Basic information Safety Supplier Related

1-PHENYL-1-PYRIDIN-2-YLMETHANAMINE DIHYDROCHLORIDE

Basic information Safety Supplier Related

1-PHENYL-1-PYRIDIN-2-YLMETHANAMINE DIHYDROCHLORIDE Basic information

Product Name:
1-PHENYL-1-PYRIDIN-2-YLMETHANAMINE DIHYDROCHLORIDE
Synonyms:
  • α-Phenyl-2-pyridineMethanaMine
  • 2-PyridineMethanaMine, α-phenyl
  • (R)-phenyl(pyridin-2-yl)methanamine
  • alpha-(2-Pyridyl)benzylamine
CAS:
39930-11-5
MF:
C12H12N2
MW:
184.24
Mol File:
39930-11-5.mol
More
Less

1-PHENYL-1-PYRIDIN-2-YLMETHANAMINE DIHYDROCHLORIDE Chemical Properties

Melting point:
54-55 °C
Boiling point:
159-165 °C(Press: 3 Torr)
Density 
1.106±0.06 g/cm3(Predicted)
storage temp. 
Keep in dark place,Inert atmosphere,Store in freezer, under -20°C
pka
7.51±0.10(Predicted)
Appearance
Light yellow to brown Liquid
More
Less

1-PHENYL-1-PYRIDIN-2-YLMETHANAMINE DIHYDROCHLORIDE Usage And Synthesis

Synthesis

1826-28-4

39930-11-5

The general procedure for the synthesis of 3-(2-pyridyl)aniline from phenyl-2-pyridyl ketoxime was as follows: phenyl(2-pyridyl)ketoxime (5.0 g, 25.2 mmol) was dissolved in ice-cold mixed solvent of acetic acid (50 mL) and ethanol (100 mL). Under stirring, zinc powder (50 g) was added in batches of 2 g. After addition, the reaction mixture was stirred at room temperature for 24 hours. After completion of the reaction, the unreacted zinc powder was removed by filtration and washed well with ethanol. The filtrate and washings were combined and concentrated under reduced pressure. Several 10 mL of water were added to the concentrate and the acetic acid was removed by evaporation. The pH of the mixture was adjusted to about 12 with aqueous KOH and then extracted with diethyl ether (3 x 50 mL). The organic phases were combined, dried over anhydrous Na2SO4, and the solvent was evaporated under reduced pressure to afford the target product 3-(2-pyridyl)aniline in a yield of 4.5 g (96.8% yield). The product was subjected to IR, 1H NMR, 13C NMR and elemental analysis to confirm the structure.IR (KBr, cm-1): 3445(b), 3307(b), 3255(s), 3180(s), 3101(w), 1630(s), 1604(s), 1549(w), 1519(s), 1477(s), 1466(s), 1441(s), 1363(s). 1441(s), 1363(s), 1282(s), 1252(s), 1211(w), 1161(w), 1097(s), 1038(s), 766(s), 658(w), 640(w), 543(s).1H NMR (400 MHz, CDCl3): δ 8.53 (1H, d, J=4.8Hz ), 7.56(1H, t, J=7.6Hz), 7.39(1H, d, J=8.0Hz), 7.30(1H, t, J=7.6Hz), 7.24(1H, t, J=6.4Hz), 7.19(1H, d, J=6.4Hz), 7.10(1H, t, J=6.2Hz), 5.21(1H, s), 5.21(1H, s). 2.75 (2H, s, NH2).13C NMR (100 MHz, CDCl3): δ 158.6, 154.2, 149.6, 136.7, 131.0, 129.2, 128.7, 128.5, 123.1, 56.2. Elemental analysis (C12H12N2) calculated values: C, 78.23; H, 6.57; N Calculated values for elemental analysis (C12H12N2): C, 78.23; H, 6.57; N, 15.21. Measured values: C, 77.64; H, 5.98; N, 15.13%.

References

[1] Inorganica Chimica Acta, 2012, vol. 390, p. 154 - 162
[2] Inorganica Chimica Acta, 2013, vol. 394, p. 210 - 219
[3] European Journal of Inorganic Chemistry, 2010, # 12, p. 1791 - 1797
[4] Journal of Organic Chemistry, 2009, vol. 74, # 9, p. 3566 - 3568

1-PHENYL-1-PYRIDIN-2-YLMETHANAMINE DIHYDROCHLORIDESupplier

Shanghai Hanhong Scientific Co.,Ltd.
Tel
021-54306202 13764082696
Email
info@hanhongsci.com
Shanghai Ennopharm Co., Ltd.
Tel
+86 (21) 6435-5022
Shanghai Sunway Pharmaceutical Technology Co., Ltd
Tel
18270980682
Email
mlcheng@sunwaypharm.cn
SynAsst Chemical.
Tel
021-60343070
Bide Pharmatech Ltd.
Tel
400-164-7117 13681763483
Email
product02@bidepharm.com