bis(4-(trifluoroMethyl)phenyl)phosphine oxide
- Product Name
- bis(4-(trifluoroMethyl)phenyl)phosphine oxide
- CAS No.
- 15929-43-8
- Chemical Name
- bis(4-(trifluoroMethyl)phenyl)phosphine oxide
- Synonyms
- bis(4-(trifluoroMethyl)phenyl)phosphine oxide;oxo-bis[4-(trifluoromethyl)phenyl]phosphanium;Phosphine oxide, bis[4-(trifluoromethyl)phenyl]-
- CBNumber
- CB82727620
- Molecular Formula
- C14H9F6OP
- Formula Weight
- 338.18
- MOL File
- 15929-43-8.mol
bis(4-(trifluoroMethyl)phenyl)phosphine oxide Property
- Melting point:
- 67-69 °C
- Boiling point:
- 336.4±52.0 °C(Predicted)
- storage temp.
- under inert gas (nitrogen or Argon) at 2-8°C
- Appearance
- Light yellow to yellow Solid
- InChI
- InChI=1S/C14H9F6OP/c15-13(16,17)9-1-5-11(6-2-9)22(21)12-7-3-10(4-8-12)14(18,19)20/h1-8,22H
- InChIKey
- QBRQTQSIWMMJGR-UHFFFAOYSA-N
- SMILES
- P(=O)(C1=CC=C(C(F)(F)F)C=C1)C1=CC=C(C(F)(F)F)C=C1
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H302Harmful if swallowed
H315Causes skin irritation
H320Causes eye irritation
H335May cause respiratory irritation
- Precautionary statements
-
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.
P302+P352IF ON SKIN: wash with plenty of soap and water.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
N-Bromosuccinimide Price
- Product number
- HCH0122576
- Product name
- BIS(4-(TRIFLUOROMETHYL)PHENYL)PHOSPHINE OXIDE
- Purity
- 95.00%
- Packaging
- 5MG
- Price
- $505.66
- Updated
- 2021/12/16
- Product number
- CD51001894
- Product name
- Bis(4-(trifluoromethyl)phenyl)phosphineoxide
- Purity
- 97%
- Packaging
- 1g
- Price
- $762
- Updated
- 2021/12/16
- Product number
- 61-10864
- Product name
- Bis(4-(trifluoromethyl)phenyl)phosphineoxide
- Purity
- 95-98%
- Packaging
- 1g
- Price
- $765
- Updated
- 2021/12/16
- Product number
- 15929438
- Product name
- Bis(4-(trifluoromethyl)phenyl)phosphineoxide
- Packaging
- 1g
- Price
- $780.16
- Updated
- 2021/12/16
- Product number
- A161531
- Product name
- Bis(4-(trifluoromethyl)phenyl)phosphineoxide
- Purity
- 97%
- Packaging
- 5g
- Price
- $1254
- Updated
- 2021/12/16
bis(4-(trifluoroMethyl)phenyl)phosphine oxide Chemical Properties,Usage,Production
Synthesis
402-51-7
762-04-9
15929-43-8
The general procedure for the synthesis of bis(4-(trifluoromethyl)phenyl)phosphine oxide by Hays' method using 4-trifluoromethylphenylmagnesium bromide and diethyl phosphite is as follows: 1. in a 100-mL round-bottomed flask fitted with a charging funnel, an evacuation/argon filling operation was performed followed by addition of 33 mL of a 1 M 4-(trifluoromethyl)phenylmagnesium bromide/THF solution (33 mmol, 3.3 eq.), and the solution was cooled to 0°C. 2. 1.38 g of diethyl phosphite (10 mmol, 1.0 eq.) dissolved in 10 mL of THF was added dropwise over 10 min under argon protection. 3. the reaction mixture was kept at 0 °C for 10 min, after which the ice bath was removed and the mixture was allowed to warm up to room temperature and stirred for 2 hours. 4. The reaction mixture was again cooled to 0 °C and 25 mL of 0.1 N HCl (deoxygenated water) was added dropwise over 20 minutes, followed by 25 mL of methyl tertiary butyl ether (MTBE) and stirred thoroughly for 5 minutes. 5. The upper organic phase was separated and retained. To the lower aqueous phase an additional 20 mL of 1 N HCl (deoxygenated water) was added and extracted with dichloromethane (2 x 30 mL). 6. All organic phases were combined and filtered through a diatomaceous earth pad, the pad was washed with dichloromethane and subsequently dried with magnesium sulfate (MgSO4). 7. The solvent was removed under pressure to give the crude product. 8. The crude product was purified by silica gel column chromatography using 2% methanol/dichloromethane as eluent and finally recrystallized from hot ethyl acetate (EtOAc) to give 2.41 g of the target product (92% yield) as a colorless solid. Product characterization: colorless solid; yield = 92%; 1H NMR (400 MHz, CDCl3) δ: 8.01 (d, 1JHP = 473 Hz, 1H), 7.60 (dd, J = 13.8, 8.2 Hz, 4H), 6.97 (dd, J = 7.8, 2.4 Hz, 4H), 3.83 (s, 6H); 31P NMR (162 MHz, CDCl3) δ: 21.0.
References
[1] Research on Chemical Intermediates, 2018, vol. 44, # 7, p. 4547 - 4562
bis(4-(trifluoroMethyl)phenyl)phosphine oxide Preparation Products And Raw materials
Raw materials
Preparation Products
bis(4-(trifluoroMethyl)phenyl)phosphine oxide Suppliers
- Tel
- 18600392407 18668996177
- linkingpharm@126.com
- Country
- China
- ProdList
- 25
- Advantage
- 58
- Tel
- 22-58627059 13920586291
- Fax
- 022-58620305
- zdcomcon@126.com
- Country
- China
- ProdList
- 3829
- Advantage
- 50
- Tel
- 400-164-7117 13681763483
- Fax
- +86-21-61629029
- product02@bidepharm.com
- Country
- China
- ProdList
- 42446
- Advantage
- 60
- Tel
- 0512-62872180 18994314770
- Fax
- +86 512 62872181
- sales@sunatech.com
- Country
- China
- ProdList
- 1177
- Advantage
- 58
- Tel
- 021-5068 3667/17749785980/1029026415; 17749785980
- Fax
- 021-50683667
- 1029026415@qq.com
- Country
- China
- ProdList
- 3397
- Advantage
- 58
- Tel
- 400-685-9117
- Fax
- 021-51816740
- market@bepharm.com
- Country
- China
- ProdList
- 15081
- Advantage
- 60
- Tel
- 571-89925085
- Fax
- 0086-571-89925065
- sales@amadischem.com
- Country
- China
- ProdList
- 131957
- Advantage
- 58
- Tel
- 18001959627(微信同号) 18001959627
- jjlchem2@163.com
- Country
- China
- ProdList
- 9981
- Advantage
- 58
- Tel
- 021-021-52271985 17721149837
- Fax
- +86 (21) 52271987
- sales@9dingchem.com
- Country
- China
- ProdList
- 19800
- Advantage
- 60
- Tel
- 025-58859352 18068836627
- Fax
- 02557626880
- sales01@aikonchem.com
- Country
- China
- ProdList
- 16027
- Advantage
- 58