Mineral oil standard mixture Type A and B for EN ISO 9377-2 Property

Density 

0.686 g/mL at 20 °C

Flash point:

-4 °C

Safety

Hazard Codes 

F,Xn,N

Risk Statements 

11-38-40-50/53-65-67

Safety Statements 

16-36/37-61-62

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H304May be fatal if swallowed and enters airways

H315Causes skin irritation

H336May cause drowsiness or dizziness

H351Suspected of causing cancer

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P273Avoid release to the environment.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P331Do NOT induce vomiting.

Mineral oil standard mixture Type A and B for EN ISO 9377-2 Chemical Properties,Usage,Production

Uses

It may be used as reference material in determination of total hydrocarbon index from water samples, which involves direct coupling between stir membrane extraction and infrared spectroscopy.', 'Mineral oil standard mixture type A and B for EN ISO 9377-2 has been used as a reference matrix spiking solution in the determination of total petroleum hydrocarbons in samples of sea sediments using gas chromatography coupled with flame ionization detection (GC-FID).', 'Refer to the productμs Certificate of Analysis for more information on a suitable instrument technique. Contact Technical Service for further support.