Sulfacytine Property

Melting point:

166.5-168°; mp 104°

Boiling point:

496.8±47.0 °C(Predicted)

Density 

1.45±0.1 g/cm3(Predicted)

pka

6.9(at 25℃)

form 

Solid

color 

White to off-white

Safety

Hazardous Substances Data

17784-12-2(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Sulfacytine Chemical Properties,Usage,Production

Originator

Renoquid,Glenwood,US,1975

Uses

Antibacterial.

Uses

Sulfacytine is a soluble short-acting sulfonamide. Sulfacytine is used as an oral antibiotic.

Definition

ChEBI: Sulfacytine is a member of benzenes and a sulfonamide.

Manufacturing Process

The N-(N-acetylsulfanilyl)-1-ethylcytosine used as a starting material is prepared as follows: To a solution of 333 grams of 3-(ethylamino)propionitrile in 1,697.3 ml of 2 N hydrochloric acid is added 275 grams of potassium cyanate, the resulting solution is concentrated under reduced pressure to a syrup, and the syrup is heated at 90° to 100°C for 6 hours and then evaporated to dryness at 90° to 100°C under reduced pressure. The residue is extracted with 1,600 ml of hot absolute ethanol, and the extract is concentrated to 500 ml and chilled. The crystalline 1-(2-cyanoethyl)-1- ethylurea obtained is isolated, washed with cold absolute ethanol, and dried, melting point 88° to 91°C. This intermediate (58.7 grams) is added to a solution of 11.5 grams of sodium in 500 ml of methanol and the resulting solution is heated under reflux for 30 minutes. After cooling, the mixture, containing 1-ethyl-5,6-dihydrocytosine, is treated with a slight excess of gaseous hydrogen bromide and evaporated to dryness. The residue is extracted, first with 500 ml, then with 100 ml of hot isopropyl alcohol, the extracts are combined and chilled, and the crystalline 1-ethyl-5,6-dihydrocytosine hydrobromide obtained is isolated and dried, MP 167.5° to 169.5°C. This salt (88.8 grams) is dissolved in 200 ml of nitrobenzene at 174°C, 22.6 ml of bromine is added over a period of 8 minutes, and the mixture is kept at 170° to 175°C until hydrogen bromide evolution ceases (about 15 minutes). Upon cooling, there is obtained crude 1-ethylcytosine hydrobromide, which is isolated, washed with ether, and dried, MP 170° to 187°C.
This salt is heated at 90° to 100°C with 70 ml of N,N-dimethylformamide and 60 ml of piperidine, and the resulting solution is chilled to give 1- ethylcytosine, MP 238° to 243°C. A mixture of 10.5 grams of 1-ethylcytosine, 18.6 grams of N-acetylsulfanilyl chloride, and 50 ml of pyridine is stirred at room temperature for 2 days. The precipitated solid is removed by filtration, and the filtrate is evaporated at 60°C under reduced pressure to a syrup. The syrup is triturated with 0.25N hydrochloric acid, and the solid N-(N-acetylsulfanilyl)- 1-ethylcytosine obtained is isolated and dried. This solid is suitable for use without further purification.
A solution of 65 grams of N-(N-acetylsulfanilyl)-1-ethylcytosine in 380 ml of 2 N aqueous sodium hydroxide is heated under reflux for 1 hour. Upon cooling, the solution is treated with charcoal, purified by filtration, and acidified with acetic acid. The solid N-sulfanilyl-1-ethylcytosine that precipitates is isolated, washed with water, and dried, MP 166.5° to 168°C following successive crystallizations from butyl alcohol and from methanol.

brand name

Renoquid (Glenwood).

Therapeutic Function

Antibacterial