MANGANESE ALUMINIDE Chemical Properties

form 

Lumps

Water Solubility 

Insoluble in water.

Exposure limits

ACGIH: TWA 0.02 mg/m3; TWA 0.1 mg/m3
OSHA: Ceiling 5 mg/m3
NIOSH: IDLH 500 mg/m3; TWA 1 mg/m3; STEL 3 mg/m3

EPA Substance Registry System

Aluminum, compd. with manganese (3:1) (12253-13-3)

Safety Information

TSCA 

Yes

MSDS

• Language:English Provider:ALFA

MANGANESE ALUMINIDE Usage And Synthesis

Uses

Al8Mn5 particles were in situ formed in an Mg-Al alloy with Mn addition. It was found that increasing Mn content or melting temperature promoted the formation of Al8Mn5, and also the segregation tendency of these in situ formed aluminide particles. A manganese aluminide spherical magnet was used as a projectile, with a diameter of 1 mm, it was accelerated by a so-called ?micro? two-stage light gas gun in the velocity range of 3-4km/s in Fragmentation and dispersion of aluminum nitride ceramic plates by hypervelocity impact .

MANGANESE ALUMINIDE(12253-13-3)Related Product Information

• Rubidium chloride
• Aluminum phosphide
• Magnesium chloride hexahydrate
• ZINC TELLURIDE
• JM-21 MULTI-ELEMENT OIL BASED STANDARD
• MANGANESE ALUMINATE
• MANGANESE ALUMINIDE
• ALUMINUM, ALLOY 3003
• Sanicro 31
• GROUND AND WASTE WATER POLLUTION STANDARD SOLUTION 1
• ALUMEL