POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
- Product Name
- POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
- CAS No.
- 29690-82-2
- Chemical Name
- POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
- Synonyms
- Epichlorohydrin,o-cresol,formaldehydepolymer;CNE-202;Ortho-Cresol Novolac Epoxy Resins;POLY((O-CRESYL GLYCIDYL ETHER)-CO- &;o-Cresol,formaldehyde,epichlorohydrinpolymer;cresyl glycidyl ether/ formaldehyde copolymer;o-Cresol-epichlorhydrin-formaldehyde copolymer;POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE];2-(chloromethyl)oxirane,formaldehyde,2-methylphenol;o-Cresol,1-chloro-2,3-epoxypropane,formaldehydepolymer
- CBNumber
- CB8121851
- Molecular Formula
- C33H42O9X2
- Formula Weight
- 582.68
- MOL File
- 29690-82-2.mol
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Property
- Melting point:
- 70-75 °C(lit.)
- Density
- 1.12 g/mL at 25 °C(lit.)
- Flash point:
- >230 °F
- EPA Substance Registry System
- Epichlorohydrin, o-cresol, formaldehyde polymer (29690-82-2)
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H315Causes skin irritation
H319Causes serious eye irritation
H335May cause respiratory irritation
- Precautionary statements
-
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P264Wash hands thoroughly after handling.
P264Wash skin thouroughly after handling.
P271Use only outdoors or in a well-ventilated area.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352IF ON SKIN: wash with plenty of soap and water.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
N-Bromosuccinimide Price
- Product number
- 405515
- Product name
- Poly[(o-cresyl glycidyl ether)-co-formaldehyde]
- Purity
- average Mn ~870
- Packaging
- 100g
- Price
- $63
- Updated
- 2024/03/01
- Product number
- POL0001372
- Product name
- POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
- Purity
- 95.00%
- Packaging
- 5MG
- Price
- $496.66
- Updated
- 2021/12/16
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Chemical Properties,Usage,Production
Chemical Properties
Hazardous polymerization can occur with aliphatic amines in quantities greater than 1 lb.
Uses
The epoxy novolac resins are
used and cured in ways similar to the resins based on the
diglycidyl ether of bisphenol A. These resins differ from
bisphenol A epoxy resins in that whereas a bisphenol A
polymeric chain can contain a maximum of two epoxide
group regardless of chain length, cresolic and phenolic
novolacs can contain an epoxide group for each phenol or
cresol molecule incorporated in the chain.
Because of their high functionality, epoxy novolac resins,
when cured, produce tightly cross-linked systems with improved high-temperature performance, chemical resistance,
and adhesion over the resins based on the diglycidyl
ether of bisphenol A. The thermal stability of epoxy novolac
resins has made them useful for structural and electrical
laminates and as coatings and castings for elevated temperature
service. Owing to the chemical resistance of these resins,
they are used for lining storage tanks, pumps, and other
process equipment as well as for corrosion-resistant coatings.
Uses
For high temperature adhesives, coatings, electrical and laminating products.
Production Methods
The term novolac refers to the reaction products of phenolic compounds and formaldehyde. Glycidation of the phenolic hydroxyl groups by epichlorohydrin under conditions similar to those used for forming the diglycidyl ether of bisphenol A produces the corresponding epoxy novolac resins. The average n in the above formula varies from 0.2 to 1.8, depending on the ultimate use of the resin.
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Preparation Products And Raw materials
Raw materials
Preparation Products
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Suppliers
- Tel
- Fax
- -
- xg01_gj@163.com
- Country
- China
- ProdList
- 9484
- Advantage
- 50
- Tel
- 021-61415566 800-8193336
- orderCN@merckgroup.com
- Country
- China
- ProdList
- 51456
- Advantage
- 80
- Tel
- +8618530059196
- sale04@alfachem.cn
- Country
- China
- ProdList
- 13502
- Advantage
- 58
- Tel
- 18871490254
- Fax
- 027-59599243
- linda@hubeijusheng.com
- Country
- CHINA
- ProdList
- 28172
- Advantage
- 58
- Tel
- +8618523575427
- sales@conier.com
- Country
- China
- ProdList
- 49374
- Advantage
- 58
- Tel
- 021-58432009 400-005-6266
- Fax
- 021-58436166
- marketing@energy-chemical.com
- Country
- China
- ProdList
- 44918
- Advantage
- 58
- Tel
- 027-027-59322506 18071128681
- Fax
- 027-59322506
- 1438082200@qq.com
- Country
- China
- ProdList
- 9976
- Advantage
- 58
- Tel
- 0371-0371-53399770 18037166334
- 2853031800@qq.com
- Country
- China
- ProdList
- 3147
- Advantage
- 58
- Tel
- 021-50706066 15221275939
- shenlinxing@macklin.cn
- Country
- China
- ProdList
- 29794
- Advantage
- 58
- Tel
- 13003551299 13003551299
- 2369399482@qq.com
- Country
- China
- ProdList
- 7566
- Advantage
- 58