SODIUM ARSENATE Property

Melting point:

86℃ [HAW93]

Boiling point:

decomp at 150°C

Density 

1.7539 [HAW93]

solubility 

soluble in H2O; slightly soluble in ethanol; insoluble in ethyl ether

color 

Colorless white powder or solid, effloresces

Water Solubility 

g/100g solution H2O: 5.59 (0.1°C), 29.33 (25°C), 66.5 (98.5°C); solid phase, Na2HAsO4 ·12H2O (0.1°C), Na2HAsO4 ·7H2O (25°C), Na2HAsO4(98.5°C) [KRU93]; slightly soluble alcohol [MER06]

EPA Substance Registry System

Arsenic acid (H3AsO4), disodium salt (7778-43-0)

Safety

RIDADR 

1685

HazardClass 

6.1(a)

PackingGroup 

II

HS Code 

28429090

Hazardous Substances Data

7778-43-0(Hazardous Substances Data)

Toxicity

cyt-hmn:leu 7200 mmol/L MUREAV 88,73,81

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H301Toxic if swalloed

H331Toxic if inhaled

H350May cause cancer

H400Very toxic to aquatic life

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P271Use only outdoors or in a well-ventilated area.

P273Avoid release to the environment.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P311Call a POISON CENTER or doctor/physician.

P321Specific treatment (see … on this label).

P330Rinse mouth.

P391Collect spillage. Hazardous to the aquatic environment

P403+P233Store in a well-ventilated place. Keep container tightly closed.

P405Store locked up.

P501Dispose of contents/container to..…

SODIUM ARSENATE Chemical Properties,Usage,Production

Chemical Properties

Arsenic acid disodium salt is not combustible. It emits irritating or toxic fumes or gases in a fi re.

Chemical Properties

Sodium arsenate is currently registered for use as ant bait. These baits are used in approximately 1% of US homes. Sodium arsenate is a pentavalent form of inorganic arsenic. It is a heptahydrate that normally exists as colorless crystals with no discernible odor. Sodium arsenate contains 24% arsenic.

Chemical Properties

White crystalline, odorless solids.

Chemical Properties

Clear, colorless crystals; mild alkaline taste. Soluble in water; slightly soluble in alcohol and glycerol; insoluble in ether.

Uses

Mordant and assist in dyeing and printing, other arsenates, germicide.

Preparation

Sodium arsenate is obtained by roasting a mixture of arsenic oxide with sodium carbon ate and sodium nitrate in the presence of air.In addition, this compound can be easily obtained by calcining sodium arsenate(III) in the pres ence of air.

Definition

ChEBI: An inorganic sodium salt composed from sodium cations and arsenate dianions in a 2:1 ratio.

Hazard

Toxic by ingestion and inhalation.

Health Hazard

Exposures to arsenic acid disodium salt cause adverse health effects. The symptoms of poisoning include, but are not limited to, cough, headache, sore throat, weakness, respiratory distress, labored breathing, irritation to the eyes, and skin, dermatitis, mucous membranes, the respiratory tract, and pigmentation disorders. Repeated or prolonged contact with arsenic acid disodium salt causes cardiovascular disorders affects the nervous system, neuropathy, and kidneys, resulting in severe gastroenteritis, loss of fl uids and electrolytes, kidney impairment, collapse, shock, and death.

Health Hazard

Inorganic arsenical compounds have been classifi ed as Class A oncogenes, demonstrating positive oncogenic effects based on suffi cient human epidemiological evidence. Inorganic arsenicals are known to be acutely toxic. The symptoms that follow oral exposure include severe gastrointestinal damage resulting in vomiting and diarrhea, and general vascular collapse leading to shock, coma, and death. Muscular cramps, facial edema, and cardiovascular reactions are also known to occur following oral exposure to arsenic.
On ingestion, organic arsenic compounds cause severe health effects, including burning lips, throat constriction, abdominal pain, dysphagia, nausea, vomiting, diarrhea, convulsions, coma, and death. Irritation of the respiratory tract, skin, and eyes may result from inhalation exposures. Chronic exposure to organic arsenic compounds may result in dermatitis, anemia, leukocytopenia, or the effects associated with several forms of cancer.

Contact allergens

Arsenic salts are sensitizers, but most often irritants. They are used in copper or gold extraction, glass, feeds, weedkillers, insecticides, and ceramics. A recent case was reported in a crystal factory worker with positive patch tests to sodium arsenate.

Safety Profile

Confirmed human carcinogen. Poison by intraperitoneal route. Human mutation data reported. When heated to decomposition it emits toxic fumes of arsenic. See ARSENIC COMPOUNDS.

Potential Exposure

Sodium arsenate is used in dyeing and printing; making other arsenates; as a germicide; in dyeing with turkey-red oil.

storage

It is important to keep stored organic arsenic compounds in a cool, dry, well-ventilated area in tightly sealed containers and with proper labels and identifi cation. The storage containers of organic arsenic compounds should be protected from physical damage and stored separately from oxidizers such as perchlorates, peroxides, permanganates, chlorates, or nitrates, and strong acids such as hydrochloric, sulfuric, or nitric acid. Further, specifi c organic arsenic compounds must have separate storage requirements, which should be evaluated prior to storage.

Precautions

During handling and use of arsenic compounds, workers should use appropriate personal protective clothing and equipment. Users/workers must be careful during use, and maintain effective measures to prevent skin contact with organic arsenic compounds. The selection of the appropriate personal protective equipment (PPE), such as gloves, sleeves, and encapsulating suits should be based on the extent of the worker’s potential exposure to organic arsenic compounds. The users and the management should periodically evaluate and determine the effectiveness of the chemical-resistant clothing in preventing dermal contact and ensuring users’ safety.