4-Methyl-2-pentanol Property

Melting point:

-90 °C

Boiling point:

134-135 °C(lit.)

Density 

0.802 g/mL at 25 °C(lit.)

vapor density 

3.5 (vs air)

vapor pressure 

3.7 mm Hg ( 20 °C)

refractive index 

n20/D 1.415(lit.)

Flash point:

107 °F

storage temp. 

Store below +30°C.

solubility 

16.4g/l

form 

Liquid

pka

15.31±0.20(Predicted)

color 

Clear colorless

Odor

Sharp; mild and nonresidual.

Odor Type

pungent

explosive limit

1-5.5%(V)

Water Solubility 

2 g/100 mL

BRN 

1098268

Exposure limits

ACGIH: TWA 25 ppm; STEL 40 ppm (Skin)
OSHA: TWA 25 ppm(100 mg/m3)
NIOSH: IDLH 400 ppm; TWA 25 ppm(100 mg/m3); STEL 40 ppm(165 mg/m3)

Stability:

Stable. Flammable. Incompatible with oxidizing agents, acids, acid chlorides.

LogP

1.57 at 20℃

CAS DataBase Reference

108-11-2(CAS DataBase Reference)

NIST Chemistry Reference

2-Pentanol, 4-methyl-(108-11-2)

EPA Substance Registry System

4-Methyl-2-pentanol (108-11-2)

Safety

Hazard Codes 

Xi

Risk Statements 

10-37-36/37/38

Safety Statements 

24/25-26

RIDADR 

UN 2282 3/PG 3

WGK Germany 

1

RTECS 

SA7350000

Autoignition Temperature

305 °C

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29051900

Hazardous Substances Data

108-11-2(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: 2590 mg/kg LD50 dermal Rabbit 2884 mg/kg

IDLA

400 ppm

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H226Flammable liquid and vapour

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P240Ground/bond container and receiving equipment.

P241Use explosion-proof electrical/ventilating/lighting/…/equipment.

P242Use only non-sparking tools.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

4-Methyl-2-pentanol Chemical Properties,Usage,Production

Description

MIBC is a colorless liquid with a mild odor.The odor threshold is 0.52 ppm. Molecularweight 5 102.20; Specific gravity (H2O:1) 5 0.81; Boilingpoint 5 132.8℃; Freezing/Melting point 5 2 90℃; Vaporpressure 5 3 mmHg at 20℃; Flash point = 41℃. Theexplosive limits are LEL 5 1.0%; UEL 5 5.5%. HazardIdentification (based on NFPA-704 M Rating System):Health 2, Flammability 2, Reactivity 0. Slightly soluble inwater; solubility 5 2%.

Chemical Properties

colourless liquid

Chemical Properties

MIBC is a colorless liquid with a mild odor. The odor threshold is 0.52 ppm.

Uses

Solvent for dyestuffs, oils, gums, resins, waxes, nitrocellulose, and ethylcellulose; organic synthesis; froth flotation; brake fluids.

Uses

Solvent; organic syntheses; brake fluids

Uses

(^+)-4-Methyl-2-pentanol is employed as a solvent in organic synthesis, dyes and stains, natural resins and waxes. It is an additive to surface coatings. It finds applications in the manufacture of lube oil additives, zinc dialkyldithiophosphate, brake fluids. It is the precursor to some plasticizers and frother in mineral flotation. It acts as a corrosion inhibitor and also utilized in the characterization of volatile fraction of mono varietal wines and tar sand mining processes.

Production Methods

Methyl isobutyl carbinol is prepared commercially as a byproduct of the synthesis of methyl isobutyl ketone.

Synthesis Reference(s)

Journal of the American Chemical Society, 82, p. 3222, 1960 DOI: 10.1021/ja01497a062
Tetrahedron Letters, 25, p. 5897, 1984 DOI: 10.1016/S0040-4039(01)81714-7

General Description

A clear colorless liquid. Flash point 120°F. Less dense than water. Vapors heavier than air.

Air & Water Reactions

Flammable. Soluble in water.

Reactivity Profile

4-Methyl-2-pentanol is an alcohol. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert them to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides. 4-Methyl-2-pentanol is incompatible with strong oxidizers .

Hazard

Moderate fire risk, explosive limits in air 1– 5.5%. Eye and upper respiratory tract irritant, and central nervous system impairment.

Health Hazard

Vapor irritates eyes and nose; may cause anesthesia. Prolonged contact with liquid causes irritation and cracking of skin; also irritates eyes.

Fire Hazard

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

Flammability and Explosibility

Flammable

Chemical Reactivity

Reactivity with Water: No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Safety Profile

Moderately toxic by ingestion, skin contact, and intraperitoneal routes. Mildly toxic by inhalation. A skin and severe eye irritant. Inhalation of high concentrations can cause anesthesia. Flammable liquid when exposed to heat or flame; can react with oxidizing materials. A moderate explosion hazard when exposed to heat or flame. To fight fire, use alcohol foam. When heated to decomposition it emits acrid smoke and fumes.

Potential Exposure

MIBC is used as a solvent; in the formulation of brake fluids; as an intermediate in organic synthesis.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.

storage

Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Methylamyl alcohol must be stored to avoid contact with peroxides, chlorates, perchlorates, permanganates, and nitratessince violent reactions occur. Store in tightly closed containers in a cool, well-ventilated area away from heat.Sources of ignition, such as smoking and open flames, areprohibited where methyl amyl alcohol is used, handled, orstored in a manner that could create a potential fire orexplosion hazard.

Shipping

UN2053Methyl isobutyl carbinol, Hazard Class: 3; Labels: 3-Flammable liquid

Purification Methods

Wash the 2-pentanol with aqueous NaHCO3, dry and distil it. Purify it further by converting it to the phthalate ester by adding 120mL of dry pyridine and 67g of phthalic anhydride per mole of alcohol, purifying the ester and steam distilling it in the presence of NaOH. The distillate is extracted with ether, and the extract is dried and fractionally distilled. [Levine & Walti J Biol Chem 94 367 1931, Beilstein 1 IV 1717.]

Incompatibilities

Vapor may form explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong acids, peroxysulfuric acid, strong bases, caustics, aliphatic amines; isocyanates. Contact with alkali metals produces hydrogen gas. Permissibl

Waste Disposal

Incineration; other, more flammable solvent may be added.