HALOWAX 1014 Property

Melting point:

127.75°C

Boiling point:

421°C (rough estimate)

Density 

1.7800

refractive index 

1.5691 (estimate)

form 

Waxy yellow-white solid

Exposure limits

TLV-TWA (skin) 0.2 mg/m³ (ACGIH, MSHA, OSHA, and NIOSH); IDLH 2 mg/m³ (NIOSH).

EPA Substance Registry System

Hexachloronaphthalene (1335-87-1)

Safety

OEB

C

OEL

TWA: 0.2 mg/m3 [skin]

Hazardous Substances Data

1335-87-1(Hazardous Substances Data)

IDLA

2 mg/m3

Hazard and Precautionary Statements (GHS)

HALOWAX 1014 Chemical Properties,Usage,Production

Chemical Properties

White solid.

Chemical Properties

The chlorinated naphthalenes in which one or more hydrogen atoms have been replaced by chlorine to form wax-like substances, beginning with monochloronaphthalene and going on to the octachlor derivatives. Their physical states vary from mobile liquids to waxysolids depending on the degree of chlorination; freezing/ melting points of the pure compounds range from 17C for 1-chloronaphthalene to 198C for 1,2,3,4- tetrachloronaphthalene. 1-Chloro-isomer: Hazard identification (based on NFPA-704 M Rating System): Health 2, flammability 1, reactivity 0. 2-Chloro-isomer:

Uses

Hexachloronaphthalene is used in electricwire insulation and as an additive to lubri cants.

Uses

In synthetic wax; in electric wire insulation; in lubricants

General Description

White solid with an aromatic odor.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

HALOWAX 1014 is generally unreactive. May be incompatible with strong oxidizing and reducing agents. May be incompatible with some amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.

Hazard

Toxic by inhalation, strong irritant, absorbed by skin.

Health Hazard

The symptoms of acute toxicity are chlo racne or an acneform of dermatitis, nausea,weakness, confusion, and jaundice. The tar get organs are mainly the liver and skin. Mix tures of penta- and hexachloronaphthaleneat concentrations between 1 and 2 mg/m³have been attributed to fatal cases of yel low atrophy of the liver (Elkins 1959). TheLD50 values for this compound are notreported.

Fire Hazard

Literature sources indicate that HALOWAX 1014 is nonflammable.

Potential Exposure

Industrial exposure from individual chlorinated naphthalenes is rarely encountered; rather it usually occurs from mixtures of two or more Chlorinated naphthalenes. Due to their stability, thermoplasticity, and nonflammability, these compounds enjoy wide industrial application. These compounds are used in the production of electric condensers; in the insulation of electric cables and wires; as additives to extreme pressure lubricants; as supports for storage batteries; and as a coating in foundry use. octachloro-: Used as a fireproof and waterproof additive and lubricant additive. Pentachloro-: Used in electric wire insulation and in additives to special lubricants. tetrachloro-: Used in electrical insulating materials and as an additive in cutting oils. trichloro-: Used in lubricants and in the manufacture of insulation for electrical wire. Because of the possible potentiation of the toxicity of higher Chlorinated naphthalenes by ethanol and carbon tetrachloride, individuals who ingest enough alcohol to result in liver dysfunction would be a special group at risk. Individuals, e.g., analytical and synthetic chemists, mechanics and cleaners, who are routinely exposed to carbon tetrachloride or other hepatotoxic chemicals would also be at a greater risk than a population without such exposure. Individuals involved in the manufacture, utilization, or disposal of polychlorinated naphthalenes would be expected to have higher levels of exposure than the general population.

Shipping

UN3082 Environmentally hazardous substances, liquid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.

Incompatibilities

All are incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Keep away from heat. Penta- is also incompatible with acids, alkalis.

Waste Disposal

High-temperature incineration with flue gas scrubbing. Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced.