2,2-Dimethyl-4,7,10,13-tetraoxa-2-silatetradecane
2,2-Dimethyl-4,7,10,13-tetraoxa-2-silatetradecane Basic information
- Product Name:
- 2,2-Dimethyl-4,7,10,13-tetraoxa-2-silatetradecane
- Synonyms:
-
- 2,2-DIMETHYL-4,7,10,13-TETRAOXA-2-SILATETRADECANE,99+%ELECTROLYTESOLVENTANL-1S1M3
- METHOXY(TRIETHYLENOXY)METHYLTRIMETHYLSILANE
- 4,7,10,13-Tetraoxa-2-silatetradecane, 2,2-dimethyl-
- 2,2-Dimethyl-4,7,10,13-tetraoxa-2-silatetradecane
- CAS:
- 864079-63-0
- MF:
- C11H26O4Si
- MW:
- 250.41
- Mol File:
- 864079-63-0.mol
More
Less
2,2-Dimethyl-4,7,10,13-tetraoxa-2-silatetradecane Chemical Properties
- Boiling point:
- 245°C
- form
- liquid
- color
- colorless
- Sensitive
- air sensitive, moisture sensitive
- Hydrolytic Sensitivity
- 4: no reaction with water under neutral conditions
More
Less
2,2-Dimethyl-4,7,10,13-tetraoxa-2-silatetradecane Usage And Synthesis
Uses
Organosilicon Electrolytes for Lithium Ion Batteries
- Silicon based electrolytes with polyethylene glycol oligomers improve thermal and electrochemical stability of lithium-ion batteries;
- Increases battery long-term stability;
- Are less flammable than conventional organic carbonate-based solvents and maintain the safe operation of batteries;
- Improves conductivity and kinetics of the lithium salts;
- Viscosity 2.0 cP at 25°C; Conductivity of 0.8M LiBOB electrolyte: 1.29 x 10 –3 S cm–1 at 25°C.Boiling point 245°C; Glass transition temperature -110°C.
- Soluble electrolytic lithium salts: LiBOB, LiPF6 (03-0325), and LiTFSI
- ANL-1S1M3 is non-hydrolyzable and less flammable than the alkoxysilane counterparts.
- ANL-1S1M3 electrolyte cell test demonstrated good cycling performance in lithium-ion batteries, with a charge and discharge rate of C/5, cycled between 3.0 and 4.2 V at room temperature with only 9% capacity loss over 200 cycles.