Sodium cacodylate 97+ Property

Melting point:

200°C

Boiling point:

200°C

storage temp. 

Store at RT.

solubility 

H₂O: 0.5 M at 20 °C, clear, colorless

form 

solid

PH

pH (50g/l, 25℃) : 7.5～9.5

Stability:

Stable.

CAS DataBase Reference

124-65-2(CAS DataBase Reference)

EPA Substance Registry System

Sodium cacodylate (124-65-2)

Safety

Hazard Codes 

T,N

Risk Statements 

23/25-50/53

Safety Statements 

20/21-28-45-60-61

RIDADR 

UN 1688 6.1/PG 2

WGK Germany 

3

RTECS 

CH7890000

F 

3

HazardClass 

6.1(a)

PackingGroup 

II

Hazardous Substances Data

124-65-2(Hazardous Substances Data)

Toxicity

mouse,LD50,intraperitoneal,> 1gm/kg (1000mg/kg),National Technical Information Service. Vol. AD691-490,

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P273Avoid release to the environment.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P311Call a POISON CENTER or doctor/physician.

P501Dispose of contents/container to..…

Sodium cacodylate 97+ Chemical Properties,Usage,Production

Chemical Properties

White crystalline powder

Chemical Properties

Sodium cacodylate is a white crystalline solid which occurs as the trihydrate. It liquefies in the water of hydration @ 60°C and becomes anhydrous @ 120°C.

Uses

Herbicide.

Definition

ChEBI: The organic sodium salt of dimethylarsinate.

General Description

A white crystalline or granular solid with a slight odor. Toxic by ingestion, inhalation, and skin absorption. Used as a herbicide.

Air & Water Reactions

Soluble in water.

Reactivity Profile

Sodium cacodylate 97+ gives basic solutions in water. Corrodes common metals, but reaction is not hazardous. [USCG, 1999]. Liquefies in its own water of crystallization when heated to 60°C; becomes anhydrous at 120°C [Merck]. Burns with a bluish flame, emitting a garlic-like odor [Merck].

Hazard

Toxic by inhalation and ingestion.

Health Hazard

Moderately toxic; probable oral lethal dose in humans is 0.5-5 g/kg or between 1 ounce and 1 pint (or 1 lb.) for a 70 kg (150 lb.) person. It may cause disturbances of the blood, kidneys, and nervous system.

Fire Hazard

Poisoning potential is high when heated to decomposition, or on contact with acids or acid fumes, because Sodium cacodylate 97+ emits highly toxic fumes of arsenic. Avoid water solution in contact with active metals (iron, aluminum, zinc).

Agricultural Uses

Herbicide, Rodenticide, Defoliant, Veterinary medicine: This material has been used as a non-selective herbicide and defoliant for general weed control. Severely restricted for use in EU countries. Not registered for use in the U.S. There are 47 global suppliers

Trade name

ACME® Sodium cacodylate; ALKARSODYL®; ANSAR 160®; ARSECODILE®; ARSYCODILE®; BOLLS-EYE®; CHEMAID®; DREXEL EZY-PICKIN COTTON DEFOLIANT®; DREXEL KACK HERBICIDE®; DUTCH-TREAT®; HERB-ALL®; PHYTAR 560® (with Cacodylic acid); RAD-E-CATE®; SILVISAR®

Potential Exposure

This material has been used as a nonselective herbicide and for general weed control.

Shipping

UN1688 Sodium cacodylate Hazard Class: 6.1; Labels: 6.1-Poisonous materials. UN3465 Organoarsenic compound, solid, n.o.s., Hazard Class: 6.1; Labels: 6.1Poisonous materials, Technical Name Required

Purification Methods

Recrystallise it from aqueous EtOH. [Beilstein 4 H I 612.]

Incompatibilities

Incompatible with oxidizers, strong bases; acids, active metals (iron, aluminum, zinc). Contact with acids react to form highly toxic dimethylarsine gas. Attacks some metals.

Waste Disposal

For cacodylic acid, precipitate as calcium arsenate and calcium arsenite by treatment with excess lime water. Recycle if possible. If not, put in secure storage for possible disposal in leach-proof dumps. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office.