Basic information Safety Supplier Related

Mesoridazine Besylate

Basic information Safety Supplier Related

Mesoridazine Besylate Basic information

Product Name:
Mesoridazine Besylate
Synonyms:
  • SERENTIL
  • benzenesulfonicacid,compd.with10-(2-(1-methyl-2-piperidinyl)ethyl)-2-(meth
  • nc123
  • ylsulfinyl)ethyl)-10h-phenothiazine(1:1)
  • MESORIDAZINE BENZENESULFONATE
  • MESORIDAZINE BESYLATE
  • 10-[2-(1-METHYL-2-PIPERIDINYL)ETHYL]-2-(METHYLSULFINYL)-10H-PHENOTHIAZINE
  • 10-(2-(1-Methylpiperidin-2-yl)ethyl)-2-(methylsulfinyl)-10H-phenothiazine benzenesulfonate
CAS:
32672-69-8
MF:
C27H32N2O4S3
MW:
544.75
Product Categories:
  • SERENTIL
Mol File:
32672-69-8.mol
More
Less

Mesoridazine Besylate Chemical Properties

Melting point:
174-175 °C
storage temp. 
2-8°C
solubility 
DMSO: 10 mg/mL
form 
solid
color 
white
Stability:
Hygroscopic
More
Less

Safety Information

Hazard Codes 
Xn
Risk Statements 
22
WGK Germany 
3
RTECS 
DB7176700
HS Code 
2934302300
Toxicity
LD50 in mice (mg/kg): 33 i.v.; 611 s.c.; 346 orally (Maruyama)

MSDS

More
Less

Mesoridazine Besylate Usage And Synthesis

Originator

Serentil,Sandoz,US,1970

Uses

Mesoridazine (M225755) Besylate is an antipsychotic.

Uses

antpsychotic

Definition

ChEBI: The benzenesulfonate salt of mesoridazine prepared using equimolar amounts of mesoridazine and benzenesulfonic acid.

Manufacturing Process

10.0 g of 3-methylmercapto phenothiazine and 17.5 cc of acetic acid anhydride are refluxed for 8 hours from an oil bath maintained at a temperature of 180°C. After concentration of the solution the residue is crystallized from ethanol. The pure 3-methylmercapto-10-acetyl phenothiazine melts at 89° to 91°C. For the purpose of oxidation 5.0 g of 3- methylmercapto-10-acetyl phenothiazine are dissolved in 50 cc of ethanol, refluxed from an oil bath maintained at 120°C and 1.6 cc of a 40% hydrogen peroxide solution are then added dropwise in the course of 30 minutes.
Heating is continued for another 5 hours and the reaction mixture is concentrated after 50 cc of water have been added. The residue is taken up in 40 cc of benzene and the benzene layer washed with 10 cc of water. After having been concentrated, the residue, crude 3-methylsulfinyl-10-acetyl phenothiazine, is dissolved in 55 cc of a 90% methanol solution for splitting off the acetyl group and, after 2.9 g of potassium carbonate have been added, it is boiled for 2 hours under reflux on an oil bath kept at a temperature of 120°C. After concentration, the residue is taken up in 50 cc of chloroform, the chloroform layer is washed with a total of 25 cc of water, dried over potassium carbonate, filtered and concentrated. After twice crystallizing the residue, each time from 50 cc of ethanol, analytically pure 3-methylsulfinyl phenothiazine (MP 193° to 195°C) is obtained.
A mixture of 10.0 g of 3-methylsulfinyl phenothiazine (MP 193° to 195°C), 6.1 g of finely powdered sodium hydroxide and 125 cc of toluene is boiled for 1 hour under reflux with a water separator on an oil bath kept at a temperature of 150°C, while the mixture is stirred. Without interrupting the boil a solution of 7.0 g of 2-(N-methyl-piperidyl-2')-1-chloroethane (BP 84°C/10 mm Hg) in 10 cc of toluene is added dropwise in the course of 1 hour, after which boiling is continued for another 3 hours. When the reaction mixture has cooled it is first washed with 25 cc of water three times and then extracted with 75 cc of a 15% aqueous tartaric acid solution. The tartaric acid extract is shaken out with 25 cc of benzene, 20 cc of concentrated caustic soda are added until the phenolphthalein reaction is alkaline, and the separated oily base is taken up in a total of 150 cc of benzene.
After having been washed with 50 cc of water the benzene layer is dried over potassium carbonate, filtered, allowed to stand over 10 g of alumina for about 1? hours for partial decolorization, filtered again and concentrated under reduced pressure. The oily base which remains as a residue is directly converted into the tartrate. A solution cooled to 0°C, of 6.50 g of the free base in 100 cc of acetic acid ethyl ester is thoroughly shaken and poured into an ice cold solution of 2.66 g of tartaric acid in 410 cc of acetic acid ethyl ester. The precipitated, analytically pure, tartrate of 3-methylsulfinyl-10-[2'-Nmethyl-piperidyl-2')-ethyl-l']-phenothiazine melts at 115° to 120°C (foam formation) and sinters above 80°C. The base is reacted with benzene sulfonic acid in a suitable solvent to give the besylate.

brand name

Serentil (Novartis).

Therapeutic Function

Tranquilizer

General Description

Mesoridazine besylate,10-[2-(methyl-2-piperidyl)ethyl]-2-(methylsulfinyl)phenothiazinemonobenzenesulfonate (Serentil), shares manyproperties with thioridazine. However, no pigmentaryretinopathy has been reported.

Mesoridazine BesylateSupplier

Sinopharm Chemical Reagent Co,Ltd.
Tel
86-21-63210123
Email
sj_scrc@sinopharm.com
Shanghai TaoSu Biochemical Technology Co., Ltd.
Tel
021-33632979
Email
info@tsbiochem.com
Shanghai Rechem science Co., Ltd.
Tel
21-31433387 15618786686
Email
sales@rechemscience.com
Beijing Solarbio Science & Tecnology Co., Ltd.
Tel
010-50973186 4009686088
Email
3193328036@qq.com
Aikon International Limited
Tel
025-66113011 18112977050
Email
cb6@aikonchem.com