (hexane:EtOAc gradient elution) to give the alcohols. 5. Re-oxidation of alcohols: Alcohol compounds (1 eq.) were stirred with MnO2 (10 eq.) in CH2Cl2 (2 mL) at room temperature for 4 days. The reaction mixture was filtered through diatomaceous earth, washed with CH2Cl2 and the filtrate was concentrated under reduced pressure to give the aldehydes.
References
[1] Bioorganic and Medicinal Chemistry, 2012, vol. 20, # 1, p. 69 - 85
4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid Preparation Products And Raw materials
Raw materials
Preparation Products
4-Methylpyrazolo[1,5-a]pyridine-3-carboxylic acid Suppliers
- Tel
- tp@aladdinsci.com
- Country
- United States
- ProdList
- 52923
- Advantage
- 58
- Tel
- --
- Fax
- --
- info@synthonix.com
- Country
- United States
- ProdList
- 6872
- Advantage
- 58
- Tel
- --
- Fax
- --
- sales@combi-blocks.com
- Country
- United States
- ProdList
- 6618
- Advantage
- 69