COBALT(II) IODIDE
- Product Name
- COBALT(II) IODIDE
- CAS No.
- 15238-00-3
- Chemical Name
- COBALT(II) IODIDE
- Synonyms
- COBALT IODIDE;cobalt diiodide;Einecs 239-283-2;COBALTOUS IODIDE;COBALT(II) IODIDE;cobaltiodide(coi2);Cobalt(II) diiodide;Cobaltiodideanhydrous;Cobalt(Ⅱ) iodide dihydrate;cobalt(ii) iodide, ultra dry
- CBNumber
- CB9706215
- Molecular Formula
- CoI2
- Formula Weight
- 312.74
- MOL File
- 15238-00-3.mol
COBALT(II) IODIDE Property
- Melting point:
- >515 °C(lit.)
- Boiling point:
- 570°C
- Density
- 5.45 g/mL at 25 °C(lit.)
- Flash point:
- 570°C vac.
- solubility
- acetone: slightly soluble(lit.)
- form
- powder
- color
- White
- Specific Gravity
- 5.68
- Water Solubility
- Soluble in water.
- Sensitive
- Hygroscopic
- Merck
- 14,2443
- Exposure limits
- ACGIH: TWA 0.02 mg/m3
- Stability:
- hygroscopic
- CAS DataBase Reference
- 15238-00-3(CAS DataBase Reference)
- EPA Substance Registry System
- Cobalt iodide (CoI2) (15238-00-3)
Safety
- Hazard Codes
- Xn
- Risk Statements
- 20/21/22-36/37/38
- Safety Statements
- 26-36
- WGK Germany
- 3
- TSCA
- Yes
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H315Causes skin irritation
H317May cause an allergic skin reaction
H319Causes serious eye irritation
H335May cause respiratory irritation
H341Suspected of causing genetic defects
- Precautionary statements
-
P201Obtain special instructions before use.
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P308+P313IF exposed or concerned: Get medical advice/attention.
P405Store locked up.
N-Bromosuccinimide Price
- Product number
- 023119
- Product name
- Cobalt(II) iodide, anhydrous, 99.5% (metals basis)
- Packaging
- 25g
- Price
- $170
- Updated
- 2024/03/01
- Product number
- 023119
- Product name
- Cobalt(II) iodide, anhydrous, 99.5% (metals basis)
- Packaging
- 100g
- Price
- $516.65
- Updated
- 2024/03/01
- Product number
- 93-2743
- Product name
- Cobalt(II) iodide, anhydrous, min. 95% (99.5%-Co)
- Packaging
- 10g
- Price
- $121
- Updated
- 2024/03/01
- Product number
- 93-2743
- Product name
- Cobalt(II) iodide, anhydrous, min. 95% (99.5%-Co)
- Packaging
- 50g
- Price
- $513
- Updated
- 2024/03/01
- Product number
- 047185
- Product name
- Cobalt(II) iodide, ultra dry
- Purity
- 99.999% (metals basis)
- Packaging
- 1g
- Price
- $134.65
- Updated
- 2024/03/01
COBALT(II) IODIDE Chemical Properties,Usage,Production
Description
Cobalt iodide appears as black crystals with a slight ‘iodine’-like odour. When heated to decomposition, it may emit toxic fumes of iodine and oxides of nitrogen. Anhydrous cobalt (II) iodide is sometimes used to test for the presence of water in various solvents. Cobalt (II) iodide is used as a catalyst, for example, in carbonylations. It catalyses the reaction of diketene with Grignard reagents, useful for the synthesis of terpenoids.
Chemical Properties
Brownish red crystalline powder
Physical properties
Exists in two isomorphous forms, α- and ?-forms; both modifications highly hygroscopic. The α-form is black hexagonal crystal; density 5.58 g/cm3; turns dark green in air; melts at 560°C; disolves in water giving pink coloration. The α-forms sublimes in vacuo, partly forming an isomorous yellow modification-the anhydrous β-form.
The β-modification is a yellow powder; density 5.45 g/cm3; converts to the α-form when heated to 400°C; absorbs moisture from air, the yellow powder becoming green droplets; dissolves readily in water forming a colorless solution which turns pink on heating.
The hexahydrate is red hexagonal crystals; density 2.90 g/cm3; loses water at 130°C giving anhydrous iodide; soluble in water, ethanol, acetone, chloroform and ether, forming colored solutions, (while the aqueous solution is red below 20°C and green above this temperature; the salt forms blue solution in ethanol, chloroform and ether).
Uses
Cobalt(II) iodide is used as a moisture and humidity indicator. It is also used as a catalyst.
Uses
Hygrometers; determination of water in organic solvents; catalyst.
Preparation
Cobalt(II) iodide is prepared by heating cobalt powder in a stream of hydrogen iodide at 400 to 450°C:
Co + 2HI → CoI2 + H2
The product obtained is the black crystalline α-form.
Cobalt(II) iodide also may be made by heating cobalt powder with iodine vapor.
Structure and conformation
Cobalt(II) iodide crystallizes in two polymorphs, the α- and β-forms. The α-polymorph comprises black hexagonal crystals, which turn dark green when exposed to air. Under vacuum at 500℃, samples of α-CoI2 sublime, forming the β-polymorph as yellow crystals. β-CoI2 also easily absorbs moisture from the air, converting into green hydrate. Below 400℃, β-CoI2 reverts back to the α-form. The anhydrous salt has the cadmium halide structure. The hexaaquo salt comprises separated [Co(H2O)6] 21 and iodide ions.
COBALT(II) IODIDE Preparation Products And Raw materials
Raw materials
Preparation Products
COBALT(II) IODIDE Suppliers
- Tel
- 15871464247 17307245989
- 3471278124@qq.com
- Country
- China
- ProdList
- 2307
- Advantage
- 58
- Tel
- 010-82848833 400-666-7788
- Fax
- 86-10-82849933
- jkinfo@jkchemical.com
- Country
- China
- ProdList
- 94657
- Advantage
- 76
- Tel
- 400-6106006
- Fax
- 021-67582001/03/05
- saleschina@alfa-asia.com
- Country
- China
- ProdList
- 30123
- Advantage
- 84
- Tel
- 021-54306202 13764082696
- info@hanhongsci.com
- Country
- China
- ProdList
- 42958
- Advantage
- 64
- Tel
- 4009903999 13355009207
- Fax
- 0539-6365991
- 3007715519@qq.com
- Country
- China
- ProdList
- 18738
- Advantage
- 57
- Tel
- 010-56205725
- Fax
- 010-65763397
- waley188@sohu.com
- Country
- China
- ProdList
- 12335
- Advantage
- 58
- Tel
- 15523000485
- xingcanyaoye@sina.com
- Country
- China
- ProdList
- 1686
- Advantage
- 58
- Tel
- 15221275939 15221275939
- Fax
- 021-50706099
- shenlinxing@macklin.cn
- Country
- China
- ProdList
- 16166
- Advantage
- 55
- Tel
- 021-61415566 800-8193336
- orderCN@merckgroup.com
- Country
- China
- ProdList
- 51456
- Advantage
- 80
- Tel
- 010-60605840 18892239720
- Fax
- 010-60605840
- psaitong@jm-bio.com
- Country
- China
- ProdList
- 12306
- Advantage
- 58