Tantalum pentoxide Property

Melting point:

1872 °C

Density 

8.2 g/mL at 25 °C(lit.)

storage temp. 

Sealed in dry,Room Temperature

solubility 

insoluble in H2O, ethanol, acid solutions; sHF

form 

lumps

color 

White to white-beige

Specific Gravity

8.2

Resistivity

1.0 ∞ 10*12 (ρ/μΩ.cm)

Water Solubility 

Insoluble in water.

Crystal Structure

Trigonal

Merck 

14,9056

crystal system

Nogata

Space group

Pmm2

Lattice constant

a/nm	b/nm	c/nm	α/o	β/o	γ/o	V/nm3
0.3888	4.029	0.6198	90	90	90	0.9709

Dielectric constant

11.6（Ambient）

Exposure limits

OSHA: TWA 5 mg/m3
NIOSH: IDLH 2500 mg/m3; TWA 5 mg/m3; STEL 10 mg/m3

InChI

InChI=1S/5O.2Ta

InChIKey

PBCFLUZVCVVTBY-UHFFFAOYSA-N

SMILES

[Ta](=O)(=O)O[Ta](=O)=O

CAS DataBase Reference

1314-61-0(CAS DataBase Reference)

EPA Substance Registry System

Tantalum oxide (Ta2O5) (1314-61-0)

Safety

Hazard Codes 

Xi

Risk Statements 

36/37/38

Safety Statements 

37/39-26

WGK Germany 

-

RTECS 

WW5855000

TSCA 

Yes

HS Code 

28259085

Toxicity

LD50 orally in rats: 8000 mg/kg (Cochran)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H320Causes eye irritation

Precautionary statements

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P337+P313IF eye irritation persists: Get medical advice/attention.

Tantalum pentoxide Chemical Properties,Usage,Production

Chemical Properties

white to white-beige powder

Chemical Properties

Tantalum pentoxide, Ta2O5, is a white powder existing in two thermodynamically stable modifications. The orthorombic b-phase changes at 1,360 °C (2,480 °F) into the tetragonal a-modification. The existence of an e-modification has also been reported. Tantalum pentoxide reacts slowly with hot hydrofluoric acid but is insoluble in water and in most solutions of acids and alkalies. For analytical purposes, it can be dissolved by fusion with alkali hydroxides, alkali carbonates, and potassium pyrosulfate.

Physical properties

White orthorhombic crystal or powder; density 8.20 g/cm³; melts at 1,785°C; insoluble in water, ethanol and practically all acids; soluble in hydrofluoric acid; solubilized by fusion with caustic potash or potassium hydrogen sulfate.

Physical properties

Dielectric used in film supercapacitors. Tantalum oxide is a high-refractiveindex, low-absorption material used in making optical coatings in the near-UV (350 nm) to IR (8 μm). Insoluble in most chemicals except HF, HF-HNO₃ mixtures, oleum, fused alkali hydroxides (e.g., NaOH, KOH), and molten pyrosulfates.

Uses

Tantalum oxide is used to make optical glass for lenses and in electronic circuits.

Uses

Tantalum pentoxide is used in making high refractive index optical glass; as a dielectric film on tantalum for its use as a capacitor component and rectifier; and for preparing tantalum metal, its carbide, and many other tantalum compounds.

Uses

Tantalum pentoxide (Ta2O5) is used to make special optical glass, for lasers, and in electronic circuits.

Preparation

Tantalum pentoxide is obtained as an intermediate in extracting tantalum from the columbite-tantalite series of minerals. Also, the oxide can be made by heating Ta metal in oxygen or air at elevated temperatures.

General Description

Tantalum pentoxide is dielectric in nature making it useful for making capacitors in the electronics industry.

Hazard

TLV: 5 mg/m3.

Flammability and Explosibility

Non flammable

Safety Profile

Mildly toxic by ingestion. Incompatible with ClF3, BrF3, Li. See also TANTALUM.