CIS-1,2-DICHLOROETHYLENE Property

Melting point:

-80 °C (lit.)

Boiling point:

60 °C (lit.)

Density 

1.284 g/mL at 25 °C (lit.)

refractive index 

n20/D 1.449(lit.)

Flash point:

43 °F

storage temp. 

2-8°C

solubility 

soluble in Chloroform

form 

Liquid

color 

Clear colorless

Water Solubility 

3.5g/L(25 ºC)

Merck 

14,92

BRN 

1071208

Dielectric constant

9.1999999999999993

Stability:

Volatile

CAS DataBase Reference

156-59-2(CAS DataBase Reference)

EPA Substance Registry System

cis-1,2-Dichloroethylene (156-59-2)

Safety

Hazard Codes 

F,Xn,T

Risk Statements 

11-20-52/53-39/23/24/25-23/24/25

Safety Statements 

7-16-29-61-45-36/37

OEB

A

OEL

TWA: 200.0 ppm; 790.0 mg/m3

RIDADR 

UN 1150 3/PG 2

WGK Germany 

2

RTECS 

KV9420000

F 

1-8-10

HazardClass 

3.1

PackingGroup 

II

HS Code 

29032990

Hazardous Substances Data

156-59-2(Hazardous Substances Data)

Toxicity

cat,LCLo,inhalation,20gm/m3/6H (20000mg/m3),BEHAVIORAL: GENERAL ANESTHETICBEHAVIORAL: CONVULSIONS OR EFFECT ON SEIZURE THRESHOLD,Archiv fuer Hygiene und Bakteriologie. Vol. 116, Pg. 131, 1936.

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H315Causes skin irritation

H412Harmful to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P273Avoid release to the environment.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

CIS-1,2-DICHLOROETHYLENE Chemical Properties,Usage,Production

Chemical Properties

cis-1,2-Dichloroethylene (cis-DCE, cis-1,2-C2H2Cl2, CAS registry No. 156-59-2) is a colorless liquid. Its melting point is −80 oC. It is soluble in alcohol, ether, and most other organic solvents. The reaction of cis-DCE and potassium hydroxide can produce chloroacetylene, which is explosive and spontaneously flammable in air. It is highly toxic. So, it is incompatible with moist air or water, bases. When heated to decomposition, it yields hydrogen chloride, carbon monoxide, carbon dioxide.

Uses

cis-DCE and other chloroethenes like tetrachloroethene (PCE), trichloroethene (TCE), and vinyl chloride (VC) are extensively used as solvents in different dry cleaning and metal degreasing industries.

Chemical Properties

clear colorless liquid

Chemical Properties

1,2-Dichloroethylene exists in three isomers, sym-, cis-60% and trans-40%. There are variations in toxicity between these two forms. At room temperature, these chemicals are colorless liquids with a slightly acrid, ethereal odor. The Odor Threshold in air is 17 ppm. sym-isomer:

Uses

cis-1,2-Dichloroethylene (cis-1,2-DCE) is generally used in the preparation of various enediynes for Bergman cyclization. Applications include the synthesis of:

• 2-(6-substituted 3(Z)-hexen-1,5-diynyl)anilines to prepare corresponding substituted carbazoles.
• (Z)-1-aryl-3-henen-1,5-diynes to obtain the corresponding aryl substituted benzotriazoles.

It is used as a linker to synthesize boron-dipyrromethene (BODIPY)-based photosensitizer for photodynamic therapy (PDT). cis-1,2-DCE can also be used as a precursor to synthesize intermediates of sporolide B.

Definition

ChEBI: Cis-1,2-dichloroethene is a 1,2-dichloroethene.

General Description

A clear colorless liquid with an ether-like odor. Flash point 36-39°F. Denser than water and insoluble in water. Vapors heavier than air. Used in the making of perfumes.

Air & Water Reactions

Highly flammable.Slightly soluble in water.

Reactivity Profile

1,2-DICHLOROETHYLENE and potassium hydroxide forms chloroacetylene, which is explosive and spontaneously flammable in air. CIS-1,2-DICHLOROETHYLENE is highly toxic, Rutledge, p134(1968).

Health Hazard

May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.

Fire Hazard

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

Safety Profile

Mildly toxic by ingestion and inhalation. In high concentration it is irritating and narcotic. Has produced liver and kidney injury in experimental animals. Mutation data reported. Sometimes thought to be nonflammable, however, it is a dangerous fire hazard when exposed to heat or flame. Reaction with solid caustic alkalies or their concentrated solutions produces chloracetylene gas, whch ignites spontaneously in air. Reacts violently with N2O4, KOH, Na, NaOH. Moderate explosion hazard in the form of vapor when exposed to flame. Can react vigorously with oxidizing materials. To fight fire, use water spray, foam, CO2, dry chemical. When heated to decomposition it emits toxic fumes of Cl-. See also VINYLIDENE CHLORIDE and CHLORINATED HYDROCARBONS, ALIPHATIC.

Potential Exposure

Primary irritant (w/o allergic reaction). 1,2-Dichloroethylene is used as a solvent for waxes, resins, and acetylcellulose. It is also used in the extraction of rubber, as a refrigerant; in the manufacture of pharmaceuticals and artificial pearls; and in the extraction of oils and fats from fish and meat.

Shipping

UN1150 Dichloroethylene, Hazard Class: 3; Labels: 3-Flammable liquid.

Purification Methods

Purify it by careful fractional distillation, followed by passage through neutral activated alumina. Also by shaking with mercury, drying with K2CO3 and distilling from CaSO4. Stabilise it with 0.02% of 2,6-di-tert-butyl-p-cresol. [Beilstein 1 IV 707.]

Incompatibilities

May form explosive mixture with air. Attacks some plastics, rubber, and coatings. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Gradual decomposition results in hydrochloric acid formation in the presence of ultraviolet light or upon contact with hot metal or other hot surfaces. Reacts with strong bases; potassium hydroxide; difluoromethylene, dihypofluoride, nitrogen tetroxide (explosive); or copper (and its alloys) producing toxic chloroacetylene which is spontaneously flammable on contact with air. Attacks some plastics and coatings.

Waste Disposal

Incineration, preferably after mixing with another combustible fuel. Care must be exercised to assure complete combustion to prevent the formation of phosgene. An acid scrubber is necessary to remove the halo acids produced. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≧100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.