5,6-Diamino-1-methyluracil
- Product Name
- 5,6-Diamino-1-methyluracil
- CAS No.
- 6972-82-3
- Chemical Name
- 5,6-Diamino-1-methyluracil
- Synonyms
- Linaint-D;1-Methyl-5,6-diaminouracil;5,6-DIAMINO-1-METHYLURACIL;5,6-Diamino-1-methyluracil ,97%;5,6-diamino-1-methylpyrimidine-2,4-dione;5,6-diamino-1-methyl-pyrimidine-2,4-dione;5,6-diamino-1-methyl-pyrimidine-2,4-quinone;5,6-Diamino-1-methylpyrimidine-2,4(1H,3H)-dione;5,6-Diamino-1-methyl-2,4(1H,3H)-pyrimidinedione;2,4(1H,3H)-Pyrimidinedione,5,6-diamino-1-methyl-
- CBNumber
- CB9395774
- Molecular Formula
- C5H8N4O2
- Formula Weight
- 156.14
- MOL File
- 6972-82-3.mol
5,6-Diamino-1-methyluracil Property
- Melting point:
- 270°C(lit.)
- Density
- 1.407±0.06 g/cm3(Predicted)
- storage temp.
- Keep in dark place,Inert atmosphere,Room temperature
- solubility
- DMSO (Sparingly), Methanol (Slightly), Water (Sparingly)
- form
- powder to crystal
- pka
- 9.18±0.40(Predicted)
- color
- White to Light yellow to Green
- CAS DataBase Reference
- 6972-82-3(CAS DataBase Reference)
Safety
- Hazard Codes
- F
- Risk Statements
- 36/37/38-10
- Safety Statements
- 26-36/37/39-16
- HazardClass
- IRRITANT
- HS Code
- 29335990
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H315Causes skin irritation
H319Causes serious eye irritation
- Precautionary statements
-
P264Wash hands thoroughly after handling.
P264Wash skin thouroughly after handling.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352IF ON SKIN: wash with plenty of soap and water.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P321Specific treatment (see … on this label).
P332+P313IF SKIN irritation occurs: Get medical advice/attention.
P362Take off contaminated clothing and wash before reuse.
N-Bromosuccinimide Price
- Product number
- D5010
- Product name
- 5,6-Diamino-1-methyluracil
- Purity
- >98.0%(HPLC)(N)
- Packaging
- 1g
- Price
- $40
- Updated
- 2025/07/31
- Product number
- D5010
- Product name
- 5,6-Diamino-1-methyluracil
- Purity
- >98.0%(HPLC)(N)
- Packaging
- 5g
- Price
- $51
- Updated
- 2025/07/31
- Product number
- D416545
- Product name
- 6-Diamino-1-methyluracil
- Packaging
- 10g
- Price
- $350
- Updated
- 2021/12/16
- Product number
- 43752
- Product name
- 5,6-Diamino-1-methyluracil,≥98%(HPLC)
- Purity
- ≥98%(HPLC)
- Packaging
- 1G
- Price
- $33.51
- Updated
- 2021/12/16
- Product number
- FD29582
- Product name
- 5,6-Diamino-1-methyluracil
- Packaging
- 2g
- Price
- $50
- Updated
- 2021/12/16
5,6-Diamino-1-methyluracil Chemical Properties,Usage,Production
Chemical Properties
Yellow solid
Uses
6-Diamino-1-methyluracil is used to prepare tyrosine kinase erythropoietin inhibitors producing hepatocellular carcinoma receptor B4 (EphB4).
Synthesis
6972-78-7
6972-82-3
The general steps for the synthesis of 5,6-diamino-1-methyluracil from 6-amino-1-methyl-5-nitrosouracil are as follows: in order to improve the conversion of the reaction, the catalytic reduction reaction system of 6-amino-5-nitroso-1-methyluracil was optimized, and the post-treatment steps were adapted to obtain a high separation yield. The specific optimization steps were as follows: 1) 0.4 g of ammonium metatungstate-modified palladium metal catalyst (see Example 1 for preparation) was added to 80 ml of isopropanol with 10.0 g of 6-amino-5-nitroso-1-methyluracil substrate, and placed in a hydrogenation reactor with stirring; 2) the air in the hydrogenation reactor was displaced with nitrogen three times, and the temperature of the reactor was adjusted to 55° C. The reaction was carried out under a hydrogen pressure of 0.3 MPa The reaction was carried out under 0.3 MPa hydrogen pressure. After 2 hours of reaction, the reaction was analyzed by HPLC (99.6% conversion and 98.3% selectivity), the stirring was stopped, the hydrogen pressure was released, and the reactor was cooled down to room temperature. 3) The reaction solution was filtered to remove the catalyst, and the filtrate was collected and heated up to 50-60°C. 4) Pure water was slowly added dropwise to the hot filtrate until it appeared turbid, then the dropwise addition was paused and the solution was left for 2 hours. Continue adding water dropwise until no more crystals were precipitated (a total of 45 ml of water was added dropwise, of which 10 ml was added at the time of initial turbidity and 35 ml was added dropwise), the mixture was cooled down to 10 ℃, filtered and dried, to obtain a light yellow 5,6-diamino-1-methyluracil (92.3% yield by weight, 99.4% purity by volume).
References
[1] Russian Journal of Applied Chemistry, 1994, vol. 67, # 8.2, p. 1223 - 1224
[2] Zhurnal Prikladnoi Khimii (Sankt-Peterburg, Russian Federation), 1994, vol. 67, # 8, p. 1389 - 1391
[3] Chemical and Pharmaceutical Bulletin, 2013, vol. 61, # 4, p. 477 - 482
[4] Patent: CN107987028, 2018, A. Location in patent: Paragraph 0022
[5] Patent: CN104211702, 2018, B. Location in patent: Paragraph 0173; 0178; 0179
5,6-Diamino-1-methyluracil Preparation Products And Raw materials
Raw materials
Preparation Products
5,6-Diamino-1-methyluracil Suppliers
- Tel
- 320-37350700
- Fax
- +32 (0)37350701
- sales@tcieurope.eu
- Country
- Europe
- ProdList
- 23671
- Advantage
- 75
View Lastest Price from 5,6-Diamino-1-methyluracil manufacturers
- Product
- 5,6-DiaMino-1-Methyluracil 6972-82-3
- Price
- US $1.00/KG
- Min. Order
- 1KG
- Purity
- 99%
- Supply Ability
- 20T
- Release date
- 2020-05-14
- Product
- 5,6-Diamino-1-methyluracil 6972-82-3
- Price
- US $10.00/KG
- Min. Order
- 1KG
- Purity
- 99%
- Supply Ability
- 20 Tons
- Release date
- 2021-10-15
- Product
- 5,6-Diamino-1-methyluracil 6972-82-3
- Price
- US $1.00/kg
- Min. Order
- 1kg
- Purity
- 98%
- Supply Ability
- 100KG
- Release date
- 2018-12-21