1,4-DIBROMO-2,5-DIIODOBENZENE
1,4-DIBROMO-2,5-DIIODOBENZENE Basic information
- Product Name:
- 1,4-DIBROMO-2,5-DIIODOBENZENE
- Synonyms:
-
- 1,4-DIBROMO-2,5-DIIODOBENZENE
- 1,4-dibroMo-2,5-diiodobenzenex
- 1,4-Dibromo-2,5-diiodobenzene 99%
- 1,4-Dibromo-2,5-diiodobenzene99%
- Benzene, 1,4-dibromo-2,5-diiodo-
- OC1702, 1,4-Dibromo-2,5-diiodobenzene
- JACS-63262-06-6
- 1,4-Dibromo-2,5-diiodobenzene>
- CAS:
- 63262-06-6
- MF:
- C6H2Br2I2
- MW:
- 487.7
- Product Categories:
-
- Aryl
- Organohalides
- BB16
- Mol File:
- 63262-06-6.mol
1,4-DIBROMO-2,5-DIIODOBENZENE Chemical Properties
- Melting point:
- 163-165℃
- Boiling point:
- 377.2±42.0 °C(Predicted)
- Density
- 2.938
- storage temp.
- 2-8°C(protect from light)
- solubility
- soluble in Toluene
- form
- powder to crystal
- color
- White to Almost white
- Sensitive
- Light Sensitive
- InChI
- InChI=1S/C6H2Br2I2/c7-3-1-5(9)4(8)2-6(3)10/h1-2H
- InChIKey
- IVKPEQAIHJWGGT-UHFFFAOYSA-N
- SMILES
- C1(Br)=CC(I)=C(Br)C=C1I
Safety Information
- Hazard Codes
- Xi
- HS Code
- 2903998090
1,4-DIBROMO-2,5-DIIODOBENZENE Usage And Synthesis
Uses
1,4-Dibromo-2,5-diiodobenzene is a useful synthetic intermediate in the synthesis of Benzo[1,2-b:4,5-b'']dithiophene (B200100); a reagent in the synthesis of high-crystalline medium-band-gap polymers used for organic photovoltaic cells. Benzo[1,2-b:4,5-b'']dithiophene is also a precursor in the preparation of benzodithiophene derivatives which are useful as hole injection material, hole transport material, or fluorescent material in organic electroluminescence devices.
Synthesis
106-37-6
63262-06-6
General procedure for the synthesis of 1,4-dibromo-2,5-diiodobenzene from 1,4-dibromobenzene: In a three-necked flask equipped with a 1-liter mechanical stirrer, 16.7 g (73.0 mmol) of periodic acid and 525 ml of sulfuric acid were added. After the periodate was completely dissolved, 36.4 g (219 mmol) of potassium iodide was added in batches. The reaction mixture was cooled to -30°C, followed by the slow addition of 34.5 g (146 mmol) of 1,4-dibromobenzene over 5 min. The resulting mixture was stirred continuously at -25°C for 36 hours. Upon completion of the reaction, the mixture was poured into 2 Kg of ice and the solid product was collected by filtration. The solid was dissolved in chloroform and the organic phase was washed sequentially with 5% aqueous sodium hydroxide and deionized water, then dried with anhydrous magnesium sulfate. After concentration under reduced pressure, the residue was recrystallized by chloroform to give 36.0 g of white crystals (50% yield).1H NMR (CDCl3, 21 °C): δ = 8.02 (s, 2H). The 1H NMR spectrum was consistent with the data reported in the literature for 1,4-dibromo-2,5-diiodobenzene, confirming the successful synthesis of the target product.
References
[1] Organic Letters, 2009, vol. 11, # 20, p. 4656 - 4659
[2] Journal of Organic Chemistry, 2003, vol. 68, # 23, p. 8750 - 8766
[3] Journal of the American Chemical Society, 2011, vol. 133, # 10, p. 3284 - 3287
[4] Patent: CN106543216, 2017, A. Location in patent: Paragraph 0023; 0024; 0036; 0043
[5] Patent: CN108117563, 2018, A. Location in patent: Paragraph 0028; 0029; 0030
1,4-DIBROMO-2,5-DIIODOBENZENESupplier
- Tel
- 0411-0411-00000000 13644282108
- 3500508746@qq.com
- Tel
- 0714-6352055 15897769779
- sales@healthdaychem.com
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 021-67121386
- Sales-CN@TCIchemicals.com
- Tel
- 847-367-3680
- sales@arkpharminc.com