2,6-DIAMINO-4-METHYL PYRIDINE Chemical Properties

Melting point:

85-86 °C

Boiling point:

312.5±37.0 °C(Predicted)

Density 

1.190±0.06 g/cm3(Predicted)

storage temp. 

Keep in dark place,Inert atmosphere,Room temperature

pka

6.79±0.35(Predicted)

2,6-DIAMINO-4-METHYL PYRIDINE Usage And Synthesis

Uses

4-Methylpyridine-2,6-diamine is a reactant in the preparation of N-(pyridin-2-yl) arylsulfonamides with potent 11β-hydroxysteroid dehydrogenase type 1 activity.

Synthesis

General procedure for the synthesis of 2,6-diamino-4-methylpyridine from 4-methylpyridine: General method: synthesis of 4-methylpyridine-2,6-diamine (1). Method A: 4-Methylpyridine (15 g, 161.1 mmol) was suspended in mineral oil (220 mL), sodium amide (27.0 g, 483.3 mmol, 3 eq.) was added and stirred overnight at room temperature. Subsequently, the homogeneous suspension was heated to 130 °C and maintained for 15 min, and the beginning of hydrogen precipitation was observed. The temperature was gradually increased to 160 °C over 30 min, the color of the suspension changed from light brown to dark brown and the mixture formed a foamy solid. Continuing heating to 200 °C over 30 min, hydrogen release accelerated and the color of the mixture changed to black. After 3 hours of reaction at 215 °C, complete consumption of the feedstock and completion of hydrogen release was confirmed by TLC (unfolding agent: ethyl acetate/methanol/acetic acid, 10:1:0.1) monitoring. The reaction mixture was cooled to room temperature, the black solid was collected by filtration and washed with petroleum ether (5 x 100 mL). Silica gel (100 g) and 96% ethanol (130 mL) were carefully added to the black solid and evaporated to dryness after 20 min. Subsequently, the solid was placed on top of a suction filter containing silica gel (300 g; ethyl acetate) and eluted using a gradient of ethyl acetate to ethyl acetate/isopropanol (8:1), the product grade was collected and evaporated. The brown residue was recrystallized with tert-butyl methyl ether/diisopropyl ether to give 13.1 g of target product 1 as gray crystals in 66% yield. Method B: The compound was prepared by a similar method to 1 using 2-amino-4-methylpyridine (15 g, 138.7 mmol) and sodium amide (16.2 g, 416.1 mmol, 3 equiv) as starting materials. Yield: 13.2 g (76%). Melting point: 100-102 °C. 1H NMR (DMSO-d6) δ: 5.46 (s, 2H, pyridine ring H), 5.21 (s, 4H, NH2), 1.95 (s, 3H, CH3). 13C{1H} NMR (DMSO-d6) δ: 158.7 (pyridine ring C), 148.1 (pyridine ring C), 96.2 (pyridine ring C). 20.7 (CH3).HRMS (ESI):[M + H]+, measured value 124.0869.Theoretically calculated value 124.0875 for C6H9N3.

References

[1] Tetrahedron Letters, 2016, vol. 57, # 3, p. 333 - 336
[2] Journal of Organic Chemistry, 2001, vol. 66, # 20, p. 6513 - 6522
[3] Journal of the American Chemical Society, 2015, vol. 137, # 25, p. 7998 - 8001
[4] Patent: WO2006/106423, 2006, A2. Location in patent: Page/Page column 29
[5] Journal of the American Chemical Society, 1947, vol. 69, p. 1147,1148

2,6-DIAMINO-4-METHYL PYRIDINE(38439-33-7)Related Product Information

• 2,6-DIAMINO-4-METHYL PYRIDINE
• 2,6-Diaminopyridine
• SALOR-INT L118109-1EA
• SALOR-INT L118117-1EA
• Amino-6-(N-methoxy-N-methylamino)-3,4,5-pyridinetricarbonitrile
• AURORA KA-6214
• AURORA KA-6201
• CHEMPACIFIC 38173
• SALOR-INT L118125-1EA
• 4-METHYL-3-NITROPYRIDINE-2,6-DIAMINE
• 3-FLUORO-4-METHYLPYRIDINE-2,6-DIAMINE
• 2-AMINO-4-(CYANOMETHYL)-6-PIPERIDIN-1-YLPYRIDINE-3,5-DICARBONITRILE
• 2-AMINO-4-(CYANOMETHYL)-6-MORPHOLIN-4-YLPYRIDINE-3,5-DICARBONITRILE
• SALOR-INT L135666-1EA
• 2-AMINO-4-(1-CYANO-2-PHENYLETHYL)-6-MORPHOLIN-4-YLPYRIDINE-3,5-DICARBONITRILE
• 2-AMINO-4-(1-CYANO-2-PHENYLETHYL)-6-PIPERIDIN-1-YLPYRIDINE-3,5-DICARBONITRILE
• 2-AMINO-4-[(Z)-1-CYANO-2-(4-METHOXYPHENYL)VINYL]-6-PIPERIDIN-1-YLPYRIDINE-3,5-DICARBONITRILE
• LABOTEST-BB LT00012626