ChemicalBook > CAS DataBase List > Boron trichloride

Boron trichloride

Product Name
Boron trichloride
CAS No.
10294-34-5
Chemical Name
Boron trichloride
Synonyms
BCl3;Trichloroborane;Boron trichL;Trichloroboron;Boron chloride;chloruredebore;trichloro-Boron;trichloro-boran;Chlorure de bore;Borane,trichloro-
CBNumber
CB8852623
Molecular Formula
BCl3
Formula Weight
117.17
MOL File
10294-34-5.mol
More
Less

Boron trichloride Property

Melting point:
−107 °C(lit.)
Boiling point:
12.5 °C(lit.)
Density 
1.326 g/mL at 25 °C
vapor density 
4.05 (vs air)
vapor pressure 
29.72 psi ( 55 °C)
Flash point:
84 °F
storage temp. 
2-8°C
solubility 
Miscible with dichloromethane, ethanol, carbon tetrachloride, diethyl ether, dimethyl formamide, aromatic solvents, saturated and halogenated hydrocarbon.
form 
Solution
color 
White
Water Solubility 
decomposes
Sensitive 
Moisture Sensitive
Merck 
14,1348
Exposure limits
ACGIH: TWA 50 ppm
OSHA: TWA 25 ppm; STEL 125 ppm
NIOSH: IDLH 2300 ppm
Stability:
Unstable. Incompatible with metals. Reacts violently with water. Reacts vigorously with aniline, phosphine, dinitrogen tetroxide. Fumes in moist air.
CAS DataBase Reference
10294-34-5(CAS DataBase Reference)
NIST Chemistry Reference
Borane, trichloro-(10294-34-5)
EPA Substance Registry System
Boron trichloride (10294-34-5)
More
Less

Safety

Hazard Codes 
T+,T,N,F
Risk Statements 
14-26/28-36/37/38-40-67-65-62-51/53-48/20-34-11-50/53-26/27/28-63-39/23/24/25-24-21-10
Safety Statements 
9-26-28-36/37/39-45-8-61-38-28A-16-1-60-33-23-7/9-62-36/37
RIDADR 
UN 3390 6.1/PG 1
WGK Germany 
3
RTECS 
ED1925000
10-21
Hazard Note 
Very toxic
TSCA 
Yes
DOT Classification
2.3, Hazard Zone C (Gas poisonous by inhalation)
HazardClass 
2.3
PackingGroup 
II
HS Code 
28121049
Hazardous Substances Data
10294-34-5(Hazardous Substances Data)
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Danger
Hazard statements

H225Highly Flammable liquid and vapour

H300Fatal if swallowed

H314Causes severe skin burns and eye damage

H370Causes damage to organs

Precautionary statements

P201Obtain special instructions before use.

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

More
Less

N-Bromosuccinimide Price

Sigma-Aldrich
Product number
178934
Product name
Boron trichloride solution
Purity
1.0M in methylene chloride
Packaging
4x25ml
Price
$105
Updated
2024/03/01
Sigma-Aldrich
Product number
178934
Product name
Boron trichloride solution
Purity
1.0M in methylene chloride
Packaging
2l
Price
$481.2
Updated
2024/03/01
Sigma-Aldrich
Product number
91379
Product name
Boron trichloride solution
Purity
12% in methanol, for GC derivatization, LiChropur?
Packaging
100ML
Price
$101
Updated
2022/05/15
Sigma-Aldrich
Product number
91379
Product name
Boron trichloride solution
Purity
12% in methanol, for GC derivatization, LiChropur?
Packaging
10X1ML
Price
$143
Updated
2022/05/15
Sigma-Aldrich
Product number
91379
Product name
Boron trichloride solution
Purity
12% in methanol, for GC derivatization, LiChropur?
Packaging
500ML
Price
$246
Updated
2022/05/15
More
Less

Boron trichloride Chemical Properties,Usage,Production

Description

Boron trichloride is a colorless, acid gas that fumes in the presence of moist air. It is packaged in steel cylinders as a liquid under its own vapor pressure of 19.1 psia (132 kPa, abs) at 70°F (21.1°C). It reacts with water or moist air to produce hydrochloric and boric acid.

Chemical Properties

Boron trichloride is a colorless gas with a pungent odor. It reacts violently with water, and on decomposition and hydrolysis yields hydrochloric and boric acid. It has a pungent, highly irritating odor. Occupational exposure to boron and boron compounds can occur in industries that produce special glass, washing powder, soap and cosmetics, leather, cement, etc.

Uses

Boron trichloride is a Lewis acid, forming stable addition compounds with such donors as ammonia and the amines and is used in the laboratory to promote reactions that liberate these donors. The compound is important industrially as a source of pure boron (reduction with hydrogen) for the electronics industry. It is also used for the preparation of boranes by reaction with metal hydrides.

Uses

Boron trichloride is used in the refining of aluminum, copper, magnesium, and zinc to remove oxides, nitrides, and carbides trom the molten metal. Carbon monoxide, hydrogen, and nitrogen can be removed from an aluminum melt by treating with boron trichloride. It also improves the tensile strength of aluminum and will allow remelting without a major change in the grain structure.
The electronic industry benefits trom boron trichloride in many applications. It is used in the production of optical fibers, as a p-type dopant for thermal diffusion in silicon, and for ion implantation.

Uses

manufacture of and purification of boron; as catalyst for organic reactions; in semiconductors; in bonding of iron, steels; in purification of metal alloys to remove oxides, nitrides and carbides.

Application

One of the most important uses of Boron trichloride is in the preparation of boron fibers ( Fibers, 13. Refractory Fibers). Typically an electrically heated tungsten filament is passed through a chamber containing BCl3 and hydrogen. The BCl3 is reduced, and boron is deposited on the filament, producing a stiff, strong boron fiber.Boron trichloride, like the trifluoride, has been used as a Lewis acid catalyst in organic synthesis in the polymerization of olefins and phosphazines, as well as in catalysis of other organic reactions. Boron trichloride is also used in plasma etching of aluminum and silicon, in semiconductor manufacturing, and as a source of boron for chemical vapor deposition. Steel is boronized by contacting it with a reactive mixture of hydrogen, hydrocarbons, and BCl3 at high temperatures.

Preparation

Boron trichloride can be prepared by high temperature chlorination of boron trioxide, boric acid, metal borates or other boron compounds. Chlorine, hydrogen chloride, phosgene, silicon tetrachloride, metal chlorides, carbontetrachloride, sulfuryl chloride and phosphorus tri- and pentachlorides are some of the common chlorinating agents. The reaction is carried out at temperatures varying between 400° to 1,400°C, depending on the reactants used. In commercial processes, carbon is generally used to reduce boron oxide during its chlorination. Some of the preparative reactions are outlined below:
B2O3 + 2PCl3 → 2BCl3 + P2O3
2B2O3 + 3CCl4 → 4BCl3 + 3CO2
B2O3 + 3C+ 3Cl2 → 2BCl3 + 3CO
2B(OH)3 +3C + 3Cl2 → 2BCl3 + 3CO + 3H2O
B2O3 + 3C + 6HCl → 2BCl3 + 3CO + 3H2
Na2B4O7 + 7C + 14HCl → 4BCl3 + 2NaCl + 7CO + 7H2
2KBF4 + 3MgCl2 → 2BCl3 + 2KF + 3MgF2
Boron trichloride may also be obtained by high temperature chlorination of boron:
2B + 3Cl2 → 2BCl3
B + 3AgCl → BCl3 + 3Ag
In the laboratory, boron trichloride may be made at ordinary temperatures by the reaction of boron trifluoride with aluminum chloride:
BF3 + AlCl3 → BCl3 + AlF3

Definition

A fuming liquid made by passing dry chlorine over heated boron. It is rapidly hydrolysed by water: BCl3 + 3H2O → 3HCl + H3BO3 As there are only three pairs of shared electrons in the outer shell of the boron atom, boron halides form very stable addition compounds with ammonia by the acceptance of a lone electron pair in a coordinate bond to complete a shared octet.

General Description

Boron trichloride appears as a colorless gas with a pungent odor. Fumes irritate the eyes and mucous membranes. Corrosive to metals and tissue and is toxic. Under prolonged exposure to fire or intense heat, the containers may rupture violently and rocket. Used as a catalyst in chemical manufacture, in soldering fluxes, and for many other uses.

Air & Water Reactions

Fumes in air, including moisture in air and soil, to form hydrochloric acid [Merck 11th ed. 1989]. Reacts vigorously with water and forms hydrochloric acid fumes and boric acid.

Reactivity Profile

Boron trichloride vigorously attacks elastomers and packing materials. Contact with Viton, Tygon, Saran and natural and synthetic rubbers is not recommended. Highly corrosive to most metals in the presence of moisture. Reacts energetically with nitrogen dioxide/dinitrogen tetraoxide, aniline, phosphine, triethylsilane, or fat and grease [Mellor 5:132 1946-47]. Reacts exothermically with chemical bases (examples: amines, amides, inorganic hydroxides).

Health Hazard

Boron trichloride is highly irritating and corrosive to the eyes, skin, and mucous membranes of the respiratory and gastrointestinal tracts.may cause severe burns to skin. May result in marked fluid and electrolyte loss and shock. On acute inhalation, boron trichloride result in sneezing, hoarseness, choking, laryngitis, and respiratory tract irritation along with bleeding of the nose and gums, ulceration of the nasal and oral mucosa, bronchitis, pneumonia, dyspnea, chest pain, and pulmonary edema.

Fire Hazard

When heated to decomposition, Boron trichloride emits toxic fumes of chlorides. Boron trichloride will react with water or steam to produce heat, and toxic and corrosive fumes. In hot water, decomposes to hydrochloric acid and boric acid. Fumes and hydrolyzes in moist air to form hydrochloric acid and oily, irritating corrosives. Avoid aniline, hexafluorisopropylidene amino lithium, nitrogen dioxide, phosphine, grease, organic matter, and oxygen. Nitrogen peroxide, phosphine, fat or grease react energetically with Boron trichloride . Oxygen and Boron trichloride react vigorously on sparking. Boron trichloride and aniline react violently in the absence of a coolant or diluent. Stable.

Potential Exposure

Used in refining of aluminum, magnesium, copper alloys, and in polymerization of styrene. Manufacture and purification of boron; catalyst in organic reactions; semiconductors; bonding of iron or steel; purification of metal alloys to remove oxides, nitrides, and carbides; chemical intermediate for boron filaments; soldering flux; electrical resistors; and extinguishing magnesium fires in heat treating furnaces.

Physiological effects

Boron trichloride is irritating and corrosive to all living tissue. Exposure of skin tissue to higher concentrations of boron trichloride or the liquid can cause hydrochloric acid bums and skin lesions resulting in tissue destruction and scarring. Chemical pneumonitis (deep lung inflammation) and pulmonary edema (abnormal fluid buildup in the lungs) result trom excessive exposure to the lower respiratory tract and deep lung. Bums to the eyes result in lesions and possible loss of vision. Symptoms of exposure include tearing of eyes, coughing, labored breathing, and excessive salivary and sputum formation.
ACGIH has not established a Threshold Limit Value (TLV?) for boron trichloride. It is recommended that compliance with the 5 ppm ceiling limit (TLV-C) for hydrogen chloride be used.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately.If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention immediately. Do notinduce vomiting. Medical observation is recommended for24 48 h after breathing overexposure, as pulmonaryedema may be delayed. As first aid for pulmonary edema,a doctor or authorized paramedic may consider administering a corticosteroid spray.

storage

Boron trichloride cylinders should be protected from physical damage. The cylinders should be stored upright and fi rmly secured to prevent falling or being knocked over, in a cool, dry, well-ventilated area of non-combustible construction away from heavily traffi cked areas and emergency exits

Shipping

This chemical requires a shipping label of“POISON GAS, CORROSIVE.” It falls in Hazard Class 2.3(poison) hazard Zone B, with no Packing Group cited.[19, 20]Special precautions: Cylinders must be transported in asecure upright position, in a well-ventilated truck. It is aviolation of transportation regulations to refill compressedgas cylinders without the express written permission of theowner.

Purification Methods

Purify it (from chlorine) by passage through two mercury-filled bubblers, then fractionally distil it under a slight vacuum. In a more extensive purification the nitrobenzene addition compound is formed by passage of the gas over nitrobenzene in a vacuum system at 10o. Volatile impurities are removed from the crystalline yellow solid by pumping at -20o, and the BCl3 is recovered by warming the addition compound at 50o. Passage through a trap at -78o removes entrained nitrobenzene, the BCl3 finally condensing in a trap at -112o [Brown & Holmes J Am Chem Soc 78 2173 1956]. Also purify it by condensing it into a trap cooled in acetone/Dry-ice, where it is pumped for 15minutes to remove volatile impurities. It is then warmed, recondensed and again pumped. [Gamble Inorg Synth III 27 1950.] TOXIC.

Incompatibilities

Incompatible with lead, graphiteimpregnated asbestos, potassium, sodium. Vigorously attacks elastomers, packing materials, natural and synthetic rubber; viton, tygon, saran, silastic elastomers. Avoid aniline, hexafluorisopropylidene amino lithium, nitrogen dioxide, phosphine, grease, organic matter; and oxygen. Nitrogen peroxide, phosphine. Fat or grease react vigorously with boron trichloride. It reacts with water or steam to produce heat, boric acid, and corrosive hydrochloric acid fumes. Oxygen and boron trichloride react vigorously on sparking. Attacks most metals in the presence of moisture.

Waste Disposal

Return refillable compressed gas cylinders to supplier. Nonrefillable cylinders should be disposed of in accordance with local, state, and federal regulations. Allow remaining gas to vent slowly into atmosphere in an unconfined area or exhaust hood. Refillabletype cylinders should be returned to original supplier with any valve caps and outlet plugs secured and valve protection caps in place.

Precautions

Boron trichloride vigorously attacks elastomers and packing materials, natural and synthetic rubbers. It also reacts energetically with nitrogen dioxide/dinitrogen tetraoxide, aniline, phosphine, triethylsilane, or fat and grease. It reacts exothermically with chemical bases such as amines, amides, and inorganic hydroxides. Occupational workers should use gloves of neoprene or butyl rubber, PVC or polyethylene, safety goggles, or glasses and face shield, and safety shoes.

GRADES AVAILABLE

Boron trichloride is available for commercial and industrial purposes with a minimum purity of99.9 percent by weight.
Boron trichloride is also available in ultra high purity grades for use in the electronics industry. Gas purity guidelines have been developed and published by the Semiconductor Equipment and Materials International and can be found in the Book ofSEMI Standards.

Boron trichloride Preparation Products And Raw materials

Raw materials

Preparation Products

More
Less

Boron trichloride Suppliers

TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
Email
Sales-CN@TCIchemicals.com
Country
China
ProdList
24529
Advantage
81
Shanghai Weiji Environmental Protection Technology Co., LTD
Tel
13817380975 13391095697
Email
info@wjscientific.cn
Country
China
ProdList
17
Advantage
58
Shanghai qiyan medicine technology co., ltd
Tel
15021941186
Email
3572772243@qq.com
Country
China
ProdList
191
Advantage
58
Cangzhou Dafeng Chemical Co., Ltd
Tel
18006162369
Email
dfhxchemical@163.com
Country
China
ProdList
18
Advantage
58
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108 18621169109
Fax
86-21-61259102
Email
market03@meryer.com
Country
China
ProdList
40228
Advantage
62
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
Email
saleschina@alfa-asia.com
Country
China
ProdList
30123
Advantage
84
Beijing dtftchem Technology Co., Ltd.
Tel
010-60275820 13031183356
Fax
010-60270825
Email
elainezt@sina.com
Country
China
ProdList
1390
Advantage
62
Energy Chemical
Tel
021-021-58432009 400-005-6266
Fax
021-58436166
Email
sales8178@energy-chemical.com
Country
China
ProdList
44688
Advantage
61
Beijing Ouhe Technology Co., Ltd
Tel
010-82967028 13552068683
Fax
+86-10-82967029
Email
2355560935@qq.com
Country
China
ProdList
12390
Advantage
60
Jia Xing Isenchem Co.,Ltd
Tel
0573-85285100 18627885956
Fax
0573-85285100
Email
isenchem@163.com
Country
China
ProdList
9513
Advantage
66
More
Less

View Lastest Price from Boron trichloride manufacturers

Career Henan Chemical Co
Product
Boron trichloride 10294-34-5
Price
US $1.00/KG
Min. Order
1KG
Purity
85.0-99.8%
Supply Ability
200kgs
Release date
2020-01-16

10294-34-5, Boron trichloride Related Search:


  • trichloro-boran
  • Trichloroborane
  • Trichloroboron
  • trichloro-Boron
  • Trona boron trichloride
  • BORON TRICHLORIDE, 1.0M SOLUTION IN HEPT ANE
  • BORON TRICHLORIDE, 1.0 M SOLUTION IN TO&
  • BORON TRICHLORIDE, 1.0M SOLUTION IN P-XY LENE
  • BORON TRICHLORIDE, 10 WT. % SOLUTION IN 2-CHLOROETHANOL
  • BORON TRICHLORIDE, 1.0M SOLUTION IN DICH LOROMETHANE
  • BORON TRICHLORIDE, 1.0M SOLUTION IN HEXA NES
  • BORON TRICHLORIDE CYL. WITH 5 KG (~NET)
  • BORON TRICHLORIDE, 99.9%
  • BORON TRICHLORIDE SOLUTION, ~1 M IN DICH LOROMETHANE
  • BORON TRICHLORIDE ELECTRONIC
  • BCl3 (1 mol/L) in dichloromethane as solvent
  • Boron trichloride, 1M solution in hexane
  • Boron trichloride, stabilized, 1M solution in methylene chloride
  • BCl3
  • Borane,trichloro-
  • Boron chloride (BCl3)
  • Boron trichloride [1M solution in methylene chloride]
  • Boron trichloride solution 1.0 in hexanes
  • Boron trichloride solution 1.0 in methylene chloride
  • Boron trichloride solution 10t. % in 2-chloroethanol
  • Boron trichloride solution 1.0 in heptane
  • Boron trichloride solution 1.0 in p-xylene
  • Boron trichloride, stab., 1M sol. in methylene chloride, AcroSeal
  • Boron trichloride, 1M solution in hexane, AcroSeal
  • Boron trichloride, 1M (10 wt.%) sol. in 2-chloroethanol, AcroSeal
  • Boron Trichloride (ca. 9% in DichloroMethane, ca. 1.0Mol/L)
  • Boron trichloride, 1M soln. in dichloroMethane, stab.
  • Boron chloride
  • BORON TRICHLORIDE
  • Boron trichloride, 1M soln. in hexane
  • Boron trichloride ,0% [1 M in Methylene chloride]
  • Boron trichloride, 1M solution in Methylene chloride, AcroSeal
  • Boron Trichloride (ca. 16% in Heptane, ca. 1.0Mol/L)
  • Boron trichloride, 1.0 M solution in CH2Cl2, J&KSeal
  • Boron trichloride, 1.0 M solution in hexanes, J&KSeal
  • Boron trichL
  • boron trichloride for electonic industry
  • Boron trichloridestab.1M sol. in methylene chlorideAcroSeal§3
  • Boron trichloride1M solution in hexaneAcroSeal§3
  • Boron Trichloride - 2-Chloroethanol Reagent (5-10%) [for Esterification] (1ml*10)
  • Boron trichloride solution 1.0 M in heptane
  • Boron trichloride solution 1.0 M in hexanes
  • Boron trichloride solution 1.0 M in Methylene chloride
  • Boron trichloride solution 1.0 M in p-xylene
  • Boron trichloride solution 1.0 M in toluene
  • Boron trichloride, 1.0 M solution in heptane, SpcSeal
  • Boron trichloride,stab., 1M sol. in methylenechloride
  • Boron trichloride,1M (10 wt.%) sol. in 2-chloroethanol
  • Boron trichloride, 1.0 M solution in hexanes, SpcSeal
  • Boron trichloride, 1.0 M solution in p-xylene, SpcSeal
  • Boron trichloride, 1.0 M solution in toluene, SpcSeal
  • Boron Trichloride (ca. 13% in p-Xylene, ca. 1.0mol/L)
  • Boron Trichloride (ca. 13% in Toluene, ca. 1.0mol/L)