1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDE
1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDE Basic information
- Product Name:
- 1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDE
- Synonyms:
-
- 1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDE
- N-TERT-BUTYL-1-METHYLCYCLOPROPANE-1-SULFONAMIDE
- EOS-60886
- CYCLOPROPANESULFONAMIDE, N-(1,1-DIMETHYLETHYL)-1-METHYL-
- N-tert-butyl-1-methyl-1-cyclopropanesulfonamide
- CAS:
- 669008-25-7
- MF:
- C8H17NO2S
- MW:
- 191.29
- Mol File:
- 669008-25-7.mol
1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDE Chemical Properties
- Boiling point:
- 259.0±23.0 °C(Predicted)
- Density
- 1.11±0.1 g/cm3(Predicted)
- storage temp.
- Sealed in dry,Room Temperature
- pka
- 12.01±0.20(Predicted)
- Appearance
- White to off-white Solid
1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDE Usage And Synthesis
Synthesis
63132-85-4
74-88-4
669008-25-7
General procedure for the preparation of N-tert-butyl-1-methylcyclopropane-1-sulfonamide: N-tert-butyl-3-chloropropane-1-sulfonamide (100 g, 468 mmol), which was pre-dried by azeotropy with 3 x 100 mL of toluene, was dissolved in THF (1500 mL). The solution was cooled to an internal temperature of -69 °C, followed by the dropwise addition of butyllithium (2.5 M hexane solution, 412 mL, 1.02 mol) over 55 min while ensuring that the internal temperature remained below -65 °C. The ice bath was removed and the reaction mixture was slowly warmed to room temperature over 1.5 hr and then cooled again to an internal temperature of -69°C. Butyl lithium (196 mL, 515 mmol) was added to the reaction mixture over 25 minutes while maintaining the internal temperature below -65°C. Subsequently, the reaction mixture was warmed to room temperature over 1.5 hours. The reaction mixture was again cooled to an internal temperature of -69 °C and iodomethane (58.5 mL, 936 mmol) was added dropwise over 40 min while controlling the internal temperature below -65 °C. The reaction mixture was heated to an internal temperature of -50 °C over 4 hours. The cold bath was removed and quenched by adding saturated NH4Cl solution (1000 mL). The quenched reaction mixture was transferred to a dispensing funnel along with ethyl acetate (100 mL) and water (500 mL). The layers were separated and the aqueous layer was extracted with ethyl acetate (3 x 75 mL). The organic layers were combined, washed with brine (700 mL), dried over MgSO4 and concentrated in vacuum to give an off-white solid. The solid was dried under high vacuum for 30 min to give N-tert-butyl-1-methylcyclopropane-1-sulfonamide as a white solid (88.5 g, 99% yield).1H NMR (500 MHz, CDCl3) δ 4.07 (bs, 1H), 1.51 (s, 3H), 1.38-1.41 (m, 2H), 1.36 (s, 9H), and 0.77-0.80 (m, 2H).
References
[1] Patent: US2013/102589, 2013, A1. Location in patent: Paragraph 0072; 0073
[2] Patent: EP2792360, 2014, A1. Location in patent: Paragraph 0104-0105
[3] Synlett, 2006, # 5, p. 725 - 728
[4] Patent: US2008/107625, 2008, A1. Location in patent: Page/Page column 25
[5] Patent: US2004/77551, 2004, A1. Location in patent: Page/Page column 25
1-METHYL-CYCLOPROPANESULFONIC ACID TERT-BUTYLAMIDESupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 13817811078
- sales@jingyan-chemical.com
- Tel
- 025-58395930
- sales@acornpharma.com
- Tel
- 15928766785 15928766785
- wupengcheng@astatech.cn
- Tel
- sales@ahpharmatech.com