Antimony tribromide Chemical Properties

Melting point:

97 °C

Boiling point:

280 °C

Density 

4.15 g/mL at 25 °C(lit.)

vapor pressure 

1 mm Hg ( 94 °C)

refractive index 

1.74

Flash point:

280°C

solubility 

Soluble in dilute hydrochloric acid, hydrobromic acid, carbon disulfide, alcohol, acetone, ammonia, benzene, chloroform.

form 

Powder

Specific Gravity

4.15

color 

White

Water Solubility 

decomposed by H2O; soluble dilute HCl, HBr [HAW93] [MER06]

Sensitive 

Moisture Sensitive

Merck 

14,706

Exposure limits

ACGIH: TWA 0.5 mg/m3
NIOSH: IDLH 50 mg/m3; TWA 0.5 mg/m3

Dielectric constant

20.899999999999999

CAS DataBase Reference

7789-61-9(CAS DataBase Reference)

EPA Substance Registry System

Antimony tribromide (7789-61-9)

Safety Information

Hazard Codes 

Xn,N

Risk Statements 

20/22-51/53

Safety Statements 

61

RIDADR 

UN 3260 8/PG 2

WGK Germany 

2

RTECS 

CC4400000

TSCA 

Yes

HazardClass 

8

PackingGroup 

II

HS Code 

2827590000

Hazardous Substances Data

7789-61-9(Hazardous Substances Data)

MSDS

• Language:English Provider:ACROS
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Antimony tribromide Usage And Synthesis

Description

Antimony tribromide is a nonflammable, colorless to yellow crystalline solid. Molecular weight= 361.51.Boiling point= 288℃ at 749 mmHg; Freezing/Meltingpoint=96.6℃; Specific gravity= 4.148 at 23℃; Criticaltemperature= 904.5℃; Critical pressure= 5.67 MN/m2;Heat of vaporization= 53.2 kJ/mol at 560℃; Vaporpressure= ,0.075 mmHg at 23℃. Hazard Identification(based on NFPA-704 M Rating System): Health 3,Flammability 0, Reactivity 1. Soluble in water, forms anacid.

Chemical Properties

Yellow Crystalline Powder

Chemical Properties

Antimony tribromide is a nonflammable, colorless to yellow crystalline solid dissolved in hydrobromic acid.

Uses

Analytical chemistry, mordant, manufacturing antimony salts.

Uses

Antimony(III) bromide is used in the production of other antimony compounds, in chemical analysis, as a mordant, and in dyeing. It can be added to polymers such as polyethylene as a fire retardant.

General Description

Antimony tribromide is the yellow crystalline solid dissolved in hydrobromic acid. Antimony tribromide is decomposed by water giving an antimony oxide and hydrobromic acid. Antimony tribromide is corrosive to metals and tissue. Antimony tribromide is used to make other antimony compounds, in chemical analysis, and in dyeing.

Air & Water Reactions

Water slowly hydrolyzes antimony tribromide to form antimony (III) oxide and hydrobromic acid. The dry powdered oxide ignites on heating in air [Mellor Vol. 9 425.1939].

Reactivity Profile

Acidic salts, such as ANTIMONY TRIBROMIDE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions.

Hazard

Toxic.

Health Hazard

TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.

Safety Profile

A poison. Corrosive to skin, eyes, and mucous membranes. Reaction with water liberates HBr and antimony trioxide. Can cause severe burns. See also ANTIMONY COMPOUNDS.

Potential Exposure

Antimony tribromide is used to make antimony salts; in dyeing, and analytical chemistry.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. If victim is conscious, administer water or milk. Do not induce vomiting.Medical observation is recommended for 24°48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering acorticosteroid spray.

storage

Color Code—Blue: Health Hazard/Poison: Store ina secure poison location. Prior to working with this chemicalyou should be trained on its proper handling and storage.Antimony Tribromide must be stored to avoid contact withpotassium, sodium, and bases (such as sodium hydroxide,potassium hydroxide, and ammonium hydroxide) since violent reactions occur. Store in tightly closed containers in acool, well-ventilated area away from water or moisture andheat.

Shipping

UN3141 Antimony compounds, inorganic, liquid, n.o.s, Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required.

Incompatibilities

Contact with water reacts, liberating antimony trioxide and hydrogen bromide. Dry trioxide material may explode if heated air. Heat forms toxic bromides. Antimony tribromide attacks various metals.

Waste Disposal

Encapsulate and bury at an approved chemical landfill. Unacceptable for disposal at sewage treatment plants. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.

Antimony tribromide(7789-61-9)Related Product Information

• ARSENIC (III) BROMIDE
• Diantimony trioxide
• Iodine pentafluoride
• ANTIMONY(V) CHLORIDE
• Lithium bromide
• Cesium bromide
• Sodium bromide
• Potassium bromide
• Manganese(II) bromide tetrahydrate
• TIN (II) BROMIDE
• Cerium(III) bromide hydrate
• Magnesium bromide hexahydrate
• TITANIUM(IV) BROMIDE
• NEODYMIUM(III) BROMIDE HYDRATE
• ALUMINUM ANTIMONIDE
• Antimony trichloride
• ANTIMONY (III) BUTOXIDE
• Antimony