Ammonium perchlorate Property

Melting point:

°Cd ec.)

Density 

1.95 g/mL at 25 °C(lit.)

vapor pressure 

0Pa at 25℃

refractive index 

1.482

solubility 

soluble in methanol; slightly soluble in ethanol, acetone; insoluble in ethyl ether

form 

Crystalline

Specific Gravity

1.95

color 

White

Water Solubility 

Freely soluble in water. Soluble in methanol. Slightly soluble in ethanol, acetone. Insoluble in ether, ethyl acetate

Merck 

14,540

Stability:

Explosive when mixed with combustible material. Incompatible with organics, paper, wood shavings, etc. May explode if heated under confinement or as a result of friction. Incompatible with metals, reducing agents, strong acids.

LogP

-5.84 at 25℃

CAS DataBase Reference

7790-98-9(CAS DataBase Reference)

EPA Substance Registry System

Ammonium perchlorate (7790-98-9)

Safety

Hazard Codes 

O,Xi,Xn,E

Risk Statements 

9-44-48/20/22-36-3

Safety Statements 

17-36/37-27-16-14-35-26

RIDADR 

1442

WGK Germany 

1

RTECS 

SC7520000

TSCA 

Yes

HazardClass 

5.1

PackingGroup 

II

Hazardous Substances Data

7790-98-9(Hazardous Substances Data)

Toxicity

LD50 oral in rabbit: 1900mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H271May cause fire or explosion; strong oxidiser

H319Causes serious eye irritation

H373May cause damage to organs through prolonged or repeated exposure

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P220Keep/Store away from clothing/…/combustible materials.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P370+P378In case of fire: Use … for extinction.

P371+P380+P375in case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.

Ammonium perchlorate Chemical Properties,Usage,Production

Description

Ammonium perchlorate is also shock-sensitive and may explode when exposed to heat or by spontaneous chemical reaction. This is the material that was involved in the explosion at the Pepcon plant in Henderson, Nevada. It is also used in the production of explosives, pyrotechnics, etching and engraving, and jet and rocket propellants.

Chemical Properties

Ammonium perchlorate NH4CI04, is a white solid, soluble, formed by reaction of NH40H and perchlorate acid, and then evaporating. Used in explosives and pyrotechnics.

Uses

Perchlorate is a soluble oxychloro anion most commonly used as a solid salt in the form of ammonium perchlorate, potassium perchlorate, lithium perchlorate, or sodium perchlorate, all of which are highly soluble. Ammonium perchlorate is the most widely used perchlorate compound. In their pure forms, these salts are white or colorless crystals or powders. Perchlorate salts dissolve in water and readily move from surface to groundwater. Perchlorate is known to originate from both natural and man-made sources.
The most common uses for ammonium perchlorate are in explosives, military munitions, and rocket propellants. In addition, perchlorate salts are used in a wide range of nonmilitary applications, including pyrotechnics and fireworks, blasting agents, solid rocket fuel, matches, lubricating oils, nuclear reactors, air bags, and certain types of fertilizers.

Uses

Ammonium perchlorate is used to make rocket propellants, explosives, pyrotechnics, as an etching and engraving agent, and in analytical chemistry.

General Description

A white, crystalline solid or powder. Classified as a division 1.1 explosive if powdered into particles smaller than 15 microns in diameter or if powdered into larger particles but thoroughly dried. Does not readily burn, but will burn if contaminated by combustible material. May explode under prolonged exposure to heat or fire. Used to make rocket propellants, explosives, pyrotechnics, as an etching and engraving agent, and in analytical chemistry.

Air & Water Reactions

Water soluble.

Reactivity Profile

AMMONIUM PERCHLORATE is a strong oxidizing agent. Decomposes at 130°C and explodes at 380°C [Mellor 2 Supp. 1:608 1956]. Explosions have occurred in propellant formulations containing AMMONIUM PERCHLORATE to which ferrocene has been added as a burning rate catalyst. Although the cause was not been definitely established, AMMONIUM PERCHLORATE was most probably frictional heating from dragging a spatula through the mixture [ASESB Expl. Report 211 1966]. Can explode when mixed with sugar, charcoal or on contact with hot copper pipes. Becomes impact-sensitive when contaminated by powdered carbon, ferrocene, sulfur, or other reducing materials such as organic matter or powdered metals.

Hazard

Strong oxidizing agent; ignites violently with combustibles. Shock sensitive; may explode when exposed to heat or by spontaneous chemical reaction. Sensitive, high explosive when contaminated with reducing materials. Skin irritant.

Health Hazard

Irritating to skin and mucous membranes.

Flammability and Explosibility

Non flammable

Safety Profile

moderately toxic by ingestion and parented routes. Flammable when exposed to heat or flame or by spontaneous chemical reaction with reducing materials. A very powerful oxidizer that has caused explosions in industry. Ignites violently with combustibles. Severe explosion hazard; decomposes at 130' and explodes at 380'. When contaminated by powdered carbon, ferrocene, S, organic matter, powdered metals, nitryl perchlorate, potassium periodate, potassium permanganate, it becomes impact sensitive. Potentially explosive reactions with carbon (above 240℃), dichromium trioxide (at 270℃), cadmium oxide (at 260℃), zinc oxide (at 200°C), copper chromite, copper oxide, iron oxide, potassium permanganate, potassium dichromate, mono-, di-, tri-, or tetra-methylammonium perchlorates, metal perchlorates (e.g., lithium perchlorate, zinc perchlorate), nitrophenol-formaldehyde polymer. Mixtures with aluminum or copper burn violently when ignited. Mixtures with ethylene dinitrate ignite when stored at 60℃. When heated to decomposition it emits toxic fumes of NH3 and Cl-. See also PERCHLORATES and EXPLOSIVES, HIGH.

Purification Methods

It is recrystallised twice from distilled water (2.5mL/g) between 80o and 0o, and dried in a vacuum desiccator over P2O5. Drying at 110o might lead to slow decomposition to the chloride. POTENTIALLY EXPLOSIVE.