1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR
- Product Name
- 1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR
- CAS No.
- 174899-83-3
- Chemical Name
- 1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR
- Synonyms
- BMIMNTF2;1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide;BMIM TFSI;1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl);1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide in stock Factory;SKL1353;Basionics? HP 02;Basionics(R) HP 02;BMIIm, BMIM TFSI;1-Butyl-3-methylimidazolium
- CBNumber
- CB7497748
- Molecular Formula
- C8H15N2.C2F6NO4S2
- Formula Weight
- 419.366
- MOL File
- 174899-83-3.mol
1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR Property
- Melting point:
- 1℃
- Density
- 1.44 g/cm3
- refractive index
- n20/D 1.428
- Flash point:
- >200 ºC
- storage temp.
- Store below +30°C.
- Water Solubility
- Insoluble in water
- form
- liquid
- color
- Colorless to Light orange to Yellow
- PH
- 7 (H2O, 20℃)Aqueous solution
- InChI
- InChI=1S/C8H15N2.C2F6NO4S2/c1-3-4-5-10-7-6-9(2)8-10;3-1(4,5)14(10,11)9-15(12,13)2(6,7)8/h6-8H,3-5H2,1-2H3;/q+1;-1
- InChIKey
- INDFXCHYORWHLQ-UHFFFAOYSA-N
- SMILES
- S(=O)(=O)(C(F)(F)F)[N-]S(=O)(=O)C(F)(F)F.[N+]1(C)C=CN(CCCC)C=1
- ECW
- 4,62 V
Safety
- Hazard Codes
- T,N
- Risk Statements
- 36/37/38-51/53-48/22-34-24/25
- Safety Statements
- 26-36-61-45-36/37/39
- RIDADR
- UN 2922
- WGK Germany
- 3
- F
- 10-21
- HazardClass
- 8, 6.1
- HS Code
- 29350090
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Danger
- Hazard statements
-
H314Causes severe skin burns and eye damage
H373May cause damage to organs through prolonged or repeated exposure
H411Toxic to aquatic life with long lasting effects
- Precautionary statements
-
P260Do not breathe dust/fume/gas/mist/vapours/spray.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
N-Bromosuccinimide Price
- Product number
- 77896
- Product name
- 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
- Purity
- ≥98.0% (HPLC)
- Packaging
- 1g
- Price
- $124.6
- Updated
- 2025/07/31
- Product number
- 900802
- Product name
- 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
- Purity
- ≥99%, H2O <500?ppm
- Packaging
- 25G
- Price
- $787
- Updated
- 2025/07/31
- Product number
- 77896
- Product name
- 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
- Purity
- ≥98.0% (HPLC)
- Packaging
- 5G
- Price
- $189
- Updated
- 2025/07/31
- Product number
- 901041
- Product name
- 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide Solarpur®
- Packaging
- 25G
- Price
- $435
- Updated
- 2022/05/15
- Product number
- B2477
- Product name
- 1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)imide
- Purity
- >98.0%(HPLC)(T)
- Packaging
- 5g
- Price
- $158
- Updated
- 2025/07/31
1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR Chemical Properties,Usage,Production
Conductivity
3.41 mS/cm
Uses
Ionic liquids (ILs) are molten salts with melting points lower than 100 °C. They usually consist of pair of organic cation and anion. ILs exhibit unique properties such as non-volatility, high thermal stability, and high ionic conductivity and find applications as electrolytes in lithium/sodium ion batteries and dye-sensitized solar cells. They are also used as media for synthesis of conducting polymers and intercalation electrode materials.
Uses
Solarpur? electrolyte components for DSSC applications meet the highest purity standards regarding water and other impurities required for this technology.
Uses
1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide is a hydrophobic ionic liquid that can enhance the activity of N,N,N′,N′-tetra(n-octyl)diglycolamide (TODGA) extractant in the extraction of uranium(VI) from an aqueous nitric acid media.
General Description
1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide is a room temperature ionic liquid (RTIL). The solubility of alkane gases are less than the alkene gas in this IL. Its ability to solubilize CO2 is more when compared to 1-butyl-3-methylimidazolium dicyanamide.
Synthesis
4316-42-1
77-78-1
174899-83-3
The general procedure for the synthesis of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide from N-butylimidazole and dimethyl sulfate is as follows: 1. 620.5 g (5 mol) of N-butylimidazole was added to a 5 liter reaction vessel, followed by the addition of 630.5 g (5 mol) of dimethyl sulfate in batches. 2. the mixture was stirred for 15 minutes to ensure adequate reaction. 3. 1435.3 g (5 mol) of lithium bis(trifluoromethanesulfonyl)imide dissolved in 2 liters of water was added to the reaction mixture, and the formation of a second liquid phase of the product was immediately observed. 4. Phase separation was carried out and the organic phase was collected and dried under high vacuum (HV) at 60 °C to afford 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide in 98% yield. 5. To detect residual chlorides, about 1 g of the product was dissolved in 5 ml of water, acidified with 2 drops of concentrated nitric acid and then 3-4 drops of silver nitrate solution were added. No precipitation of silver chloride was observed indicating that no halide ions remained in the product. 6. 6. The 1H-NMR (300 MHz, acetone-d3) data of the product were as follows: 0.95 (3H, t, J=9.2 Hz, Hh); 1.33-1.39 (2H, m, Hg); 1.90-2.00 (2H, m, Hf); 4.07 (3H, s, Hb); 4.37 (2H, t, J=9.3 Hz, He); 7.71 (1H, t, J=9.3 Hz, Hb); 7.76 (1H, s, Hb); 4.37 (2H, t, J=9.3 Hz, He); and 7.71 (1H, s, Hb). ,7.76 (1H, s, Hc, d); 9.02 (1H, s, Ha) ppm.
References
[1] Patent: EP1182196, 2002, A1. Location in patent: Page 14, 15
1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR Preparation Products And Raw materials
Raw materials
Preparation Products
1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR Suppliers
- Tel
- 0539-7578168 13791585810
- 46439760@qq.com
- Country
- China
- ProdList
- 55
- Advantage
- 58
- Tel
- 025-85205967 13951876367
- Fax
- 025-85205967
- shengsaichem@163.com
- Country
- China
- ProdList
- 818
- Advantage
- 58
- Tel
- 13588285484
- dinggf@landeet.com
- Country
- China
- ProdList
- 92
- Advantage
- 58
- Tel
- 0917-18691729 18691729963
- 2553382659@qq.com
- Country
- China
- ProdList
- 4739
- Advantage
- 58
- Tel
- 15318857512
- 1912317598@qq.com
- Country
- China
- ProdList
- 44
- Advantage
- 58
- Tel
- 0531-84319199 18660131512
- 1417934650@qq.com
- Country
- China
- ProdList
- 48
- Advantage
- 58
- Tel
- 17260411521
- 993163703@qq.com
- Country
- China
- ProdList
- 343
- Advantage
- 58
- Tel
- 13356065290 13356065290
- huajiahainan@yeah.net
- Country
- China
- ProdList
- 150
- Advantage
- 58
- Tel
- 18210857532; 18210857532
- Fax
- 86-10-82849933
- jkinfo@jkchemical.com
- Country
- China
- ProdList
- 96815
- Advantage
- 76
- Tel
- 4006356688 18621169109
- Fax
- 86-21-61259102
- market03@meryer.com
- Country
- China
- ProdList
- 40228
- Advantage
- 62
View Lastest Price from 1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR manufacturers
- Product
- 1-Butyl-3-Methylimidazolium Bis(Trifluoromesulfonyl)imide 174899-83-3
- Price
- US $18.00-48.00/KG
- Min. Order
- 0.01KG
- Purity
- 99%
- Supply Ability
- g-kg-tons, free sample is available
- Release date
- 2025-06-19
- Product
- 1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR 174899-83-3
- Price
- US $0.00/KG
- Min. Order
- 1KG
- Purity
- 99%
- Supply Ability
- 10 mt
- Release date
- 2024-11-12
- Product
- 1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOR 174899-83-3
- Price
- US $65.00/kg
- Min. Order
- 1kg
- Purity
- 99%
- Supply Ability
- 5000kg/week
- Release date
- 2024-06-05