Cuprous thiocyanate Property

Melting point:

1084°C

Density 

2.84

vapor pressure 

0Pa at 20-50℃

storage temp. 

Sealed in dry,Room Temperature

solubility 

insoluble in H2O, dilute acid solutions,ethanol, acetone; soluble in ethyl ether

form 

Powder

color 

Off-white

Specific Gravity

2.843

Water Solubility 

Practically insoluble in water, alcohol. Soluble in NH{4}OH, ether

Merck 

14,2669

Solubility Product Constant (Ksp)

pKsp: 12.75

Exposure limits

ACGIH: TWA 1 mg/m3
NIOSH: IDLH 100 mg/m3; TWA 1 mg/m3

Stability:

Stable.

InChIKey

PDZKZMQQDCHTNF-UHFFFAOYSA-M

CAS DataBase Reference

1111-67-7(CAS DataBase Reference)

EPA Substance Registry System

Cuprous thiocyanate (1111-67-7)

Safety

Hazard Codes 

Xn,N

Risk Statements 

20/21/22-32-50/53-52/53

Safety Statements 

13-60-61-46-36/37

RIDADR 

UN 3077 9/PG 3

WGK Germany 

3

RTECS 

GL8955000

TSCA 

Yes

HazardClass 

9

HS Code 

2842908080

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P273Avoid release to the environment.

P391Collect spillage. Hazardous to the aquatic environment

P501Dispose of contents/container to..…

Cuprous thiocyanate Chemical Properties,Usage,Production

Chemical Properties

Copper(I) thiocyanate, CuSCN, [1111-67-7], MW 121.62, is a white powder when pure, but often the material of commerce is yellow. It is soluble in ammonia solution, alkali thiocyanate solutions, and diethyl ether, but it is only slightly soluble in water and dilute mineral acids. It is stable in air in the absence of moisture, but it slowly decomposes in the presence of moisture in air. It is used as an antifouling pigment.

Characteristics

Copper thiocyanate (CuSCN) is also a wide bandgap (3.6?eV) semiconductor and has a work function of about ?5.3?eV. The conductivity ranges between 10-2 and 10-3 S?cm-1, good stability, shows good transparency throughout the visible and near infrared spectrum. It has good chemical stability. It can be deposited through a solution processing approach at low temperature, making it compatible with flexible substrates. By using copper thiocyanate (CuSCN) instead of P3HT as the HTL, a higher device PCE was achieved. 

Uses

In marine antifouling paints; in primer compositions for explosives industry.

Uses

It is used as flame retardant. It is a good inorganic pigment, and is used as the antifouling paint for protecting the underwater surfaces of ships against vegetation. Manufacturing industrial chemicals, pharmaceuticals and also used in freezing solutions, electroplating , steel picking, printing, and corrosion inhibitor against acid gases.

Uses

The product can be prepared from Cu(CH₃COO)₂·H₂O, AgNO₃, NH₄NCS and im(im = imidazole). The structure and optical properties were reported. It is an air- and light-stable source of Cu(I).

Preparation

Copper(I) thiocyanate is prepared by the reaction of alkali metal thiocyanates with copper(I) chloride at 8090°C or by the reaction of copper(II) sulfate solutions with alkali metal thiocyanate in the presence of sulfite. It can also be prepared by precipitation from copper(II) salt solutions with hydrogen thiocyanate.

General Description

We are committed to bringing you Greener Alternative Products,which adhere to one or more of The 12 Principles of Greener Chemistry. This product is an enabling product used as a Hole Transport Material for high-performance solar cells and thus has been enhanced for energy efficiency. Click here for more information.

Potential Exposure

Used as a microbiocide and algaecide in antifouling paints. Used as a laboratory chemical and for making other chemicals. Some formulations may be designated Restricted Use Pesticide (RUP).

Shipping

UN3439 Nitriles, solid, toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required

Structure and conformation

At least two polymorphs of cuprous thiocyanate have been characterized by X-ray crystallography. They both feature copper(I) in a characteristic tetrahedral coordination geometry. The sulfur end of the SCN- ligand is triply bridging so that the coordination sphere for copper is CuS3N.

Incompatibilities

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides

Waste Disposal

Copper-containing soluble wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. If recovery is not feasible, the copper can be precipitated through the use of caustics and the sludge deposited in a chemical waste landfill. Copper-containing wastes can be concentrated to the point where copper can be electrolytically removed and reclaimed. If recovery is not feasible, the copper can be precipitated by alkali; the cyanide destroyed by alkaline oxidation yielding a sludge which can be sent to a chemical waste landfill. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office